Opened 8 months ago

Last modified 8 months ago

#1310 new defect

WDC WD80EFAX - error badly formed scsi parameters

Reported by: xperry Owned by:
Priority: minor Milestone: undecided
Component: all Version: 7.0
Keywords: linux scsi Cc: petr.rychly@…

Description (last modified by Christian Franke)

This disk is supported but reports "scsi error badly formed scsi parameters""

WDC WD80EFAX-68KNBN0
Firmware Version: 81.00A81

smartctl -x /dev/sde
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-42-generic] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD80EFAX-68KNBN0
Serial Number:    ********
LU WWN Device Id: ******************
Firmware Version: 81.00A81
User Capacity:    8 001 563 222 016 bytes [8,00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Mar 27 15:14:48 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     164 (intermediate level without standby)
Rd look-ahead is: Enabled
Write cache is:   Enabled
DSN feature is:   Unavailable
ATA Security is:  Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters
Wt Cache Reorder: Unknown (SCT Feature Control command failed)

Read SMART Data failed: scsi error badly formed scsi parameters

=== START OF READ SMART DATA SECTION ===
SMART Status command failed: scsi error badly formed scsi parameters
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.

Read SMART Log Directory failed: scsi error badly formed scsi parameters

ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters
Read GP Log Directory failed

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

Read SMART Error Log failed: scsi error badly formed scsi parameters

SMART Extended Self-test Log (GP Log 0x07) not supported

Read SMART Self-test Log failed: scsi error badly formed scsi parameters

Selective Self-tests/Logging not supported

SCT Status Version:                  3
SCT Version (vendor specific):       256 (0x0100)
Device State:                        Active (0)
Current Temperature:                     0 Celsius
Power Cycle Min/Max Temperature:     -3/ 3 Celsius
Lifetime    Min/Max Temperature:      0/ 0 Celsius
Under/Over Temperature Limit Count:   0/0

Write SCT Data Table failed: scsi error badly formed scsi parameters
Read SCT Temperature History failed

Write SCT (Get) Error Recovery Control Command failed: scsi error badly formed scsi parameters
SCT (Get) Error Recovery Control command failed

Device Statistics (GP/SMART Log 0x04) not supported

Pending Defects log (GP Log 0x0c) not supported

ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error badly formed scsi parameters
Read SATA Phy Event Counters failed

Attachments (1)

smartctl-Western Digital WDC WD80EFAX-68KNBN0.txt (2.7 KB) - added by xperry 8 months ago.
output of the smartctl -q noserial -x /dev/sde

Download all attachments as: .zip

Change History (6)

Changed 8 months ago by xperry

output of the smartctl -q noserial -x /dev/sde

comment:1 Changed 8 months ago by Christian Franke

Description: modified (diff)

comment:2 Changed 8 months ago by Christian Franke

Component: smartctlall
Keywords: linux added; WD80EFAX removed
Milestone: undecided
Priority: majorminor

Possibly related: tickets #819, #826 and #1070.

If possible, please test whether the problem also occurs with another disk model on same interface and/or with this disk on another machine.

comment:3 Changed 8 months ago by xperry

This problem doesn't occure with another disk (WD4002FFWX-60) on same interface:

smartctl -q noserial -a /dev/sde
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-42-generic] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Model Family: Western Digital Red Pro
Device Model: WDC WD4002FFWX-68TZ4N0
Firmware Version: 83.H0A83
User Capacity: 4 000 787 030 016 bytes [4,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Mar 31 12:23:04 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values:
...

SMART Attributes Data Structure revision number: 16
...
SMART Error Log Version: 1
No Errors Logged

Version 0, edited 8 months ago by xperry (next)

comment:4 Changed 8 months ago by xperry

Output of the

smartctl -r ioctl,2 -i -H -A /dev/sde

command:

smartctl 7.0 2018-12-30 r4883 [x86_64-linux-5.3.0-42-generic] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

sde -> /sys/class/scsi_host/host5/proc_name: "ahci"
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [inquiry: 12 00 00 00 24 00 ]
  scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
  sg_info=0x0  sg_duration=0 milliseconds  resid=0
  Incoming data, len=36:
 00     00 00 05 02 5b 00 00 02  41 54 41 20 20 20 20 20
 10     57 44 43 20 57 44 38 30  45 46 41 58 2d 36 38 4b
 20     30 41 38 31
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
  scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
  sg_info=0x0  sg_duration=0 milliseconds  resid=0
  Incoming data, len=512 [only first 256 bytes shown]:
 00     5a 04 ff 3f 37 c8 10 00  00 00 00 00 3f 00 00 00
 10     00 00 00 00 44 56 34 48  42 59 44 42 20 20 20 20
 20     20 20 20 20 20 20 20 20  03 00 00 00 38 00 31 38
 30     30 2e 41 30 31 38 44 57  20 43 44 57 30 38 46 45
 40     58 41 36 2d 4b 38 42 4e  30 4e 20 20 20 20 20 20
 50     20 20 20 20 20 20 20 20  20 20 20 20 20 20 10 80
 60     00 40 00 2f 00 40 00 02  00 02 07 00 ff 3f 10 00
 70     3f 00 10 fc fb 00 00 59  ff ff ff 0f 00 00 07 04
 80     03 00 78 00 78 00 78 00  78 00 08 0d 00 00 00 00
 90     00 00 00 00 00 00 1f 00  0e 97 76 00 de 0c 40 00
 a0     fc 03 29 00 6b 74 69 7d  73 47 69 74 49 bc 73 47
 b0     7f 00 71 81 00 00 a4 00  00 00 00 00 00 00 08 00
 c0     ca 00 f9 00 10 27 00 00  b0 2a 81 a3 03 00 00 00
 d0     ca 00 00 00 00 40 87 5a  00 50 a0 cc d0 bb 3a 57
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 dc 40
 f0     1c 40 00 00 00 00 00 00  00 00 00 00 00 00 00 00
/dev/sde [SAT]: Device open changed type from 'scsi' to 'sat'

REPORT-IOCTL: Device=/dev/sde Command=IDENTIFY DEVICE
 Input:   FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ]
  scsi_status=0x0, sg_transport_status=0x0, sg_driver_status=0x0
  sg_info=0x0  sg_duration=0 milliseconds  resid=0
  Incoming data, len=512 [only first 256 bytes shown]:
 00     5a 04 ff 3f 37 c8 10 00  00 00 00 00 3f 00 00 00
 10     00 00 00 00 44 56 34 48  42 59 44 42 20 20 20 20
 20     20 20 20 20 20 20 20 20  03 00 00 00 38 00 31 38
 30     30 2e 41 30 31 38 44 57  20 43 44 57 30 38 46 45
 40     58 41 36 2d 4b 38 42 4e  30 4e 20 20 20 20 20 20
 50     20 20 20 20 20 20 20 20  20 20 20 20 20 20 10 80
 60     00 40 00 2f 00 40 00 02  00 02 07 00 ff 3f 10 00
 70     3f 00 10 fc fb 00 00 59  ff ff ff 0f 00 00 07 04
 80     03 00 78 00 78 00 78 00  78 00 08 0d 00 00 00 00
 90     00 00 00 00 00 00 1f 00  0e 97 76 00 de 0c 40 00
 a0     fc 03 29 00 6b 74 69 7d  73 47 69 74 49 bc 73 47
 b0     7f 00 71 81 00 00 a4 00  00 00 00 00 00 00 08 00
 c0     ca 00 f9 00 10 27 00 00  b0 2a 81 a3 03 00 00 00
 d0     ca 00 00 00 00 40 87 5a  00 50 a0 cc d0 bb 3a 57
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 dc 40
 f0     1c 40 00 00 00 00 00 00  00 00 00 00 00 00 00 00
REPORT-IOCTL: Device=/dev/sde Command=IDENTIFY DEVICE returned 0

===== [IDENTIFY DEVICE] DATA START (BASE-16) =====
000-015: 5a 04 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |Z..?7.......?...|
016-031: 00 00 00 00 44 56 34 48 42 59 44 42 20 20 20 20 |....DV4HBYDB    |
032-047: 20 20 20 20 20 20 20 20 03 00 00 00 38 00 31 38 |        ....8.18|
048-063: 30 2e 41 30 31 38 44 57 20 43 44 57 30 38 46 45 |0.A018DW CDW08FE|
064-079: 58 41 36 2d 4b 38 42 4e 30 4e 20 20 20 20 20 20 |XA6-K8BN0N      |
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 |              ..|
096-111: 00 40 00 2f 00 40 00 02 00 02 07 00 ff 3f 10 00 |.@./.@.......?..|
112-127: 3f 00 10 fc fb 00 00 59 ff ff ff 0f 00 00 07 04 |?......Y........|
128-143: 03 00 78 00 78 00 78 00 78 00 08 0d 00 00 00 00 |..x.x.x.x.......|
144-159: 00 00 00 00 00 00 1f 00 0e 97 76 00 de 0c 40 00 |..........v...@.|
160-175: fc 03 29 00 6b 74 69 7d 73 47 69 74 49 bc 73 47 |..).kti}sGitI.sG|
176-191: 7f 00 71 81 00 00 a4 00 00 00 00 00 00 00 08 00 |..q.............|
192-207: ca 00 f9 00 10 27 00 00 b0 2a 81 a3 03 00 00 00 |.....'...*......|
208-223: ca 00 00 00 00 40 87 5a 00 50 a0 cc d0 bb 3a 57 |.....@.Z.P....:W|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 dc 40 |...............@|
240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............|
256-271: 05 00 0b 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 01 80 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 08 00 |................|
304-319: 52 57 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |RW..............|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 3d 00 00 00 |............=...|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 18 15 00 00 00 00 00 00 00 00 ff 10 21 00 |..............!.|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 b0 2a 81 a3 |.............*..|
464-479: 03 00 00 00 08 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 1e |................|
===== [IDENTIFY DEVICE] DATA END (512 Bytes) =====

=== START OF INFORMATION SECTION ===
Model Family:     Western Digital Red
Device Model:     WDC WD80EFAX-68KNBN0
Serial Number:    VDH4YBBD
LU WWN Device Id: 5 000cca 0bbd0573a
Firmware Version: 81.00A81
User Capacity:    8 001 563 222 016 bytes [8,00 TB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    5400 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Tue Mar 31 13:55:27 2020 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled


REPORT-IOCTL: Device=/dev/sde Command=SMART READ ATTRIBUTE VALUES
 Input:   FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [ata pass-through(16): 85 08 0e 00 d0 00 01 00 00 00 4f 00 c2 00 b0 00 ]
  scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
  sg_info=0x1  sg_duration=28 milliseconds  resid=0
  Incoming data, len=512 [only first 256 bytes shown]:
 00     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 10     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 20     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 30     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 40     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 50     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 60     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 70     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 80     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 90     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 a0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 b0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 c0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 d0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
 f0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00
  >>> Sense buffer, len=18:
 00     70 00 05 00 00 00 00 0a  04 51 00 00 21 04 00 00
 10     00 00
  status=2: sense_key=5 asc=21 ascq=4
sat_device::ata_pass_through: scsi error: badly formed scsi parameters
 [Duration: 0,026s]
REPORT-IOCTL: Device=/dev/sde Command=SMART READ ATTRIBUTE VALUES returned -1 errno=5 [scsi error badly formed scsi parameters]

===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) =====
000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) =====

Read SMART Data failed: scsi error badly formed scsi parameters

=== START OF READ SMART DATA SECTION ===

REPORT-IOCTL: Device=/dev/sde Command=SMART STATUS CHECK
 Input:   FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0
>>>> do_scsi_cmnd_io: sg_io_ver=3
 [ata pass-through(16): 85 06 2c 00 da 00 00 00 00 00 4f 00 c2 00 b0 00 ]
  scsi_status=0x2, sg_transport_status=0x0, sg_driver_status=0x8
  sg_info=0x1  sg_duration=32 milliseconds  resid=0
  >>> Sense buffer, len=18:
 00     70 00 05 00 00 00 00 0a  04 51 00 00 21 04 00 00
 10     00 00
  status=2: sense_key=5 asc=21 ascq=4
sat_device::ata_pass_through: scsi error: badly formed scsi parameters
 [Duration: 0,032s]
REPORT-IOCTL: Device=/dev/sde Command=SMART STATUS CHECK returned -1 errno=5 [scsi error badly formed scsi parameters]
SMART Status command failed: scsi error badly formed scsi parameters
SMART overall-health self-assessment test result: UNKNOWN!
SMART Status, Attributes and Thresholds cannot be read.


comment:5 Changed 8 months ago by xperry

And messages

journalctl -k --since "1 hours ago"
bře 31 13:19:48 petr-ubuntu-saturn kernel: i915 0000:00:02.0: fb0: i915drmfb frame buffer device
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: irq_stat 0x40000001
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: failed command: READ DMA EXT
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: cmd 25/00:08:00:2a:81/00:00:a3:03:00/e0 tag 8 dma 4096 in
                                                     res 51/04:08:00:2a:81/00:00:a3:03:00/40 Emask 0x1 (device error)
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: status: { DRDY ERR }
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: error: { ABRT }
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: failed to enable AA (error_mask=0x1)
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: failed to enable Sense Data Reporting, Emask 0x1
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: failed to enable AA (error_mask=0x1)
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: failed to enable Sense Data Reporting, Emask 0x1
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6.00: configured for UDMA/133 (device error ignored)
bře 31 13:19:48 petr-ubuntu-saturn kernel: ata6: EH complete
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: irq_stat 0x40000001
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed command: READ DMA EXT
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: cmd 25/00:08:00:2a:81/00:00:a3:03:00/e0 tag 5 dma 4096 in
                                                     res 51/04:08:00:2a:81/00:00:a3:03:00/40 Emask 0x1 (device error)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: status: { DRDY ERR }
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: error: { ABRT }
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable AA (error_mask=0x1)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable Sense Data Reporting, Emask 0x1
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable AA (error_mask=0x1)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable Sense Data Reporting, Emask 0x1
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: configured for UDMA/133 (device error ignored)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6: EH complete
bře 31 13:19:49 petr-ubuntu-saturn kernel: kvm: disabled by bios
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: irq_stat 0x40000001
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed command: READ DMA EXT
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: cmd 25/00:08:00:2a:81/00:00:a3:03:00/e0 tag 13 dma 4096 in
                                                     res 51/04:08:00:2a:81/00:00:a3:03:00/40 Emask 0x1 (device error)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: status: { DRDY ERR }
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: error: { ABRT }
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable AA (error_mask=0x1)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable Sense Data Reporting, Emask 0x1
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable AA (error_mask=0x1)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable Sense Data Reporting, Emask 0x1
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: configured for UDMA/133 (device error ignored)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6: EH complete
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: irq_stat 0x40000001
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed command: READ DMA EXT
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: cmd 25/00:08:00:2a:81/00:00:a3:03:00/e0 tag 10 dma 4096 in
                                                     res 51/04:08:00:2a:81/00:00:a3:03:00/40 Emask 0x1 (device error)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: status: { DRDY ERR }
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: error: { ABRT }
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable AA (error_mask=0x1)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable Sense Data Reporting, Emask 0x1
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable AA (error_mask=0x1)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: NCQ Send/Recv Log not supported
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: failed to enable Sense Data Reporting, Emask 0x1
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6.00: configured for UDMA/133 (device error ignored)
bře 31 13:19:49 petr-ubuntu-saturn kernel: ata6: EH complete
bře 31 13:19:49 petr-ubuntu-saturn kernel: kvm: disabled by bios
bře 31 13:19:52 petr-ubuntu-saturn kernel: rfkill: input handler disabled
bře 31 13:19:53 petr-ubuntu-saturn kernel: e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
bře 31 13:19:53 petr-ubuntu-saturn kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
bře 31 13:20:02 petr-ubuntu-saturn kernel: logitech-hidpp-device 0003:046D:4038.0004: HID++ 2.0 device connected.
root@petr-ubuntu-saturn:~# 

Note: See TracTickets for help on using tickets.