id summary reporter owner description type status priority milestone component version resolution keywords cc 1295 Unknown USB bridge [0x0860:0x0001], missing from database cyberpunkrocker Christian Franke "{{{ $ smartctl -a /dev/sda smartctl 7.1 2019-12-30 r5022 [armv7l-linux-4.19.97-1-ARCH] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sda: Unknown USB bridge [0x0860:0x0001 (0x100)] }}} The device in question is an USB-to-M.2_SATA_SSD interface card meant to be used with Raspberry Pi. It works with '-d sat'. {{{ $ smartctl -a -d sat /dev/sda smartctl 7.1 2019-12-30 r5022 [armv7l-linux-4.19.97-1-ARCH] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: WD Blue and Green SSDs Device Model: WDC WDS500G2B0B-00YS70 Serial Number: 190676801577 LU WWN Device Id: 5 001b44 8b9fa062c Firmware Version: 401000WD User Capacity: 500 107 862 016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Feb 4 12:53:48 2020 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled }}} {{{ $ lsusb -v --- Bus 001 Device 005: ID 0860:0001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0860 idProduct 0x0001 bcdDevice 1.00 iManufacturer 2 SupTronics iProduct 3 X860 iSerial 1 201907000005 --- Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk-Only iInterface 0 }}} " enhancement closed minor Release 7.2 drivedb 7.1 fixed usb