| 3 | |
| 4 | |
| 5 | {{{ |
| 6 | === START OF INFORMATION SECTION === |
| 7 | Model Family: Plextor M3/M5/M6 Series SSDs |
| 8 | Device Model: PLEXTOR PX-128M3 |
| 9 | Serial Number: 002150101377 |
| 10 | Add. Product Id: VAP9 |
| 11 | Firmware Version: 1.07 |
| 12 | User Capacity: 128,035,676,160 bytes [128 GB] |
| 13 | Sector Sizes: 512 bytes logical, 4096 bytes physical |
| 14 | Rotation Rate: Solid State Device |
| 15 | Device is: In smartctl database [for details use: -P show] |
| 16 | ATA Version is: ATA8-ACS, ATA/ATAPI-7 T13/1532D revision 4a |
| 17 | SATA Version is: SATA 3.0, 6.0 Gb/s |
| 18 | Local Time is: Sat Feb 8 18:24:26 2020 MST |
| 19 | SMART support is: Available - device has SMART capability. |
| 20 | SMART support is: Enabled |
| 21 | |
| 22 | === START OF READ SMART DATA SECTION === |
| 23 | SMART overall-health self-assessment test result: PASSED |
| 24 | |
| 25 | General SMART Values: |
| 26 | Offline data collection status: (0x00) Offline data collection activity |
| 27 | was never started. |
| 28 | Auto Offline Data Collection: Disabled. |
| 29 | Self-test execution status: ( 0) The previous self-test routine completed |
| 30 | without error or no self-test has ever |
| 31 | been run. |
| 32 | Total time to complete Offline |
| 33 | data collection: ( 10) seconds. |
| 34 | Offline data collection |
| 35 | capabilities: (0x15) SMART execute Offline immediate. |
| 36 | No Auto Offline data collection support. |
| 37 | Abort Offline collection upon new |
| 38 | command. |
| 39 | No Offline surface scan supported. |
| 40 | Self-test supported. |
| 41 | No Conveyance Self-test supported. |
| 42 | No Selective Self-test supported. |
| 43 | SMART capabilities: (0x0002) Does not save SMART data before |
| 44 | entering power-saving mode. |
| 45 | Supports SMART auto save timer. |
| 46 | Error logging capability: (0x00) Error logging supported. |
| 47 | General Purpose Logging supported. |
| 48 | Short self-test routine |
| 49 | recommended polling time: ( 1) minutes. |
| 50 | Extended self-test routine |
| 51 | recommended polling time: ( 10) minutes. |
| 52 | SCT capabilities: (0x003d) SCT Status supported. |
| 53 | SCT Error Recovery Control supported. |
| 54 | SCT Feature Control supported. |
| 55 | SCT Data Table supported. |
| 56 | |
| 57 | SMART Attributes Data Structure revision number: 1 |
| 58 | Vendor Specific SMART Attributes with Thresholds: |
| 59 | ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE |
| 60 | 1 Raw_Read_Error_Rate 0x0003 100 100 070 Pre-fail Always - 0 |
| 61 | 5 Reallocated_Sector_Ct 0x0003 100 100 000 Pre-fail Always - 16384 (0 22) |
| 62 | 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 12066 |
| 63 | 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 62 |
| 64 | 177 Wear_Leveling_Count 0x0003 100 100 000 Pre-fail Always - 32699 |
| 65 | 178 Used_Rsvd_Blk_Cnt_Chip 0x0003 100 100 000 Pre-fail Always - 88 |
| 66 | 181 Program_Fail_Cnt_Total 0x0003 100 100 000 Pre-fail Always - 0 |
| 67 | 182 Erase_Fail_Count_Total 0x0003 100 100 000 Pre-fail Always - 0 |
| 68 | 187 Reported_Uncorrect 0x0002 100 100 000 Old_age Always - 178 |
| 69 | 192 Power-Off_Retract_Count 0x0003 100 100 000 Pre-fail Always - 61 |
| 70 | 196 Reallocated_Event_Count 0x0003 100 100 000 Pre-fail Always - 178 |
| 71 | 198 Offline_Uncorrectable 0x0003 100 100 000 Pre-fail Always - 4 |
| 72 | 199 UDMA_CRC_Error_Count 0x0003 100 100 000 Pre-fail Always - 0 |
| 73 | 232 Available_Reservd_Space 0x0003 030 030 010 Pre-fail Always - 0 |
| 74 | |
| 75 | SMART Error Log Version: 1 |
| 76 | No Errors Logged |
| 77 | |
| 78 | SMART Self-test log structure revision number 1 |
| 79 | Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error |
| 80 | # 1 Extended offline Completed without error 00% 8495 - |
| 81 | |
| 82 | Selective Self-tests/Logging not supported |
| 83 | |
| 84 | }}} |