Drive Support - WDC WDS200T2B0A-00SM50

[BCCHR Support]

I can see the following drive isn't yet in the smartctl database for smartctl 7.0 2018-12-30 r4883. I've included output below.

[root@host:/root/smartmontools-7.0]# smartctl -d megaraid,20 /dev/sda -a
smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-693.21.1.el7.x86_64] (local build)
Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org

START OF INFORMATION SECTION

Device Model: WDC WDS200T2B0A-00SM50
Serial Number: 174901800006
LU WWN Device Id: 5 001b44 8b6844df6
Firmware Version: X61130WD
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Mar 7 10:17:53 2019 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

START OF READ SMART DATA SECTION

SMART Status not supported: ATA return descriptor not supported by controller firmware
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity

was never started.
Auto Offline Data Collection: Disabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever
been run.

Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.

No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.

SMART capabilities: (0x0003) Saves SMART data before entering

power-saving mode.
Supports SMART auto save timer.

Error logging capability: (0x01) Error logging supported.

General Purpose Logging supported.

Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.

SMART Attributes Data Structure revision number: 4
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE

5 Reallocated_Sector_Ct 0x0032 100 100 --- Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 --- Old_age Always - 8754

12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 35

165 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 77005621
166 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1
167 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 39
168 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 49
169 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 1237
170 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
171 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 0
173 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 18
174 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 22
184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0
188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0
194 Temperature_Celsius 0x0022 076 037 --- Old_age Always - 24 (Min/Max 18/37)
199 UDMA_CRC_Error_Count 0x0032 100 100 --- Old_age Always - 0
230 Unknown_SSD_Attribute 0x0032 100 100 --- Old_age Always - 1374411555152
232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100
233 Media_Wearout_Indicator 0x0032 100 100 --- Old_age Always - 37803
234 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 39878
241 Total_LBAs_Written 0x0030 253 253 --- Old_age Offline - 21669
242 Total_LBAs_Read 0x0030 253 253 --- Old_age Offline - 253116
244 Unknown_Attribute 0x0032 000 100 --- Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]

Selective Self-tests/Logging not supported