id,summary,reporter,owner,description,type,status,priority,milestone,component,version,resolution,keywords,cc 1034,Samsung SSD 860 EVO mSATA 500GB,RockyBoulder,Christian Franke,"Link to specifications: http://www.samsung.com/uk/memory-storage/860-evo-sata-3-msata-ssd/MZ-M6E500BW/ Controller: Samsung MJX Controller {{{ smartctl 6.6 2016-05-31 r4324 [aarch64-linux-4.4.126-rockchip-ayufan-221] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org Warning: DEFAULT entry missing in drive database file(s) === START OF INFORMATION SECTION === Device Model: Samsung SSD 860 EVO mSATA 500GB Firmware Version: RVT41B6Q User Capacity: 500.107.862.016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: mSATA Device is: Not in smartctl database [for details use: -P showall] ATA Version is: Unknown(0x09fc), ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 21 18:56:55 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 25 12 Power_Cycle_Count -O--CK 099 099 000 - 14 177 Wear_Leveling_Count PO--C- 100 100 000 - 0 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 059 045 000 - 41 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 12 241 Total_LBAs_Written -O--CK 099 099 000 - 268757238 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce-0xcf SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 25 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 34/46 Celsius Lifetime Min/Max Temperature: 32/46 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (50) Index Estimated Time Temperature Celsius 51 2018-05-20 21:40 36 ***************** ... ..( 2 skipped). .. ***************** 54 2018-05-20 22:10 36 ***************** 55 2018-05-20 22:20 37 ****************** 56 2018-05-20 22:30 46 *************************** 57 2018-05-20 22:40 42 *********************** 58 2018-05-20 22:50 39 ******************** 59 2018-05-20 23:00 38 ******************* ... ..( 2 skipped). .. ******************* 62 2018-05-20 23:30 38 ******************* 63 2018-05-20 23:40 40 ********************* 64 2018-05-20 23:50 39 ******************** 65 2018-05-21 00:00 37 ****************** 66 2018-05-21 00:10 36 ***************** 67 2018-05-21 00:20 35 **************** ... ..( 58 skipped). .. **************** 126 2018-05-21 10:10 35 **************** 127 2018-05-21 10:20 34 *************** 0 2018-05-21 10:30 34 *************** 1 2018-05-21 10:40 34 *************** 2 2018-05-21 10:50 35 **************** ... ..( 18 skipped). .. **************** 21 2018-05-21 14:00 35 **************** 22 2018-05-21 14:10 36 ***************** 23 2018-05-21 14:20 35 **************** 24 2018-05-21 14:30 35 **************** 25 2018-05-21 14:40 36 ***************** 26 2018-05-21 14:50 38 ******************* 27 2018-05-21 15:00 38 ******************* 28 2018-05-21 15:10 36 ***************** ... ..( 2 skipped). .. ***************** 31 2018-05-21 15:40 36 ***************** 32 2018-05-21 15:50 38 ******************* 33 2018-05-21 16:00 37 ****************** 34 2018-05-21 16:10 37 ****************** 35 2018-05-21 16:20 37 ****************** 36 2018-05-21 16:30 38 ******************* 37 2018-05-21 16:40 38 ******************* 38 2018-05-21 16:50 37 ****************** ... ..( 8 skipped). .. ****************** 47 2018-05-21 18:20 37 ****************** 48 2018-05-21 18:30 38 ******************* 49 2018-05-21 18:40 38 ******************* 50 2018-05-21 18:50 38 ******************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 14 --- Lifetime Power-On Resets 0x01 0x010 4 25 --- Power-on Hours 0x01 0x018 6 268757238 --- Logical Sectors Written 0x01 0x020 6 399822 --- Number of Write Commands 0x01 0x028 6 15332624 --- Logical Sectors Read 0x01 0x030 6 494469 --- Number of Read Commands 0x01 0x038 6 3562000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 41 --- Current Temperature 0x05 0x020 1 46 --- Highest Temperature 0x05 0x028 1 32 --- Lowest Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 11 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 0 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC }}} ",enhancement,closed,minor,Release 7.0,drivedb,6.6,fixed,,