# smartctl -x /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org /dev/sdb: Unknown USB bridge [0x1058:0x25e2 (0x4004)] Please specify device type with the -d option. Use smartctl -h to get a usage summary # smartctl -d sat -x /dev/sdb smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.9.0-4-amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD40NMZW-11GX6S1 Serial Number: WD-WX21D47E8DAD LU WWN Device Id: 5 0014ee 6b2735659 Firmware Version: 01.01A01 User Capacity: 4,000,753,472,000 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Dec 28 15:02:07 2017 MST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 1064) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 418) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 253 253 021 - 5166 4 Start_Stop_Count -O--CK 099 099 000 - 1573 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 9 Power_On_Hours -O--CK 097 097 000 - 2522 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 264 192 Power-Off_Retract_Count -O--CK 200 200 000 - 242 193 Load_Cycle_Count -O--CK 199 199 000 - 4231 194 Temperature_Celsius -O---K 120 095 000 - 32 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 274 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb6 GPL,SL VS 1 Device vendor specific log 0xb7 GPL,SL VS 58 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xcf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 28/38 Celsius Lifetime Min/Max Temperature: 19/57 Celsius Lifetime Average Temperature: 37 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (77) Index Estimated Time Temperature Celsius 78 2017-12-28 12:55 29 ********** ... ..( 45 skipped). .. ********** 124 2017-12-28 13:41 29 ********** 125 2017-12-28 13:42 30 *********** ... ..( 2 skipped). .. *********** 0 2017-12-28 13:45 30 *********** 1 2017-12-28 13:46 31 ************ 2 2017-12-28 13:47 31 ************ 3 2017-12-28 13:48 32 ************* 4 2017-12-28 13:49 32 ************* 5 2017-12-28 13:50 32 ************* 6 2017-12-28 13:51 ? - 7 2017-12-28 13:52 32 ************* 8 2017-12-28 13:53 32 ************* 9 2017-12-28 13:54 33 ************** ... ..( 3 skipped). .. ************** 13 2017-12-28 13:58 33 ************** 14 2017-12-28 13:59 34 *************** ... ..( 3 skipped). .. *************** 18 2017-12-28 14:03 34 *************** 19 2017-12-28 14:04 35 **************** ... ..( 8 skipped). .. **************** 28 2017-12-28 14:13 35 **************** 29 2017-12-28 14:14 34 *************** ... ..( 2 skipped). .. *************** 32 2017-12-28 14:17 34 *************** 33 2017-12-28 14:18 33 ************** ... ..( 5 skipped). .. ************** 39 2017-12-28 14:24 33 ************** 40 2017-12-28 14:25 32 ************* ... ..( 9 skipped). .. ************* 50 2017-12-28 14:35 32 ************* 51 2017-12-28 14:36 33 ************** ... ..( 2 skipped). .. ************** 54 2017-12-28 14:39 33 ************** 55 2017-12-28 14:40 34 *************** ... ..( 2 skipped). .. *************** 58 2017-12-28 14:43 34 *************** 59 2017-12-28 14:44 35 **************** ... ..( 4 skipped). .. **************** 64 2017-12-28 14:49 35 **************** 65 2017-12-28 14:50 34 *************** ... ..( 3 skipped). .. *************** 69 2017-12-28 14:54 34 *************** 70 2017-12-28 14:55 33 ************** ... ..( 6 skipped). .. ************** 77 2017-12-28 15:02 33 ************** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 3031381 Vendor specific