smartctl 6.6 2017-11-05 r4594 [armv7l-linux-4.9.61-1-ARCH] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Pro Device Model: WDC WD6001FFWX-68Z39N0 Firmware Version: 81.00A81 User Capacity: 6,001,175,126,016 bytes [6.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Nov 20 14:52:09 2017 GMT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 90) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 563) minutes. Conveyance self-test routine recommended polling time: ( 6) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 100 051 - 0 3 Spin_Up_Time POS--K 184 100 021 - 9758 4 Start_Stop_Count -O--CK 097 097 000 - 3763 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 100 100 000 - 0 9 Power_On_Hours -O--CK 082 082 000 - 13453 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 218 16 Unknown_Attribute -O---K 003 197 000 - 55859582177 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 200 100 000 - 3 193 Load_Cycle_Count -O--CK 199 100 000 - 3745 194 Temperature_Celsius -O---K 117 099 000 - 35 196 Reallocated_Event_Count -O--CK 200 100 000 - 0 197 Current_Pending_Sector -O--CK 200 100 000 - 0 198 Offline_Uncorrectable ----CK 200 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 8 Device Statistics Notification 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x12 GPL R/O 1 SATA NCQ Non-Data log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x24 GPL R/O 171 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xaf GPL,SL VS 16 Device vendor specific log 0xb0 GPL,SL VS 1 Device vendor specific log 0xb1-0xb5 GPL,SL VS 16 Device vendor specific log 0xb6 SL VS 16 Device vendor specific log 0xb7 GPL,SL VS 40 Device vendor specific log 0xb8-0xbf GPL,SL VS 16 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xde GPL VS 5502 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 13453 hours (560 days + 13 hours) When the command that caused the error occurred, the device was in standby mode. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 01 00 00 00 00 00 00 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 2f 00 00 00 01 00 00 00 00 00 00 00 00 4d+00:05:51.046 READ LOG EXT b0 00 d5 00 01 00 00 00 c2 4f 00 00 00 4d+00:05:45.939 SMART READ LOG ec 00 00 00 01 00 00 00 00 00 00 00 00 4d+00:05:45.868 IDENTIFY DEVICE e0 00 00 00 00 00 00 00 00 00 00 00 00 4d+00:03:15.618 STANDBY IMMEDIATE ea 00 00 00 00 00 00 00 00 00 00 00 00 4d+00:03:15.617 FLUSH CACHE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 13453 - # 2 Extended offline Completed without error 00% 13290 - # 3 Extended offline Interrupted (host reset) 70% 0 - # 4 Extended offline Completed without error 00% 13031 - # 5 Extended offline Completed without error 00% 12765 - # 6 Extended offline Interrupted (host reset) 10% 0 - # 7 Extended offline Interrupted (host reset) 90% 0 - # 8 Extended offline Completed without error 00% 11430 - # 9 Extended offline Completed without error 00% 11275 - #10 Extended offline Completed without error 00% 11107 - #11 Extended offline Completed without error 00% 10938 - #12 Extended offline Completed without error 00% 10770 - #13 Extended offline Completed without error 00% 10601 - #14 Extended offline Completed without error 00% 10435 - #15 Extended offline Completed without error 00% 10266 - #16 Extended offline Completed without error 00% 10099 - #17 Extended offline Completed without error 00% 9931 - #18 Extended offline Completed without error 00% 9764 - #19 Extended offline Completed without error 00% 9595 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 9/35 Celsius Lifetime Min/Max Temperature: 9/55 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (389) Index Estimated Time Temperature Celsius 390 2017-11-20 06:55 13 - ... ..( 98 skipped). .. - 11 2017-11-20 08:34 13 - 12 2017-11-20 08:35 14 - 13 2017-11-20 08:36 14 - 14 2017-11-20 08:37 15 - 15 2017-11-20 08:38 15 - 16 2017-11-20 08:39 16 - 17 2017-11-20 08:40 16 - 18 2017-11-20 08:41 16 - 19 2017-11-20 08:42 17 - ... ..( 2 skipped). .. - 22 2017-11-20 08:45 17 - 23 2017-11-20 08:46 18 - ... ..( 4 skipped). .. - 28 2017-11-20 08:51 18 - 29 2017-11-20 08:52 19 - 30 2017-11-20 08:53 20 * 31 2017-11-20 08:54 20 * 32 2017-11-20 08:55 19 - ... ..( 14 skipped). .. - 47 2017-11-20 09:10 19 - 48 2017-11-20 09:11 20 * ... ..( 12 skipped). .. * 61 2017-11-20 09:24 20 * 62 2017-11-20 09:25 21 ** ... ..( 2 skipped). .. ** 65 2017-11-20 09:28 21 ** 66 2017-11-20 09:29 20 * 67 2017-11-20 09:30 20 * 68 2017-11-20 09:31 20 * 69 2017-11-20 09:32 19 - 70 2017-11-20 09:33 19 - 71 2017-11-20 09:34 19 - 72 2017-11-20 09:35 18 - ... ..( 2 skipped). .. - 75 2017-11-20 09:38 18 - 76 2017-11-20 09:39 17 - ... ..( 4 skipped). .. - 81 2017-11-20 09:44 17 - 82 2017-11-20 09:45 16 - ... ..( 10 skipped). .. - 93 2017-11-20 09:56 16 - 94 2017-11-20 09:57 15 - ... ..( 42 skipped). .. - 137 2017-11-20 10:40 15 - 138 2017-11-20 10:41 16 - 139 2017-11-20 10:42 16 - 140 2017-11-20 10:43 17 - 141 2017-11-20 10:44 17 - 142 2017-11-20 10:45 17 - 143 2017-11-20 10:46 18 - 144 2017-11-20 10:47 18 - 145 2017-11-20 10:48 19 - ... ..( 3 skipped). .. - 149 2017-11-20 10:52 19 - 150 2017-11-20 10:53 20 * ... ..( 3 skipped). .. * 154 2017-11-20 10:57 20 * 155 2017-11-20 10:58 21 ** ... ..( 14 skipped). .. ** 170 2017-11-20 11:13 21 ** 171 2017-11-20 11:14 22 *** ... ..( 8 skipped). .. *** 180 2017-11-20 11:23 22 *** 181 2017-11-20 11:24 23 **** 182 2017-11-20 11:25 23 **** 183 2017-11-20 11:26 22 *** 184 2017-11-20 11:27 22 *** 185 2017-11-20 11:28 22 *** 186 2017-11-20 11:29 21 ** 187 2017-11-20 11:30 21 ** 188 2017-11-20 11:31 21 ** 189 2017-11-20 11:32 20 * ... ..( 2 skipped). .. * 192 2017-11-20 11:35 20 * 193 2017-11-20 11:36 19 - ... ..( 9 skipped). .. - 203 2017-11-20 11:46 19 - 204 2017-11-20 11:47 20 * ... ..( 4 skipped). .. * 209 2017-11-20 11:52 20 * 210 2017-11-20 11:53 21 ** ... ..( 12 skipped). .. ** 223 2017-11-20 12:06 21 ** 224 2017-11-20 12:07 22 *** ... ..( 10 skipped). .. *** 235 2017-11-20 12:18 22 *** 236 2017-11-20 12:19 23 **** 237 2017-11-20 12:20 22 *** ... ..( 2 skipped). .. *** 240 2017-11-20 12:23 22 *** 241 2017-11-20 12:24 21 ** 242 2017-11-20 12:25 21 ** 243 2017-11-20 12:26 21 ** 244 2017-11-20 12:27 20 * 245 2017-11-20 12:28 20 * 246 2017-11-20 12:29 20 * 247 2017-11-20 12:30 19 - ... ..( 6 skipped). .. - 254 2017-11-20 12:37 19 - 255 2017-11-20 12:38 20 * ... ..( 4 skipped). .. * 260 2017-11-20 12:43 20 * 261 2017-11-20 12:44 21 ** ... ..( 5 skipped). .. ** 267 2017-11-20 12:50 21 ** 268 2017-11-20 12:51 22 *** ... ..( 2 skipped). .. *** 271 2017-11-20 12:54 22 *** 272 2017-11-20 12:55 21 ** ... ..( 2 skipped). .. ** 275 2017-11-20 12:58 21 ** 276 2017-11-20 12:59 20 * ... ..( 2 skipped). .. * 279 2017-11-20 13:02 20 * 280 2017-11-20 13:03 19 - ... ..( 6 skipped). .. - 287 2017-11-20 13:10 19 - 288 2017-11-20 13:11 18 - ... ..( 10 skipped). .. - 299 2017-11-20 13:22 18 - 300 2017-11-20 13:23 19 - 301 2017-11-20 13:24 19 - 302 2017-11-20 13:25 20 * ... ..( 2 skipped). .. * 305 2017-11-20 13:28 20 * 306 2017-11-20 13:29 21 ** ... ..( 4 skipped). .. ** 311 2017-11-20 13:34 21 ** 312 2017-11-20 13:35 22 *** 313 2017-11-20 13:36 22 *** 314 2017-11-20 13:37 22 *** 315 2017-11-20 13:38 23 **** 316 2017-11-20 13:39 23 **** 317 2017-11-20 13:40 23 **** 318 2017-11-20 13:41 22 *** ... ..( 2 skipped). .. *** 321 2017-11-20 13:44 22 *** 322 2017-11-20 13:45 21 ** ... ..( 2 skipped). .. ** 325 2017-11-20 13:48 21 ** 326 2017-11-20 13:49 20 * ... ..( 5 skipped). .. * 332 2017-11-20 13:55 20 * 333 2017-11-20 13:56 19 - ... ..( 11 skipped). .. - 345 2017-11-20 14:08 19 - 346 2017-11-20 14:09 20 * ... ..( 2 skipped). .. * 349 2017-11-20 14:12 20 * 350 2017-11-20 14:13 21 ** 351 2017-11-20 14:14 21 ** 352 2017-11-20 14:15 22 *** ... ..( 2 skipped). .. *** 355 2017-11-20 14:18 22 *** 356 2017-11-20 14:19 23 **** ... ..( 4 skipped). .. **** 361 2017-11-20 14:24 23 **** 362 2017-11-20 14:25 24 ***** 363 2017-11-20 14:26 24 ***** 364 2017-11-20 14:27 25 ****** 365 2017-11-20 14:28 26 ******* 366 2017-11-20 14:29 26 ******* 367 2017-11-20 14:30 27 ******** 368 2017-11-20 14:31 27 ******** 369 2017-11-20 14:32 28 ********* 370 2017-11-20 14:33 28 ********* 371 2017-11-20 14:34 29 ********** 372 2017-11-20 14:35 29 ********** 373 2017-11-20 14:36 30 *********** 374 2017-11-20 14:37 30 *********** 375 2017-11-20 14:38 30 *********** 376 2017-11-20 14:39 32 ************* ... ..( 5 skipped). .. ************* 382 2017-11-20 14:45 32 ************* 383 2017-11-20 14:46 33 ************** 384 2017-11-20 14:47 33 ************** 385 2017-11-20 14:48 34 *************** ... ..( 2 skipped). .. *************** 388 2017-11-20 14:51 34 *************** 389 2017-11-20 14:52 35 **************** SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 218 -D- Lifetime Power-On Resets 0x01 0x010 4 13453 -D- Power-on Hours 0x01 0x018 6 21778793621 -D- Logical Sectors Written 0x01 0x020 6 50696114 -D- Number of Write Commands 0x01 0x028 6 34080788556 -D- Logical Sectors Read 0x01 0x030 6 65586918 -D- Number of Read Commands 0x01 0x038 6 1186159744 -D- Date and Time TimeStamp 0x01 0x048 2 317 ND- Workload Utilization 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 7078 -D- Spindle Motor Power-on Hours 0x03 0x010 4 7078 -D- Head Flying Hours 0x03 0x018 4 3749 -D- Head Load Events 0x03 0x020 4 200 ND- Number of Reallocated Logical Sectors 0x03 0x028 4 0 -D- Read Recovery Attempts 0x03 0x030 4 0 -D- Number of Mechanical Start Failures 0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 3 -D- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 -D- Current Temperature 0x05 0x010 1 16 -D- Average Short Term Temperature 0x05 0x018 1 44 -D- Average Long Term Temperature 0x05 0x020 1 54 -D- Highest Temperature 0x05 0x028 1 9 -D- Lowest Temperature 0x05 0x030 1 52 -D- Highest Average Short Term Temperature 0x05 0x038 1 14 -D- Lowest Average Short Term Temperature 0x05 0x040 1 50 -D- Highest Average Long Term Temperature 0x05 0x048 1 25 -D- Lowest Average Long Term Temperature 0x05 0x050 4 0 -D- Time in Over-Temperature 0x05 0x058 1 60 -D- Specified Maximum Operating Temperature 0x05 0x060 4 0 -D- Time in Under-Temperature 0x05 0x068 1 0 -D- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 559 -D- Number of Hardware Resets 0x06 0x010 4 316 -D- Number of ASR Events 0x06 0x018 4 0 -D- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 26 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 27 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 0 Vendor specific