smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.8-1-ARCH] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TOSHIBA MQ04UBF100 Serial Number: Z7LYSJGCS LU WWN Device Id: 0 000000 000000000 Firmware Version: JU002U User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 3.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jul 10 08:58:27 2018 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Disabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 170) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--K 100 100 001 - 2976 4 Start_Stop_Count -O--CK 100 100 000 - 14 5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--CK 100 100 000 - 1 10 Spin_Retry_Count PO--CK 100 100 030 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 8 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2 193 Load_Cycle_Count -O--CK 100 100 000 - 22 194 Temperature_Celsius -O---K 100 100 000 - 32 (Min/Max 23/48) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 220 Disk_Shift -O---- 100 100 000 - 0 222 Loaded_Hours -O--CK 100 100 000 - 1 223 Load_Retry_Count -O--CK 100 100 000 - 0 224 Load_Friction -O---K 100 100 000 - 0 226 Load-in_Time -OS--K 100 100 000 - 183 240 Head_Flying_Hours P----- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 2 Device Statistics Notification 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 32768 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa7 GPL VS 8 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 23/32 Celsius Lifetime Min/Max Temperature: 23/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: 0/60 Celsius Temperature History Size (Index): 478 (74) Index Estimated Time Temperature Celsius 75 2018-07-10 01:01 ? - ... ..(406 skipped). .. - 4 2018-07-10 07:48 ? - 5 2018-07-10 07:49 27 ******** 6 2018-07-10 07:50 27 ******** 7 2018-07-10 07:51 27 ******** 8 2018-07-10 07:52 28 ********* 9 2018-07-10 07:53 28 ********* 10 2018-07-10 07:54 28 ********* 11 2018-07-10 07:55 29 ********** ... ..( 2 skipped). .. ********** 14 2018-07-10 07:58 29 ********** 15 2018-07-10 07:59 ? - 16 2018-07-10 08:00 29 ********** 17 2018-07-10 08:01 30 *********** ... ..( 2 skipped). .. *********** 20 2018-07-10 08:04 30 *********** 21 2018-07-10 08:05 ? - 22 2018-07-10 08:06 30 *********** 23 2018-07-10 08:07 31 ************ 24 2018-07-10 08:08 31 ************ 25 2018-07-10 08:09 31 ************ 26 2018-07-10 08:10 ? - 27 2018-07-10 08:11 30 *********** 28 2018-07-10 08:12 31 ************ 29 2018-07-10 08:13 31 ************ 30 2018-07-10 08:14 31 ************ 31 2018-07-10 08:15 ? - 32 2018-07-10 08:16 31 ************ 33 2018-07-10 08:17 32 ************* 34 2018-07-10 08:18 34 *************** 35 2018-07-10 08:19 34 *************** 36 2018-07-10 08:20 35 **************** ... ..( 3 skipped). .. **************** 40 2018-07-10 08:24 35 **************** 41 2018-07-10 08:25 36 ***************** 42 2018-07-10 08:26 36 ***************** 43 2018-07-10 08:27 36 ***************** 44 2018-07-10 08:28 38 ******************* 45 2018-07-10 08:29 44 ************************* 46 2018-07-10 08:30 45 ************************** 47 2018-07-10 08:31 45 ************************** 48 2018-07-10 08:32 46 *************************** 49 2018-07-10 08:33 46 *************************** 50 2018-07-10 08:34 45 ************************** 51 2018-07-10 08:35 46 *************************** ... ..( 3 skipped). .. *************************** 55 2018-07-10 08:39 46 *************************** 56 2018-07-10 08:40 47 **************************** 57 2018-07-10 08:41 47 **************************** 58 2018-07-10 08:42 47 **************************** 59 2018-07-10 08:43 48 ***************************** ... ..( 3 skipped). .. ***************************** 63 2018-07-10 08:47 48 ***************************** 64 2018-07-10 08:48 ? - 65 2018-07-10 08:49 ? - 66 2018-07-10 08:50 ? - 67 2018-07-10 08:51 23 **** 68 2018-07-10 08:52 24 ***** 69 2018-07-10 08:53 26 ******* 70 2018-07-10 08:54 ? - 71 2018-07-10 08:55 26 ******* 72 2018-07-10 08:56 ? - 73 2018-07-10 08:57 30 *********** 74 2018-07-10 08:58 32 ************* SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 8 --- Lifetime Power-On Resets 0x01 0x010 4 1 --- Power-on Hours 0x01 0x018 6 141339340 --- Logical Sectors Written 0x01 0x020 6 86391 --- Number of Write Commands 0x01 0x028 6 411625 --- Logical Sectors Read 0x01 0x030 6 4179 --- Number of Read Commands 0x01 0x038 6 6596653 --- Date and Time TimeStamp 0x02 ===== = = === == Free-Fall Statistics (rev 1) == 0x02 0x010 4 0 --- Overlimit Shock Events 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 1 --- Spindle Motor Power-on Hours 0x03 0x010 4 1 --- Head Flying Hours 0x03 0x018 4 22 --- Head Load Events 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors 0x03 0x028 4 3 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x03 0x038 4 0 --- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 2 --- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 --- Current Temperature 0x05 0x010 1 - N-- Average Short Term Temperature 0x05 0x018 1 - N-- Average Long Term Temperature 0x05 0x020 1 48 --- Highest Temperature 0x05 0x028 1 23 --- Lowest Temperature 0x05 0x030 1 - N-- Highest Average Short Term Temperature 0x05 0x038 1 - N-- Lowest Average Short Term Temperature 0x05 0x040 1 - N-- Highest Average Long Term Temperature 0x05 0x048 1 - N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 0 --- Number of Hardware Resets 0x06 0x010 4 7 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x0007 4 0 R_ERR response for host-to-device non-data FIS 0x0008 4 0 Device-to-host non-data FIS retries 0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 0 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 4 0 R_ERR response for host-to-device data FIS, CRC 0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC