smartctl 6.2 2013-07-26 r3841 [x86_64-linux-4.4.0-96-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ADATA SP580 Firmware Version: V3.10 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 (unknown minor revision code: 0x011b) SATA Version is: SATA >3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Sep 30 22:47:41 2017 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x35) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. Conveyance self-test routine recommended polling time: ( 1) minutes. SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours PO--CK 100 100 010 - 0 12 Power_Cycle_Count PO--CK 100 100 010 - 1 161 Unknown_Attribute PO--CK 100 100 010 - 0 164 Unknown_Attribute PO--CK 100 100 010 - 0 165 Unknown_Attribute PO--CK 100 100 010 - 0 166 Unknown_Attribute PO--CK 100 100 010 - 0 167 Unknown_Attribute PO--CK 100 100 010 - 0 169 Unknown_Attribute PO--CK 100 100 010 - 0 176 Erase_Fail_Count_Chip PO--CK 100 100 010 - 0 177 Wear_Leveling_Count PO--CK 100 100 010 - 0 178 Used_Rsvd_Blk_Cnt_Chip PO--CK 100 100 010 - 0 192 Power-Off_Retract_Count PO--CK 100 100 010 - 0 194 Temperature_Celsius PO--CK 100 100 010 - 43 195 Hardware_ECC_Recovered PO--CK 100 100 010 - 0 199 UDMA_CRC_Error_Count PO--CK 100 100 010 - 0 241 Total_LBAs_Written PO--CK 100 100 010 - 0 242 Total_LBAs_Read PO--CK 100 100 010 - 69 243 Unknown_Attribute PO--CK 100 100 010 - 0 244 Unknown_Attribute PO--CK 100 100 010 - 0 245 Unknown_Attribute PO--CK 100 100 010 - 0 246 Unknown_Attribute PO--CK 100 100 010 - 0 250 Read_Error_Retry_Rate PO--CK 100 100 010 - 0 251 Unknown_Attribute PO--CK 100 100 010 - 0 252 Unknown_Attribute PO--CK 100 100 010 - 0 253 Unknown_Attribute PO--CK 100 100 010 - 0 254 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x10 GPL,SL R/O 1 NCQ Command Error log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test Log not supported Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) not supported