smartctl 6.6 2017-08-08 r4433 [x86_64-w64-mingw32-win7-sp1] (daily-20170808) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SKhynix SATA Client SC3xx Series Device Model: SKhynix SC300 HFS256G32MND-3210A Serial Number: FI57Q00391010761P LU WWN Device Id: 0 000000 000000000 Firmware Version: 20131P00 User Capacity: 256,060,514,304 bytes [256 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Sep 18 10:02:40 2017 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 18) minutes. SCT capabilities: (0x0001) SCT Status supported. SMART Attributes Data Structure revision number: 4 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 5 Retired_Block_Count 0x0033 100 100 005 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 262 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 6190 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Wear_Leveling_Count 0x0032 100 100 005 Old_age Always - 27 174 Unexpect_Power_Loss_Cnt 0x0032 100 100 000 Old_age Always - 6183 176 Unused_Rsvd_Blk_Cnt_Tot 0x0022 100 100 000 Old_age Always - 4074 181 Non4k_Aligned_Access 0x0022 100 100 000 Old_age Always - 938983 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 3 184 End-to-End_Error 0x003b 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 024 000 000 Old_age Always - 24 (Min/Max 0/36) 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 201 Percent_Lifetime_Remain 0x0023 100 100 005 Pre-fail Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 129 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 0 243 Total_Media_Writes 0x0032 100 100 000 Old_age Always - 905 SMART Error Log Version: 0 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.