smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win7-sp1] (sf-6.5-1) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SK hynix SATA Client SSD Device Model: SK hynix SC313 HFS256G32TNF-N3A0A Serial Number: EI77Q1098101A8G1D LU WWN Device Id: 5 ace42e 0201b55f7 Firmware Version: 70000P10 User Capacity: 256,060,514,304 bytes [256 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 (minor revision not indicated) SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Sep 25 14:51:52 2017 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 94) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 40) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 32 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 5 Retired_Block_Count 0x0033 100 100 005 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 16 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 36 100 Total_Erase_Count 0x0032 100 100 000 Old_age Always - 0 168 Min_Erase_Count 0x0032 100 100 000 Old_age Always - 0 169 Max_Erase_Count 0x0032 100 099 000 Old_age Always - 0 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Wear_Leveling_Count 0x0032 100 100 005 Old_age Always - 0 174 Unexpect_Power_Loss_Cnt 0x0032 100 100 000 Old_age Always - 0 175 Program_Fail_Count_Chip 0x0032 100 100 000 Old_age Always - 0 176 Unused_Rsvd_Blk_Cnt_Tot 0x0022 100 100 000 Old_age Always - 780 178 Used_Rsvd_Blk_Cnt_Chip 0x0032 100 100 000 Old_age Always - 0 179 Used_Rsvd_Blk_Cnt_Tot 0x0032 100 100 000 Old_age Always - 0 180 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 181 Non4k_Aligned_Access 0x0022 100 100 000 Old_age Always - 0 183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x003b 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 028 000 000 Old_age Always - 28 (Min/Max 26/33) 196 Reallocated_Event_Count 0x0032 100 100 036 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 201 Percent_Lifetime_Remain 0x0023 100 100 005 Pre-fail Always - 0 212 Phy_Error_Count 0x0032 100 100 000 Old_age Always - 54 241 Total_Writes_GiB 0x0032 100 100 000 Old_age Always - 0 242 Total_Reads_GiB 0x0032 100 100 000 Old_age Always - 0 243 Total_Media_Writes 0x0032 100 100 000 Old_age Always - 0 SMART Error Log Version: 0 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0x50) Completed without error 00% 15 - # 2 Short offline Completed without error 00% 5 - Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum. SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.