# /opt/smartmontools/5.40/sbin/smartctl -d 3ware,3 /dev/twl0 -x smartctl 5.40 2010-06-14 r3121 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda ES.2 Device Model: ST31000340NS Serial Number: 9QJ827CP Firmware Version: SN06 User Capacity: 1,000,204,886,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Wed Jul 28 17:20:26 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 634) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 228) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x103d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 082 064 044 Pre-fail Always - 176746153 3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 19 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always - 2284637 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 436 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always - 19 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 068 062 045 Old_age Always - 32 (Lifetime Min/Max 32/35) 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always - 32 (0 23 0 0) 195 Hardware_ECC_Recovered 0x001a 069 048 000 Old_age Always - 176746153 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 General Purpose Logging (GPL) feature set supported General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] GP/S Log at address 0x01 has 1 sectors [Summary SMART error log] GP/S Log at address 0x02 has 5 sectors [Comprehensive SMART error log] GP/S Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART error log] GP/S Log at address 0x06 has 1 sectors [SMART self-test log] GP/S Log at address 0x07 has 1 sectors [Extended self-test log] GP/S Log at address 0x09 has 1 sectors [Selective self-test log] GP/S Log at address 0x10 has 1 sectors [NCQ Command Error] GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x21 has 1 sectors [Write stream error log] GP/S Log at address 0x22 has 1 sectors [Read stream error log] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xa1 has 20 sectors [Device vendor specific log] GP Log at address 0xa2 has 2248 sectors [Device vendor specific log] GP/S Log at address 0xa8 has 65 sectors [Device vendor specific log] GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] GP Log at address 0xb0 has 2864 sectors [Device vendor specific log] GP Log at address 0xb6 has 1918 sectors [Device vendor specific log] GP Log at address 0xbe has 65535 sectors [Device vendor specific log] GP Log at address 0xbf has 65535 sectors [Device vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (5 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 399 - # 2 Extended offline Completed without error 00% 57 - # 3 Extended offline Completed without error 00% 24 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) SCT Support Level: 1 Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 33/34 Celsius Lifetime Min/Max Temperature: 23/38 Celsius Under/Over Temperature Limit Count: 0/2 SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (91) Index Estimated Time Temperature Celsius 92 2010-07-27 20:10 32 ************* ... ..( 13 skipped). .. ************* 106 2010-07-27 22:30 32 ************* 107 2010-07-27 22:40 31 ************ 108 2010-07-27 22:50 32 ************* 109 2010-07-27 23:00 32 ************* 110 2010-07-27 23:10 31 ************ 111 2010-07-27 23:20 31 ************ 112 2010-07-27 23:30 32 ************* 113 2010-07-27 23:40 32 ************* 114 2010-07-27 23:50 32 ************* 115 2010-07-28 00:00 31 ************ 116 2010-07-28 00:10 32 ************* ... ..( 14 skipped). .. ************* 3 2010-07-28 02:40 32 ************* 4 2010-07-28 02:50 33 ************** ... ..( 34 skipped). .. ************** 39 2010-07-28 08:40 33 ************** 40 2010-07-28 08:50 32 ************* ... ..( 5 skipped). .. ************* 46 2010-07-28 09:50 32 ************* 47 2010-07-28 10:00 33 ************** ... ..( 4 skipped). .. ************** 52 2010-07-28 10:50 33 ************** 53 2010-07-28 11:00 34 *************** ... ..( 10 skipped). .. *************** 64 2010-07-28 12:50 34 *************** 65 2010-07-28 13:00 35 **************** 66 2010-07-28 13:10 34 *************** ... ..( 6 skipped). .. *************** 73 2010-07-28 14:20 34 *************** 74 2010-07-28 14:30 35 **************** 75 2010-07-28 14:40 36 ***************** ... ..( 6 skipped). .. ***************** 82 2010-07-28 15:50 36 ***************** 83 2010-07-28 16:00 35 **************** 84 2010-07-28 16:10 35 **************** 85 2010-07-28 16:20 36 ***************** 86 2010-07-28 16:30 ? - 87 2010-07-28 16:40 31 ************ 88 2010-07-28 16:50 34 *************** 89 2010-07-28 17:00 ? - 90 2010-07-28 17:10 34 *************** 91 2010-07-28 17:20 33 ************** SCT Error Recovery Control: Read: 100 (10.0 seconds) Write: 100 (10.0 seconds) SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS