-bash-4.1# ./smartctl -A /dev/sdd smartctl 6.6 2017-03-11 r4410 [x86_64-linux-2.6.32-431.el6.x86_64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 9 Power_On_Hours 0x0032 096 096 000 Old_age Always - 3504 (0 5 0) 13 Lifetime_UECC_Ct 0x0012 100 100 001 Old_age Always - 8 32 Lifetime_Write_AmpFctr 0x0002 100 100 000 Old_age Always - 0 33 Write_AmpFctr 0x0002 100 100 000 Old_age Always - 100 170 Reserve_Erase_BlkCt 0x0032 100 100 000 Old_age Always - 11379 171 Program_Fail_Ct 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Ct 0x0032 100 100 000 Old_age Always - 0 175 Lifetime_Die_Failure_Ct 0x0032 100 100 000 Old_age Always - 0 178 SSD_LifeLeft(0.01%) 0x0012 100 100 000 Old_age Always - 7178 183 LT_Link_Rate_DwnGrd_Ct 0x0032 100 100 000 Old_age Always - 0 191 Clean_Shutdown_Ct 0x0032 100 100 000 Old_age Always - 17 192 Unclean_Shutdown_Ct 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 066 051 030 Old_age Always - 34 (Min/Max 22/49) 196 Lifetime_Retried_Blk_Ct 0x001b 100 100 010 Pre-fail Always - 0 211 Read_Disturb_ReallocEvt 0x0032 100 100 000 Old_age Always - 0 233 Lifetime_Nand_Writes 0x0032 100 100 000 Old_age Always - 107648 235 Capacitor_Health 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 0 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 0 244 Therm_Throt_Activation 0x0032 100 100 000 Old_age Always - 0 245 Drive_Life_Remaining% 0x0012 072 072 002 Old_age Always - 72 253 SPI_Test_Remaining 0x0012 100 100 001 Old_age Always - 0 -bash-4.1# ./smartctl -x /dev/sdd smartctl 6.6 2017-03-11 r4410 [x86_64-linux-2.6.32-431.el6.x86_64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Sandisk SATA Cloudspeed Max and GEN2 ESS SSDs Device Model: SDLF1DAR-480G-1HAW Serial Number: 20010963 LU WWN Device Id: 5 001173 10073e534 Firmware Version: ZR07RE41 User Capacity: 480,103,981,056 bytes [480 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4c SATA Version is: ATA8-AST, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Jul 10 19:32:55 2017 IST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART Status not supported: Incomplete response, ATA output registers missing SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 5040) seconds. Offline data collection capabilities: (0x5d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 1) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3504 (2 25 0) 13 Lifetime_UECC_Ct -O--C- 100 100 001 - 8 32 Lifetime_Write_AmpFctr -O---- 100 100 000 - 0 33 Write_AmpFctr -O---- 100 100 000 - 100 170 Reserve_Erase_BlkCt -O--CK 100 100 000 - 11379 171 Program_Fail_Ct -O--CK 100 100 000 - 0 172 Erase_Fail_Ct -O--CK 100 100 000 - 0 175 Lifetime_Die_Failure_Ct -O--CK 100 100 000 - 0 178 SSD_LifeLeft(0.01%) -O--C- 100 100 000 - 7178 183 LT_Link_Rate_DwnGrd_Ct -O--CK 100 100 000 - 0 191 Clean_Shutdown_Ct -O--CK 100 100 000 - 17 192 Unclean_Shutdown_Ct -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 066 051 030 - 34 (Min/Max 22/49) 196 Lifetime_Retried_Blk_Ct PO-RC- 100 100 010 - 0 211 Read_Disturb_ReallocEvt -O--CK 100 100 000 - 0 233 Lifetime_Nand_Writes -O--CK 100 100 000 - 107648 235 Capacitor_Health -O--CK 100 100 000 - 0 241 Total_LBAs_Written -O--CK 100 100 000 - 0 242 Total_LBAs_Read -O--CK 100 100 000 - 0 244 Therm_Throt_Activation -O--CK 100 100 000 - 0 245 Drive_Life_Remaining% -O--C- 072 072 002 - 72 253 SPI_Test_Remaining -O--C- 100 100 001 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 6 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL,SL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 8 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 2 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 12192 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 12192 [2] occurred at disk power-on lifetime: 3249 hours (135 days + 9 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 41 00 00 00 00 37 e4 36 00 00 00 Error: UNC at LBA = 0x37e43600 = 937702912 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 37 e4 36 00 40 00 00:00:00.003 READ FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:00.003 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:00.003 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:00.003 IDENTIFY DEVICE ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:00.003 IDENTIFY DEVICE Error 12191 [1] occurred at disk power-on lifetime: 1891 hours (78 days + 19 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 41 00 08 00 00 37 e4 36 08 00 00 Error: ABRT at LBA = 0x37e43608 = 937702920 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 f8 00 00 37 e4 36 00 40 00 00:00:00.004 READ FPDMA QUEUED ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:00.004 IDENTIFY DEVICE b4 00 00 00 00 00 00 00 00 00 00 00 00 00:00:00.004 SANITIZE DEVICE ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:00.004 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:00.004 IDENTIFY DEVICE Error 12190 [0] occurred at disk power-on lifetime: 1891 hours (78 days + 19 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 41 00 08 00 00 37 e4 36 08 00 00 Error: ABRT at LBA = 0x37e43608 = 937702920 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 58 00 00 37 e4 36 00 40 00 00:00:00.004 READ FPDMA QUEUED ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:00.004 IDENTIFY DEVICE b4 00 00 00 00 00 00 00 00 00 00 00 00 00:00:00.004 SANITIZE DEVICE ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:00.004 IDENTIFY DEVICE ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:00.004 IDENTIFY DEVICE Error 12189 [3] occurred at disk power-on lifetime: 1887 hours (78 days + 15 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 04 -- 51 00 01 00 00 00 c2 4f 00 00 00 Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- b0 00 d1 00 01 00 00 00 c2 4f 00 00 00 00:00:00.003 SMART READ ATTRIBUTE THRESHOLDS [OBS-4] b0 00 da 00 01 00 00 00 c2 4f 00 00 00 00:00:00.003 SMART RETURN STATUS b4 00 00 00 00 00 00 00 00 00 00 00 00 00:00:00.003 SANITIZE DEVICE b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 00:00:00.003 SMART READ DATA ec 00 00 00 01 00 00 00 00 00 00 00 00 00:00:00.003 IDENTIFY DEVICE SMART Extended Self-test Log Version: 1 (2 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 33/41 Celsius Lifetime Min/Max Temperature: 22/49 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 43 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/65 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 478 (457) Index Estimated Time Temperature Celsius 458 2017-07-10 11:35 34 *************** ... ..( 27 skipped). .. *************** 8 2017-07-10 12:03 34 *************** 9 2017-07-10 12:04 35 **************** 10 2017-07-10 12:05 34 *************** ... ..(149 skipped). .. *************** 160 2017-07-10 14:35 34 *************** 161 2017-07-10 14:36 35 **************** 162 2017-07-10 14:37 35 **************** 163 2017-07-10 14:38 34 *************** ... ..( 90 skipped). .. *************** 254 2017-07-10 16:09 34 *************** 255 2017-07-10 16:10 35 **************** ... ..( 62 skipped). .. **************** 318 2017-07-10 17:13 35 **************** 319 2017-07-10 17:14 34 *************** 320 2017-07-10 17:15 35 **************** ... ..( 4 skipped). .. **************** 325 2017-07-10 17:20 35 **************** 326 2017-07-10 17:21 34 *************** ... ..(130 skipped). .. *************** 457 2017-07-10 19:32 34 *************** SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 47 --- Lifetime Power-On Resets 0x01 0x010 4 3504 --- Power-on Hours 0x01 0x018 6 6000000 --- Logical Sectors Written 0x01 0x020 6 60268553612 --- Number of Write Commands 0x01 0x028 6 1042364 --- Logical Sectors Read 0x01 0x030 6 682988664340 --- Number of Read Commands 0x01 0x038 6 4024465408 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 85812 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 480 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 34 --- Current Temperature 0x05 0x010 1 34 --- Average Short Term Temperature 0x05 0x018 1 34 --- Average Long Term Temperature 0x05 0x020 1 49 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x030 1 48 --- Highest Average Short Term Temperature 0x05 0x038 1 21 --- Lowest Average Short Term Temperature 0x05 0x040 1 48 --- Highest Average Long Term Temperature 0x05 0x048 1 26 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 60 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 12490 --- Number of Hardware Resets 0x06 0x010 4 105 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 28 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x000a 2 796 Device-to-host register FISes sent due to a COMRESET 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS -bash-4.1#