smartctl 6.6 (build date Mar 28 2017) [x86_64-linux-3.13.0-39-generic] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: INTEL SSDSC2BA200G4R Add. Product Id: DELL(tm) Firmware Version: G201DL2B User Capacity: 200,049,647,616 bytes [200 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Mar 29 08:22:42 2017 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: ATA return descriptor not supported by controller firmware Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART Status not supported: ATA return descriptor not supported by controller firmware SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 60) minutes. Conveyance self-test routine recommended polling time: ( 60) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 273 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -OSR-- 130 130 039 - 37013334 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 9 Power_On_Hours -O--CK 100 100 000 - 6164 12 Power_Cycle_Count -O--CK 100 100 000 - 5300 13 Read_Soft_Error_Rate -OSRC- 130 100 000 - 8626947926 179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 17180 181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 100 100 000 - 25 195 Hardware_ECC_Recovered -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 201 Unknown_SSD_Attribute PO--CK 100 100 010 - 193273795554 202 Unknown_SSD_Attribute POS--K 100 100 000 - 0 226 Unknown_SSD_Attribute -O--CK 100 100 000 - 65535 227 Unknown_SSD_Attribute -O--CK 100 100 000 - 65535 228 Power-off_Retract_Count -O--CK 100 100 000 - 65535 233 Media_Wearout_Indicator -O--CK 100 100 000 - 1708023 245 Unknown_Attribute -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 GPL,SL R/O 1 Summary SMART error log 0x02 GPL,SL R/O 8 Comprehensive SMART error log 0x03 GPL,SL R/O 20 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 GPL,SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 2 Extended self-test log 0x08 GPL,SL R/O 2 Power Conditions log 0x09 GPL,SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb0 GPL,SL VS 1 Device vendor specific log 0xb1 GPL,SL VS 33 Device vendor specific log 0xb8 GPL,SL VS 1 Device vendor specific log 0xb9 GPL VS 1544 Device vendor specific log 0xb9 SL VS 8 Device vendor specific log 0xba GPL VS 1280 Device vendor specific log 0xdf GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (20 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 6164 - # 2 Short offline Completed without error 00% 6139 - # 3 Short offline Completed without error 00% 6123 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 58581440543067649 7205815500444532762 Not_testing 2 360287970189639780 7028244230665 Not_testing 3 7205814430997676032 360287970189644388 Not_testing 4 58581182140390925 7205816247768842266 Not_testing 5 360287970189639780 18890040939655860 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 0 Device State: Active (0) Current Temperature: 25 Celsius Power Cycle Min/Max Temperature: 19/31 Celsius Lifetime Min/Max Temperature: 19/31 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Write SCT Data Table failed: SMART WRITE LOG SECTOR may cause problems, try with -T permissive to force Read SCT Temperature History failed Write SCT (Get) Error Recovery Control Command failed: ATA return descriptor not supported by controller firmware SCT (Get) Error Recovery Control command failed Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 5300 --- Lifetime Power-On Resets 0x01 0x018 6 111937049168 --- Logical Sectors Written 0x01 0x020 6 1005510373 --- Number of Write Commands 0x01 0x028 6 485158753 --- Logical Sectors Read 0x01 0x030 6 161204 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 25 --- Current Temperature 0x05 0x010 1 24 --- Average Short Term Temperature 0x05 0x018 1 23 --- Average Long Term Temperature 0x05 0x020 1 31 --- Highest Temperature 0x05 0x028 1 20 --- Lowest Temperature 0x05 0x030 1 25 --- Highest Average Short Term Temperature 0x05 0x038 1 20 --- Lowest Average Short Term Temperature 0x05 0x040 1 23 --- Highest Average Long Term Temperature 0x05 0x048 1 20 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 0 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS