smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.9-100.fc24.x86_64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Samsung SSD 850 EVO 2TB Firmware Version: EMT02B6Q User Capacity: 2.000.398.934.016 bytes [2,00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Feb 14 14:49:46 2017 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 265) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 145 12 Power_Cycle_Count -O--CK 099 099 000 - 9 177 Wear_Leveling_Count PO--C- 099 099 000 - 1 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 060 050 000 - 40 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 3 241 Total_LBAs_Written -O--CK 099 099 000 - 4356547999 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 135 - # 2 Short offline Completed without error 00% 111 - # 3 Extended offline Completed without error 00% 111 - # 4 Short offline Completed without error 00% 87 - # 5 Extended offline Completed without error 00% 68 - # 6 Short offline Completed without error 00% 64 - # 7 Extended offline Completed without error 00% 14 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 31/50 Celsius Lifetime Min/Max Temperature: 31/50 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (122) Index Estimated Time Temperature Celsius 123 2017-02-13 17:30 40 ********************* ... ..( 10 skipped). .. ********************* 6 2017-02-13 19:20 40 ********************* 7 2017-02-13 19:30 41 ********************** 8 2017-02-13 19:40 41 ********************** 9 2017-02-13 19:50 45 ************************** 10 2017-02-13 20:00 47 **************************** 11 2017-02-13 20:10 46 *************************** 12 2017-02-13 20:20 46 *************************** 13 2017-02-13 20:30 46 *************************** 14 2017-02-13 20:40 42 *********************** 15 2017-02-13 20:50 41 ********************** 16 2017-02-13 21:00 41 ********************** 17 2017-02-13 21:10 40 ********************* ... ..( 23 skipped). .. ********************* 41 2017-02-14 01:10 40 ********************* 42 2017-02-14 01:20 39 ******************** ... ..( 12 skipped). .. ******************** 55 2017-02-14 03:30 39 ******************** 56 2017-02-14 03:40 40 ********************* 57 2017-02-14 03:50 40 ********************* 58 2017-02-14 04:00 40 ********************* 59 2017-02-14 04:10 39 ******************** ... ..( 5 skipped). .. ******************** 65 2017-02-14 05:10 39 ******************** 66 2017-02-14 05:20 40 ********************* 67 2017-02-14 05:30 39 ******************** ... ..( 6 skipped). .. ******************** 74 2017-02-14 06:40 39 ******************** 75 2017-02-14 06:50 40 ********************* 76 2017-02-14 07:00 40 ********************* 77 2017-02-14 07:10 39 ******************** ... ..( 17 skipped). .. ******************** 95 2017-02-14 10:10 39 ******************** 96 2017-02-14 10:20 40 ********************* ... ..( 10 skipped). .. ********************* 107 2017-02-14 12:10 40 ********************* 108 2017-02-14 12:20 38 ******************* 109 2017-02-14 12:30 36 ***************** 110 2017-02-14 12:40 34 *************** 111 2017-02-14 12:50 35 **************** 112 2017-02-14 13:00 37 ****************** 113 2017-02-14 13:10 39 ******************** 114 2017-02-14 13:20 39 ******************** 115 2017-02-14 13:30 40 ********************* ... ..( 6 skipped). .. ********************* 122 2017-02-14 14:40 40 ********************* SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 27 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 27 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC