################################################################################# # hwinfo --disk 47: IDE 00.0: 10600 Disk [Created at block.243] UDI: /org/freedesktop/Hal/devices/storage_serial_TOSHIBA_THNSNJ512GCST_Y3FSHIMOMNULL Unique ID: 3OxL.zfxCMx4fxg5 Parent ID: x7x8.45KnxGrxJ9x SysFS ID: /class/block/sda SysFS BusID: 0:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0 Hardware Class: disk Model: "TOSHIBA THNSNJ51" Vendor: "TOSHIBA" Device: "THNSNJ51" Revision: "JTRA" Serial ID: "Y3FSHIMOMNULL" Driver: "ahci", "sd" Driver Modules: "ahci" Device File: /dev/sda Device Files: /dev/sda, /dev/disk/by-id/ata-TOSHIBA_THNSNJ512GCST_Y3FSHIMOMNULL, /dev/disk/by-id/scsi-SATA_TOSHIBA_THNSNJ5_Y3FSHIMOMNULL, /dev/disk/by-id/wwn-0x500080diskydisk, /dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0 Device Number: block 8:0-8:15 BIOS id: 0x80 Geometry (Logical): CHS 62260/255/63 Size: 1000215216 sectors a 512 bytes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (SATA controller) ################################################################################# # hwinfo --storage-ctrl 29: PCI 1f.2: 0106 SATA controller (AHCI 1.0) [Created at pci.318] UDI: /org/freedesktop/Hal/devices/pci_8086_3b2f Unique ID: x7x8.45KnxGrxJ9x SysFS ID: /devices/pci0000:00/0000:00:1f.2 SysFS BusID: 0000:00:1f.2 Hardware Class: storage Model: "Intel Ibex Peak 6 port SATA AHCI Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x3b2f "Ibex Peak 6 port SATA AHCI Controller" SubVendor: pci 0x17aa "Lenovo" SubDevice: pci 0x2168 Revision: 0x06 Driver: "ahci" Driver Modules: "ahci" I/O Ports: 0x1818-0x181f (rw) I/O Ports: 0x180c-0x180f (rw) I/O Ports: 0x1810-0x1817 (rw) I/O Ports: 0x1808-0x180b (rw) I/O Ports: 0x1840-0x185f (rw) Memory Range: 0xf2627000-0xf26277ff (rw,non-prefetchable) IRQ: 53 (939404 events) Module Alias: "pci:v00008086d00003B2Fsv000017AAsd00002168bc01sc06i01" Driver Info #0: Driver Status: ahci is active Driver Activation Cmd: "modprobe ahci" Config Status: cfg=new, avail=yes, need=no, active=unknown ################################################################################# # smartctl -q noserial -x /dev/sda | tee /tmp/smartctl-TOSHIBA-THNSNJ512GCST.txt smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.13.0-92-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: TOSHIBA THNSNJ512GCST Firmware Version: JTRA0102 User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 9 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Tue Aug 2 13:59:16 2016 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 120) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 19) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O-R-- 100 100 000 - 0 2 Throughput_Performance P-S--- 100 100 050 - 0 3 Spin_Up_Time POS--- 100 100 050 - 0 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 7 Seek_Error_Rate PO-R-- 100 100 050 - 0 8 Seek_Time_Performance P-S--- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 16925 10 Spin_Retry_Count PO--C- 100 100 050 - 0 12 Power_Cycle_Count -O--C- 100 100 000 - 662 167 Unknown_Attribute -O---K 100 100 000 - 0 168 Unknown_Attribute -O--C- 100 100 000 - 213 169 Unknown_Attribute PO--C- 100 100 010 - 100 173 Unknown_Attribute -O--C- 190 190 000 - 0 175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 271 194 Temperature_Celsius PO---K 066 046 020 - 34 (Min/Max 12/54) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 240 Head_Flying_Hours PO--C- 100 100 050 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] GP/S Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x01 has 1 sectors [Summary SMART error log] SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log] GP Log at address 0x03 has 64 sectors [Ext. Comprehensive SMART error log] GP/S Log at address 0x04 has 8 sectors [Device Statistics] SMART Log at address 0x06 has 1 sectors [SMART self-test log] GP Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x09 has 1 sectors [Selective self-test log] GP Log at address 0x10 has 1 sectors [NCQ Command Error] GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] GP/S Log at address 0x30 has 9 sectors [Reserved] GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 213 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 213 [212] occurred at disk power-on lifetime: 119 hours (4 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 00 00 00 1a 8e c4 72 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x1a8ec472 = 445564018 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 1a 8e c4 72 e0 08 05:36:23.874 READ DMA EXT 25 00 00 01 00 00 00 1a 8e c3 72 e0 08 05:36:23.873 READ DMA EXT 25 00 00 01 00 00 00 1a 8e c2 72 e0 08 05:36:23.872 READ DMA EXT 25 00 00 01 00 00 00 1a 8e c1 72 e0 08 05:36:23.872 READ DMA EXT 25 00 00 01 00 00 00 1a 8e c0 72 e0 08 05:36:23.871 READ DMA EXT Error 212 [211] occurred at disk power-on lifetime: 119 hours (4 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 00 00 00 1a 54 ee 72 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x1a54ee72 = 441773682 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 1a 54 ee 72 e0 08 05:36:00.537 READ DMA EXT 25 00 00 01 00 00 00 1a 54 ed 72 e0 08 05:36:00.537 READ DMA EXT 25 00 00 01 00 00 00 1a 54 ec 72 e0 08 05:36:00.536 READ DMA EXT 25 00 00 01 00 00 00 1a 54 eb 72 e0 08 05:36:00.536 READ DMA EXT 25 00 00 01 00 00 00 1a 54 ea 72 e0 08 05:36:00.535 READ DMA EXT Error 211 [210] occurred at disk power-on lifetime: 119 hours (4 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 00 00 00 19 4d 73 72 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x194d7372 = 424506226 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 19 4d 73 72 e0 08 05:34:33.697 READ DMA EXT 25 00 00 01 00 00 00 19 4d 72 72 e0 08 05:34:33.696 READ DMA EXT 25 00 00 01 00 00 00 19 4d 71 72 e0 08 05:34:33.696 READ DMA EXT 25 00 00 01 00 00 00 19 4d 70 72 e0 08 05:34:33.695 READ DMA EXT 25 00 00 01 00 00 00 19 4d 6f 72 e0 08 05:34:33.694 READ DMA EXT Error 210 [209] occurred at disk power-on lifetime: 119 hours (4 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 02 00 00 00 19 29 ee 72 e0 08 Error: ICRC, ABRT 512 sectors at LBA = 0x1929ee72 = 422178418 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 02 00 00 00 19 29 ee 72 e0 08 05:15:58.020 READ DMA EXT 35 00 00 04 00 00 00 1b 6f 86 f2 e0 08 05:15:58.018 WRITE DMA EXT 35 00 00 04 00 00 00 1b 6f 82 f2 e0 08 05:15:58.015 WRITE DMA EXT 35 00 00 04 00 00 00 1b 6f 7e f2 e0 08 05:15:58.013 WRITE DMA EXT 35 00 00 04 00 00 00 1b 6f 7a f2 e0 08 05:15:58.011 WRITE DMA EXT Error 209 [208] occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 00 00 00 27 03 3b 80 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x27033b80 = 654523264 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 27 03 3b 80 e0 08 04:40:17.891 READ DMA EXT 25 00 00 01 00 00 00 27 03 3a 80 e0 08 04:40:17.890 READ DMA EXT 25 00 00 01 00 00 00 27 03 39 80 e0 08 04:40:17.889 READ DMA EXT 25 00 00 01 00 00 00 27 03 38 80 e0 08 04:40:17.888 READ DMA EXT 25 00 00 01 00 00 00 27 03 37 80 e0 08 04:40:17.887 READ DMA EXT Error 208 [207] occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 00 00 00 26 ca 74 80 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x26ca7480 = 650802304 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 26 ca 74 80 e0 08 04:38:51.810 READ DMA EXT 25 00 00 01 00 00 00 26 ca 73 80 e0 08 04:38:51.809 READ DMA EXT 25 00 00 01 00 00 00 26 ca 72 80 e0 08 04:38:51.808 READ DMA EXT 25 00 00 01 00 00 00 26 ca 71 80 e0 08 04:38:51.807 READ DMA EXT 25 00 00 01 00 00 00 26 ca 70 80 e0 08 04:38:51.806 READ DMA EXT Error 207 [206] occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 00 00 00 26 4a 84 80 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x264a8480 = 642417792 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 26 4a 84 80 e0 08 04:38:19.936 READ DMA EXT 25 00 00 01 00 00 00 26 4a 83 80 e0 08 04:38:19.935 READ DMA EXT 25 00 00 01 00 00 00 26 4a 82 80 e0 08 04:38:19.934 READ DMA EXT 25 00 00 01 00 00 00 26 4a 81 80 e0 08 04:38:19.933 READ DMA EXT 25 00 00 01 00 00 00 26 4a 80 80 e0 08 04:38:19.932 READ DMA EXT Error 206 [205] occurred at disk power-on lifetime: 118 hours (4 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 51 01 00 00 00 25 cb b7 00 e0 08 Error: ICRC, ABRT 256 sectors at LBA = 0x25cbb700 = 634107648 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 25 00 00 01 00 00 00 25 cb b7 00 e0 08 04:22:30.355 READ DMA EXT 25 00 00 01 00 00 00 25 cb b6 00 e0 08 04:22:30.348 READ DMA EXT 25 00 00 01 00 00 00 25 cb b5 00 e0 08 04:22:30.340 READ DMA EXT 25 00 00 01 00 00 00 25 cb b4 00 e0 08 04:22:30.332 READ DMA EXT 25 00 00 01 00 00 00 25 cb b3 00 e0 08 04:22:30.325 READ DMA EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 16925 - # 2 Short offline Completed without error 00% 855 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 3 (0x0003) SCT Support Level: 0 Device State: Active (0) Current Temperature: 34 Celsius Power Cycle Min/Max Temperature: 27/39 Celsius Lifetime Min/Max Temperature: 12/54 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 5/40 Celsius Min/Max Temperature Limit: 0/80 Celsius Temperature History Size (Index): 128 (100) Index Estimated Time Temperature Celsius 101 2016-08-02 11:52 39 ******************** 102 2016-08-02 11:53 38 ******************* 103 2016-08-02 11:54 37 ****************** 104 2016-08-02 11:55 37 ****************** 105 2016-08-02 11:56 36 ***************** 106 2016-08-02 11:57 36 ***************** 107 2016-08-02 11:58 35 **************** ... ..( 2 skipped). .. **************** 110 2016-08-02 12:01 35 **************** 111 2016-08-02 12:02 34 *************** ... ..( 7 skipped). .. *************** 119 2016-08-02 12:10 34 *************** 120 2016-08-02 12:11 33 ************** ... ..( 98 skipped). .. ************** 91 2016-08-02 13:50 33 ************** 92 2016-08-02 13:51 35 **************** 93 2016-08-02 13:52 37 ****************** 94 2016-08-02 13:53 36 ***************** 95 2016-08-02 13:54 35 **************** 96 2016-08-02 13:55 35 **************** 97 2016-08-02 13:56 34 *************** ... ..( 2 skipped). .. *************** 100 2016-08-02 13:59 34 *************** SCT Error Recovery Control: Read: 600 (60.0 seconds) Write: 600 (60.0 seconds) SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 4 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 4 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 9899 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 20 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC RUNNING GDLVM7