smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.1.2-gentoo] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: OCZ-VELO DRIVE Serial Number: OCZ-6739H792UI90LEKV LU WWN Device Id: 5 e83a97 f181d86f8 Firmware Version: 1.33 User Capacity: 75,025,391,616 bytes [75.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Tue Sep 1 22:00:17 2015 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 5) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 32540 (252 188 0) 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 56 13 Read_Soft_Error_Rate 0x000a 120 120 000 Old_age Always - 25671019528192 100 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 3264 170 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 13008 171 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 0 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 50 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0 181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 090 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 030 030 000 Old_age Always - 30 (Min/Max 30/30) 195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 0 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 198 Offline_Uncorrectable 0x0010 120 120 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 201 Unknown_SSD_Attribute 0x001c 120 120 000 Old_age Offline - 0 204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 0 230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 100 231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always - 0 232 Available_Reservd_Space 0x0000 000 000 000 Old_age Offline - 25 233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline - 6592 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 4224 235 Unknown_Attribute 0x0033 100 100 002 Pre-fail Always - 0 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 4224 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 11200 SMART Error Log not supported SMART Self-test Log not supported SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.