smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.4.3-gentoo] (local build) Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: CT250BX100SSD1 Firmware Version: MU02 User Capacity: 250,059,350,016 bytes [250 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Mar 14 11:12:33 2016 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters Wt Cache Reorder: Unknown (SCT Feature Control command failed) === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 100 100 000 - 0 5 Reallocated_Sector_Ct ------ 100 100 000 - 0 9 Power_On_Hours ------ 100 100 000 - 36 12 Power_Cycle_Count ------ 100 100 000 - 13 160 Unknown_Attribute ------ 100 100 000 - 0 161 Unknown_Attribute ------ 100 100 000 - 69 163 Unknown_Attribute ------ 100 100 000 - 22 164 Unknown_Attribute ------ 100 100 000 - 4816 165 Unknown_Attribute ------ 100 100 000 - 10 166 Unknown_Attribute ------ 100 100 000 - 1 167 Unknown_Attribute ------ 100 100 000 - 2 168 Unknown_Attribute ------ 100 100 000 - 2000 169 Unknown_Attribute ------ 100 100 000 - 100 175 Program_Fail_Count_Chip ------ 100 100 000 - 0 176 Erase_Fail_Count_Chip ------ 100 100 000 - 0 177 Wear_Leveling_Count ------ 100 100 000 - 0 178 Used_Rsvd_Blk_Cnt_Chip ------ 100 100 000 - 0 181 Program_Fail_Cnt_Total ------ 100 100 000 - 0 182 Erase_Fail_Count_Total ------ 100 100 000 - 0 192 Power-Off_Retract_Count ------ 100 100 000 - 2 194 Temperature_Celsius ------ 100 100 000 - 25 195 Hardware_ECC_Recovered ------ 100 100 000 - 28 196 Reallocated_Event_Count ------ 100 100 000 - 0 197 Current_Pending_Sector ------ 100 100 000 - 0 198 Offline_Uncorrectable ------ 100 100 000 - 0 199 UDMA_CRC_Error_Count ------ 100 100 000 - 0 232 Available_Reservd_Space ------ 100 100 000 - 100 241 Total_LBAs_Written ------ 100 100 000 - 28789 242 Total_LBAs_Read ------ 100 100 000 - 2997 245 Unknown_Attribute ------ 100 100 000 - 38528 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL,SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL,SL R/O 1 SATA NCQ Queued Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 64 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 0 Device State: Active (0) Current Temperature: 0 Celsius Power Cycle Min/Max Temperature: 22/25 Celsius Lifetime Min/Max Temperature: 0/31 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (35) Index Estimated Time Temperature Celsius 36 2016-03-14 09:05 24 ***** 37 2016-03-14 09:06 22 *** 38 2016-03-14 09:07 23 **** 39 2016-03-14 09:08 23 **** 40 2016-03-14 09:09 25 ****** 41 2016-03-14 09:10 25 ****** 42 2016-03-14 09:11 25 ****** 43 2016-03-14 09:12 26 ******* 44 2016-03-14 09:13 25 ****** 45 2016-03-14 09:14 22 *** 46 2016-03-14 09:15 22 *** 47 2016-03-14 09:16 23 **** 48 2016-03-14 09:17 24 ***** 49 2016-03-14 09:18 23 **** 50 2016-03-14 09:19 24 ***** ... ..( 20 skipped). .. ***** 71 2016-03-14 09:40 24 ***** 72 2016-03-14 09:41 25 ****** ... ..( 3 skipped). .. ****** 76 2016-03-14 09:45 25 ****** 77 2016-03-14 09:46 24 ***** 78 2016-03-14 09:47 24 ***** 79 2016-03-14 09:48 25 ****** ... ..( 6 skipped). .. ****** 86 2016-03-14 09:55 25 ****** 87 2016-03-14 09:56 23 **** 88 2016-03-14 09:57 23 **** 89 2016-03-14 09:58 24 ***** 90 2016-03-14 09:59 25 ****** ... ..( 9 skipped). .. ****** 100 2016-03-14 10:09 25 ****** 101 2016-03-14 10:10 22 *** 102 2016-03-14 10:11 23 **** 103 2016-03-14 10:12 23 **** 104 2016-03-14 10:13 25 ****** 105 2016-03-14 10:14 24 ***** ... ..( 3 skipped). .. ***** 109 2016-03-14 10:18 24 ***** 110 2016-03-14 10:19 25 ****** ... ..( 14 skipped). .. ****** 125 2016-03-14 10:34 25 ****** 126 2016-03-14 10:35 26 ******* 127 2016-03-14 10:36 25 ****** ... ..( 10 skipped). .. ****** 10 2016-03-14 10:47 25 ****** 11 2016-03-14 10:48 22 *** 12 2016-03-14 10:49 23 **** 13 2016-03-14 10:50 23 **** 14 2016-03-14 10:51 24 ***** ... ..( 2 skipped). .. ***** 17 2016-03-14 10:54 24 ***** 18 2016-03-14 10:55 25 ****** 19 2016-03-14 10:56 24 ***** 20 2016-03-14 10:57 24 ***** 21 2016-03-14 10:58 25 ****** ... ..( 12 skipped). .. ****** 34 2016-03-14 11:11 25 ****** 35 2016-03-14 11:12 24 ***** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 2) == 0x01 0x008 4 13 --- Lifetime Power-On Resets 0x01 0x010 4 36 --- Power-on Hours 0x01 0x018 6 1886756936 --- Logical Sectors Written 0x01 0x020 6 138629658 --- Number of Write Commands 0x01 0x028 6 196438985 --- Logical Sectors Read 0x01 0x030 6 6401850 --- Number of Read Commands 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 2 --- Resets Between Cmd Acceptance and Completion 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 207 --- Number of Hardware Resets 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC