smartctl 6.5 2016-01-23 r4210 [Darwin 12.6.0 x86_64] (daily-20160123) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Corsair CMFSSD-128D1 Serial Number: 84004582W73A67JPWCYN Firmware Version: 1.0 User Capacity: 128,035,676,160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA/ATAPI-7 (minor revision not indicated) Local Time is: Sun Jan 24 09:33:33 2016 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 240) Self-test routine in progress... 00% of test remaining. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x1d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 0) minutes. Extended self-test routine recommended polling time: ( 0) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate ------ 006 000 000 - 0 9 Power_On_Hours ------ 034 008 000 - 0 12 Power_Cycle_Count ------ 224 008 000 - 0 184 End-to-End_Error ------ 061 000 000 - 0 195 Hardware_ECC_Recovered ------ 003 000 000 - 0 196 Reallocated_Event_Count ------ 000 000 000 - 0 197 Current_Pending_Sector ------ 000 000 000 - 0 198 Offline_Uncorrectable ------ 072 108 000 - 23125 199 UDMA_CRC_Error_Count ------ 255 176 000 - 119578 200 Unknown_SSD_Attribute ------ 220 098 000 - 344 201 Unknown_SSD_Attribute ------ 056 082 000 - 937 202 Unknown_SSD_Attribute ------ 001 107 000 - 23 203 Run_Out_Cancel ------ 105 072 000 - 18 204 Soft_ECC_Correction ------ 000 000 000 - 0 205 Thermal_Asperity_Rate ------ 160 134 000 - 1 206 Unknown_SSD_Attribute ------ 001 000 000 - 0 207 Unknown_SSD_Attribute ------ 129 044 000 - 0 208 Unknown_SSD_Attribute ------ 156 002 000 - 0 209 Unknown_SSD_Attribute ------ 100 000 000 - 0 210 Unknown_Attribute ------ 238 000 000 - 0 211 Unknown_Attribute ------ 000 000 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented Read GP Log Directory failed SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 SL R/O 77 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 SL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 SL R/O 1 SATA NCQ Queued Error log 0x11 SL R/O 1 SATA Phy Event Counters log SMART Extended Comprehensive Error Log (GP Log 0x03) not supported Warning! SMART ATA Error Log Structure error: invalid SMART checksum. SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported Warning! SMART Self-Test Log Structure error: invalid SMART checksum. SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented Read SATA Phy Event Counters failed