smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.11-2-amd64] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === ATA IDENTIFY DATA === Word Bit Value Description 0 - 0x0040 General configuration 0 6 1 Not removable controller and/or device [OBS-6] 1 - 0x3fff Cylinders [OBS-6] 2 - 0xc837 Specific configuration (0x37c8/738c/8c73/c837) 3 - 0x0010 Heads [OBS-6] 6 - 0x003f Sectors per track [OBS-6] 10-19 - . Serial number (String) 10-13 . 0x5858:5858:5858:5858 "XXXXXXXX" 14-17 . 0x5858:5858:5858:5858 "XXXXXXXX" 18-19 . 0x5858:5858 "XXXX" 23-26 - . Firmware revision (String) 23-26 . 0x4443:3132:2020:2020 "DC12 " 27-46 - . Model number (String) 27-30 . 0x494e:5445:4c20:5353 "INTEL SS" 31-34 . 0x4453:4332:4257:3138 "DSC2BW18" 35-38 . 0x3041:3420:2020:2020 "0A4 " 39-42 . 0x2020:2020:2020:2020 " " 43-46 . 0x2020:2020:2020:2020 " " 47 - 0x8010 READ/WRITE MULTIPLE support 47 15:8 0x80 Must be set to 0x80 47 7:0 0x10 Maximum sectors per DRQ on READ/WRITE MULTIPLE 48 - 0x4000 Trusted Computing feature set options 48 15:14 0x1 Must be set to 0x1 49 - 0x2f00 Capabilities 49 13 1 Standard standby timer values supported 49 11 1 IORDY supported 49 10 1 IORDY may be disabled 49 9 1 LBA supported 49 8 1 DMA supported 50 - 0x4000 Capabilities 50 15:14 0x1 Must be set to 0x1 53 - 0x0007 Field validity / Free-fall Control 53 2 1 Word 88 (Ultra DMA modes) is valid 53 1 1 Words 64-70 (PIO modes) are valid 53 0 1 Words 54-58 (CHS) are valid [OBS-6] 54 - 0x3fff Current cylinders [OBS-6] 55 - 0x0010 Current heads [OBS-6] 56 - 0x003f Current sectors per track [OBS-6] 57-58 - . Current capacity in sectors (DWord) [OBS-6] 57-58 . 0xfc10:00fb (16514064) 59 - 0x0110 Sanitize Device - READ/WRITE MULTIPLE support 59 8 1 Bits 7:0 are valid 59 7:0 0x10 Current sectors per DRQ on READ/WRITE MULTIPLE 60-61 - . User addressable sectors for 28-bit commands (DWord) 60-61 . 0xffff:0fff (268435455) 63 - 0x0007 Multiword DMA modes 63 2 1 Multiword DMA mode 2 and below supported 63 1 1 Multiword DMA mode 1 and below supported 63 0 1 Multiword DMA mode 0 supported 64 - 0x0003 PIO modes 64 1 1 PIO mode 4 supported 64 0 1 PIO mode 3 supported 65 - 0x0078 Minimum Multiword DMA cycle time per word in ns 66 - 0x0078 Recommended Multiword DMA cycle time in ns 67 - 0x0078 Minimum PIO cycle time without flow control in ns 68 - 0x0078 Minimum PIO cycle time with IORDY flow control in ns 69 - 0x4010 Additional support 69 14 1 Deterministic data after trim supported 69 4 1 Device encrypts all user data 75 - 0x001f Queue depth 75 4:0 0x1f Maximum queue depth - 1 76 - 0x070e Serial ATA capabilities 76 10 1 Phy Event Counters supported 76 9 1 Receipt of host initiated PM requests supported 76 8 1 NCQ feature set supported 76 3 1 SATA Gen3 signaling speed (6.0 Gb/s) supported 76 2 1 SATA Gen2 signaling speed (3.0 Gb/s) supported 76 1 1 SATA Gen1 signaling speed (1.5 Gb/s) supported 77 - 0x0086 Serial ATA additional capabilities 77 15:7 0x001 Reserved for Serial ATA 77 3:1 0x3 Current Serial ATA signal speed 78 - 0x054c Serial ATA features supported 78 15:8 0x05 Reserved for Serial ATA 78 6 1 Software Settings Preservation supported 78 3 1 Device initiated power management supported 78 2 1 DMA Setup auto-activation supported 79 - 0x0044 Serial ATA features enabled 79 6 1 Software Settings Preservation enabled 79 2 1 DMA Setup auto-activation enabled 80 - 0x03fc Major version number 80 9 1 ACS-2 supported 80 8 1 ATA8-ACS supported 80 7 1 ATA/ATAPI-7 supported 80 6 1 ATA/ATAPI-6 supported 80 5 1 ATA/ATAPI-5 supported 80 4 1 ATA/ATAPI-4 supported [OBS-8] 80 3 1 ATA-3 supported [OBS-7] 80 2 1 ATA-2 supported [OBS-6] 82 - 0x746b Commands and feature sets supported 82 14 1 NOP supported 82 13 1 READ BUFFER supported 82 12 1 WRITE BUFFER supported 82 10 1 HPA feature set supported [OBS-ACS-3] 82 6 1 Read look-ahead supported 82 5 1 Volatile write cache supported 82 3 1 Power Management feature set supported 82 1 1 Security feature set supported 82 0 1 SMART feature set supported 83 - 0x7429 Commands and feature sets supported 83 15:14 0x1 Must be set to 0x1 83 13 1 FLUSH CACHE EXT supported 83 12 1 FLUSH CACHE supported 83 10 1 48-bit Address feature set supported 83 5 1 PUIS feature set supported 83 3 1 APM feature set supported 83 0 1 DOWNLOAD MICROCODE supported 84 - 0x6163 Commands and feature sets supported 84 15:14 0x1 Must be set to 0x1 84 13 1 IDLE IMMEDIATE with UNLOAD feature supported 84 8 1 64-bit World Wide Name supported 84 6 1 WRITE DMA/MULTIPLE FUA EXT supported 84 5 1 GPL feature set supported 84 1 1 SMART self-test supported 84 0 1 SMART error logging supported 85 - 0x7469 Commands and feature sets supported or enabled 85 14 1 NOP supported 85 13 1 READ BUFFER supported 85 12 1 WRITE BUFFER supported 85 10 1 HPA feature set supported [OBS-ACS-3] 85 6 1 Read look-ahead enabled 85 5 1 Write cache enabled 85 3 1 Power Management feature set supported 85 0 1 SMART feature set enabled 86 - 0xb409 Commands and feature sets supported or enabled 86 15 1 Words 119-120 are valid 86 13 1 FLUSH CACHE EXT supported 86 12 1 FLUSH CACHE supported 86 10 1 48-bit Address features set supported 86 3 1 APM feature set enabled 86 0 1 DOWNLOAD MICROCODE supported 87 - 0x6163 Commands and feature sets supported or enabled 87 15:14 0x1 Must be set to 0x1 87 13 1 IDLE IMMEDIATE with UNLOAD FEATURE supported 87 8 1 64-bit World Wide Name supported 87 6 1 WRITE DMA/MULTIPLE FUA EXT supported 87 5 1 GPL feature set supported 87 1 1 SMART self-test supported 87 0 1 SMART error logging supported 88 - 0x407f Ultra DMA modes 88 14 1 Ultra DMA mode 6 selected 88 6 1 Ultra DMA mode 6 and below supported 88 5 1 Ultra DMA mode 5 and below supported 88 4 1 Ultra DMA mode 4 and below supported 88 3 1 Ultra DMA mode 3 and below supported 88 2 1 Ultra DMA mode 2 and below supported 88 1 1 Ultra DMA mode 1 and below supported 88 0 1 Ultra DMA mode 0 supported 89 - 0x0002 SECURITY ERASE UNIT time 90 - 0x0001 ENHANCED SECURITY ERASE UNIT time 91 - 0x00fe Current APM level 92 - 0xfffe Master password revision code 100-103 - . User addressable sectors for 48-bit commands (QWord) 100-103 . 0xc830:14f5:0000:0000 (351651888) 105 - 0x0001 Max blocks of LBA Range Entries per DS MANAGEMENT cmd 106 - 0x4000 Physical sector size / logical sector size 106 15:14 0x1 Must be set to 0x1 119 - 0x401c Commands and feature sets supported 119 15:14 0x1 Must be set to 0x1 119 4 1 DOWNLOAD MICROCODE with mode 3 supported 119 3 1 READ/WRITE LOG DMA EXT supported 119 2 1 WRITE UNCORRECTABLE EXT supported 120 - 0x401c Commands and feature sets supported or enabled 120 15:14 0x1 Must be set to 0x1 120 4 1 DOWNLOAD MICROCODE with mode 3 supported 120 3 1 READ/WRITE LOG DMA EXT supported 120 2 1 WRITE UNCORRECTABLE EXT supported 128 - 0x0021 Security status 128 5 1 Enhanced security erase supported 128 0 1 Security supported 169 - 0x0001 Data Set Management support 169 0 1 Trim bit in DATA SET MANAGEMENT command supported 206 - 0x0025 SCT Command Transport 206 5 1 SCT Data Tables supported 206 2 1 SCT Write Same supported 206 0 1 SCT Command Transport supported 209 - 0x4000 Alignment of logical sectors 209 15:14 0x1 Must be set to 0x1 217 - 0x0001 Nominal media rotation rate 222 - 0x103f Transport major version number 222 15:12 0x1 Transport type: 0x0 = Parallel, 0x1 = Serial 222 5 1 Reserved | SATA 3.0 222 4 1 Reserved | SATA 2.6 222 3 1 Reserved | SATA 2.5 222 2 1 Reserved | SATA II: Extensions 222 1 1 ATA/ATAPI-7 | SATA 1.0a 222 0 1 ATA8-APT | ATA8-AST 234 - 0x0002 Minimum blocks per DOWNLOAD MICROCODE mode 3 command 235 - 0x0400 Maximum blocks per DOWNLOAD MICROCODE mode 3 command 255 - 0x01a5 Integrity word 255 15:8 0x01 Checksum 255 7:0 0xa5 Signature === START OF INFORMATION SECTION === Model Family: Intel 530 Series SSDs Device Model: INTEL SSDSC2BW180A4 Firmware Version: DC12 User Capacity: 180,045,766,656 bytes [180 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Dec 9 15:41:07 2013 EET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Unexpected SCT status 0x0010 (action_code=4, function_code=2) Wt Cache Reorder: N/A === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x05) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Disabled. Self-test execution status: ( 33) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: ( 4395) seconds. Offline data collection capabilities: (0x7f) SMART execute Offline immediate. Auto Offline data collection on/off support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 9 Power_On_Hours_and_Msec -O--CK 100 100 000 - 46h+56m+47.430s 12 Power_Cycle_Count -O--CK 100 100 000 - 4 170 Available_Reservd_Space PO--CK 100 100 010 - 0 171 Program_Fail_Count -O--CK 100 100 000 - 0 172 Erase_Fail_Count -O--CK 100 100 000 - 0 174 Unexpect_Power_Loss_Ct -O--CK 100 100 000 - 2 183 SATA_Downshift_Ct -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 090 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 035 044 000 - 35 (Min/Max 23/44) 192 Power-Off_Retract_Count -O--CK 100 100 000 - 2 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 225 Host_Writes_32MiB -O--CK 100 100 000 - 1351 226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 21 228 Timed_Workload_Timer -O--CK 100 100 000 - 65535 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 241 Host_Writes_32MiB -O--CK 100 100 000 - 1351 242 Host_Reads_32MiB -O--CK 100 100 000 - 375 249 NAND_Writes_1GiB -O--CK 100 100 000 - 136 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x04 GPL,SL R/O 1 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL,SL R/O 1 SATA Phy Event Counters 0x30 GPL,SL R/O 16 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xb7 GPL,SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log not supported SMART Extended Self-test Log Version: 0 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Interrupted (host reset) 10% 41 - # 2 Offline Interrupted (host reset) 10% 28 - # 3 Offline Interrupted (host reset) 10% 5 - # 4 Offline Interrupted (host reset) 10% 0 - SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Offline Interrupted (host reset) 10% 41 - # 2 Offline Interrupted (host reset) 10% 28 - # 3 Offline Interrupted (host reset) 10% 5 - # 4 Offline Interrupted (host reset) 10% 0 - SMART Selective self-test log data structure revision number 0 Note: revision number not 1 implies that no selective self-test has ever been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 0 (0x0000) SCT Support Level: 1 Device State: Active (0) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 23/44 Celsius Lifetime Min/Max Temperature: 23/67 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 0 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 0 (6) Temperature History is empty SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Description 1 ===== = = == General Statistics (rev 2) == 1 0x008 4 6 Lifetime Power-On Resets 1 0x010 4 55 Power-on Hours 1 0x018 6 288292409 Logical Sectors Written 1 0x028 6 218813206 Logical Sectors Read 4 ===== = = == General Errors Statistics (rev 1) == 4 0x008 4 0 Number of Reported Uncorrectable Errors 4 0x010 4 30 Resets Between Cmd Acceptance and Completion 5 ===== = = == Temperature Statistics (rev 1) == 5 0x008 1 35 Current Temperature 5 0x010 1 - Average Short Term Temperature 5 0x018 1 - Average Long Term Temperature 5 0x020 1 44 Highest Temperature 5 0x028 1 39 Lowest Temperature 5 0x030 1 - Highest Average Short Term Temperature 5 0x038 1 - Lowest Average Short Term Temperature 5 0x040 1 - Highest Average Long Term Temperature 5 0x048 1 - Lowest Average Long Term Temperature 5 0x050 4 0 Time in Over-Temperature 5 0x058 1 70 Specified Maximum Operating Temperature 5 0x060 4 0 Time in Under-Temperature 5 0x068 1 0 Specified Minimum Operating Temperature 6 ===== = = == Transport Statistics (rev 1) == 6 0x008 4 30 Number of Hardware Resets 6 0x010 4 1 Number of ASR Events 6 0x018 4 0 Number of Interface CRC Errors 7 ===== = = == Solid State Device Statistics (rev 1) == 7 0x008 1 0 Percentage Used Endurance Indicator SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC 0x0002 2 0 R_ERR response for data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS