stinker:~ chris$ smartctl -x /dev/disk0 smartctl 6.1 2013-03-16 r3800 [x86_64-apple-darwin12.3.0] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: APPLE HDD HTS547550A9E384 Serial Number: J2260056GRWJAC LU WWN Device Id: 5 000cca 715ca677f Firmware Version: JE3AD70F User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Jul 6 13:04:51 2013 MDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 128 (minimum power consumption without standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 132) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 177 177 033 - 1 4 Start_Stop_Count -O--C- 100 100 000 - 977 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 100 100 000 - 437 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 972 160 Unknown_Attribute -O--CK 100 100 000 - 0 191 G-Sense_Error_Rate -O-R-- 099 099 000 - 3 192 Power-Off_Retract_Count -O--CK 100 100 000 - 34359738376 193 Load_Cycle_Count -O--C- 098 098 000 - 27588 194 Temperature_Celsius -O---- 230 230 000 - 26 (Min/Max 17/43) 195 Hardware_ECC_Recovered -O-R-- 081 081 000 - 4718616 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 254 Free_Fall_Sensor -O--CK 100 100 000 - 85 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented Read GP Log Directory failed SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x09 SL R/W 1 Selective self-test log 0x80-0x9f SL R/W 16 Host vendor specific log 0xe0 SL R/W 1 SCT Command/Status 0xe1 SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 434 - # 2 Short offline Completed without error 00% 142 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 24/26 Celsius Lifetime Min/Max Temperature: 17/43 Celsius Lifetime Average Temperature: 29 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (41) Index Estimated Time Temperature Celsius 42 2013-07-06 10:57 30 *********** ... ..( 49 skipped). .. *********** 92 2013-07-06 11:47 30 *********** 93 2013-07-06 11:48 29 ********** 94 2013-07-06 11:49 30 *********** 95 2013-07-06 11:50 30 *********** 96 2013-07-06 11:51 29 ********** 97 2013-07-06 11:52 30 *********** 98 2013-07-06 11:53 29 ********** 99 2013-07-06 11:54 29 ********** 100 2013-07-06 11:55 30 *********** 101 2013-07-06 11:56 29 ********** 102 2013-07-06 11:57 29 ********** 103 2013-07-06 11:58 30 *********** 104 2013-07-06 11:59 30 *********** 105 2013-07-06 12:00 29 ********** 106 2013-07-06 12:01 30 *********** ... ..( 3 skipped). .. *********** 110 2013-07-06 12:05 30 *********** 111 2013-07-06 12:06 29 ********** 112 2013-07-06 12:07 30 *********** 113 2013-07-06 12:08 29 ********** ... ..( 3 skipped). .. ********** 117 2013-07-06 12:12 29 ********** 118 2013-07-06 12:13 30 *********** 119 2013-07-06 12:14 29 ********** ... ..( 3 skipped). .. ********** 123 2013-07-06 12:18 29 ********** 124 2013-07-06 12:19 30 *********** 125 2013-07-06 12:20 29 ********** 126 2013-07-06 12:21 29 ********** 127 2013-07-06 12:22 30 *********** 0 2013-07-06 12:23 30 *********** 1 2013-07-06 12:24 30 *********** 2 2013-07-06 12:25 29 ********** ... ..( 3 skipped). .. ********** 6 2013-07-06 12:29 29 ********** 7 2013-07-06 12:30 30 *********** 8 2013-07-06 12:31 29 ********** 9 2013-07-06 12:32 30 *********** 10 2013-07-06 12:33 30 *********** 11 2013-07-06 12:34 30 *********** 12 2013-07-06 12:35 29 ********** 13 2013-07-06 12:36 30 *********** ... ..( 7 skipped). .. *********** 21 2013-07-06 12:44 30 *********** 22 2013-07-06 12:45 29 ********** 23 2013-07-06 12:46 30 *********** ... ..( 2 skipped). .. *********** 26 2013-07-06 12:49 30 *********** 27 2013-07-06 12:50 31 ************ ... ..( 5 skipped). .. ************ 33 2013-07-06 12:56 31 ************ 34 2013-07-06 12:57 32 ************* ... ..( 3 skipped). .. ************* 38 2013-07-06 13:01 32 ************* 39 2013-07-06 13:02 ? - 40 2013-07-06 13:03 25 ****** 41 2013-07-06 13:04 26 ******* SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed Device Statistics (GP Log 0x04) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented Read SATA Phy Event Counters failed stinker:~ chris$