$ sudo smartctl -i /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-5.15.0-144-generic] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: MK000480GWCEV Serial Number: S3EBNX0K600403 LU WWN Device Id: 5 002538 c40aa834b Firmware Version: HPG3 User Capacity: 480,103,981,056 bytes [480 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database 7.3/5528 ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Aug 1 15:13:04 2025 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled $ sudo smartctl -A /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-5.15.0-144-generic] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 002 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 41963 173 Unknown_Attribute 0x0033 096 096 005 Pre-fail Always - 1464 175 Program_Fail_Count_Chip 0x0033 100 100 001 Pre-fail Always - 0 180 Unused_Rsvd_Blk_Cnt_Tot 0x003b 200 200 097 Pre-fail Always - 0 194 Temperature_Celsius 0x0022 084 074 000 Old_age Always - 16 196 Reallocated_Event_Count 0x0033 100 100 005 Pre-fail Always - 0 202 Unknown_SSD_Attribute 0x0033 100 100 010 Pre-fail Always - 0