smartctl 7.2 2020-12-30 r5155 [x86_64-linux-6.1.0-0.deb11.13-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi/HGST Travelstar Z5K500 Device Model: HGST HTS545050A7E680 Serial Number: TEA55D4N05DTWW LU WWN Device Id: 5 000cca 7adc275ea Firmware Version: GG2OAF10 User Capacity: 500,107,862,016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 6 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Feb 18 22:26:07 2024 +08 SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 45) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 107) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 2 Throughput_Performance P-S--- 100 100 040 - 0 3 Spin_Up_Time POS--- 253 253 033 - 1 4 Start_Stop_Count -O--C- 082 082 000 - 29107 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate PO-R-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 100 100 040 - 0 9 Power_On_Hours -O--C- 076 076 000 - 10597 10 Spin_Retry_Count PO--C- 100 100 060 - 0 12 Power_Cycle_Count -O--CK 099 099 000 - 2109 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 173 193 Load_Cycle_Count -O--C- 098 098 000 - 29125 194 Temperature_Celsius -O---- 153 153 000 - 39 (Min/Max 22/44) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O---K 100 100 000 - 0 198 Offline_Uncorrectable ---R-- 100 100 000 - 0 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 223 Load_Retry_Count -O-R-- 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10597 - # 2 Extended offline Completed without error 00% 10520 - # 3 Extended offline Aborted by host 90% 10518 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 39 Celsius Power Cycle Min/Max Temperature: 34/40 Celsius Lifetime Min/Max Temperature: 22/44 Celsius Specified Max Operating Temperature: 28 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/65 Celsius Temperature History Size (Index): 128 (52) Index Estimated Time Temperature Celsius 53 2024-02-18 20:19 35 **************** ... ..( 2 skipped). .. **************** 56 2024-02-18 20:22 35 **************** 57 2024-02-18 20:23 34 *************** 58 2024-02-18 20:24 34 *************** 59 2024-02-18 20:25 35 **************** 60 2024-02-18 20:26 35 **************** 61 2024-02-18 20:27 35 **************** 62 2024-02-18 20:28 34 *************** ... ..( 19 skipped). .. *************** 82 2024-02-18 20:48 34 *************** 83 2024-02-18 20:49 35 **************** ... ..( 9 skipped). .. **************** 93 2024-02-18 20:59 35 **************** 94 2024-02-18 21:00 34 *************** 95 2024-02-18 21:01 34 *************** 96 2024-02-18 21:02 35 **************** 97 2024-02-18 21:03 34 *************** ... ..( 8 skipped). .. *************** 106 2024-02-18 21:12 34 *************** 107 2024-02-18 21:13 35 **************** ... ..( 4 skipped). .. **************** 112 2024-02-18 21:18 35 **************** 113 2024-02-18 21:19 36 ***************** ... ..( 4 skipped). .. ***************** 118 2024-02-18 21:24 36 ***************** 119 2024-02-18 21:25 37 ****************** ... ..( 8 skipped). .. ****************** 0 2024-02-18 21:34 37 ****************** 1 2024-02-18 21:35 38 ******************* 2 2024-02-18 21:36 37 ****************** 3 2024-02-18 21:37 38 ******************* ... ..( 11 skipped). .. ******************* 15 2024-02-18 21:49 38 ******************* 16 2024-02-18 21:50 39 ******************** ... ..( 2 skipped). .. ******************** 19 2024-02-18 21:53 39 ******************** 20 2024-02-18 21:54 38 ******************* 21 2024-02-18 21:55 39 ******************** 22 2024-02-18 21:56 38 ******************* ... ..( 14 skipped). .. ******************* 37 2024-02-18 22:11 38 ******************* 38 2024-02-18 22:12 39 ******************** 39 2024-02-18 22:13 38 ******************* 40 2024-02-18 22:14 38 ******************* 41 2024-02-18 22:15 39 ******************** ... ..( 7 skipped). .. ******************** 49 2024-02-18 22:23 39 ******************** 50 2024-02-18 22:24 38 ******************* 51 2024-02-18 22:25 39 ******************** 52 2024-02-18 22:26 39 ******************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0009 2 10596 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 15 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS