C:\>smartctl -a /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-w64-mingw32-w11-22H2] (sf-7.4-1) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Swissbit X-8x Family SATA SSD Device Model: SFSA010GM1AO1TO-I-5S-11P-STD Serial Number: 000099005146EF000000 Firmware Version: AOR20008 User Capacity: 10'012'778'496 bytes [10.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available, deterministic, zeroed Device is: In smartctl database 7.3/5528 ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Apr 09 10:25:59 2024 MS SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 196 Total_Spare_Block_Cnt 0x0013 100 100 025 Pre-fail Always - 9026142746 213 Spare_Block_Cnt_Worst 0x0013 100 100 025 Pre-fail Always - 9026142746 229 Total_Flash_Block_Erases0x0012 100 100 001 Old_age Always - 0 248 Remaining_Life 0x0002 100 100 000 Old_age Always - 100 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x001a 100 100 000 Old_age Always - 0 169 Power_On_Data_Repairs 0x001a 100 100 000 Old_age Always - 0 195 Hardware_ECC_Recovered 0x0012 100 100 000 Old_age Always - 0 200 SATA_COM_Reset 0x0012 100 100 000 Old_age Always - 7 168 Rated_Erase_Count 0x0000 100 100 000 Old_age Offline - 20000 167 Average_Erase_Count 0x0012 100 100 000 Old_age Always - 0 165 Maximum_Erase_Count 0x0012 100 100 000 Old_age Always - 1 199 UDMA_CRC_Error_Count 0x001a 100 100 000 Old_age Always - 0 232 Total_Read_Cnt 0x0012 100 100 000 Old_age Always - 1980 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 8 241 Total_Host_LBA_Written 0x0012 100 100 000 Old_age Always - 0 242 Total_Host_LBA_Read 0x0012 100 100 000 Old_age Always - 0 215 Trim_Status 0x0002 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0002 028 035 000 Old_age Always - 28 (Min/Max 26/35) 184 End-to-End_Error 0x001a 100 100 000 Old_age Always - 0 185 E2E_ErrCnt_SATA-Flash 0x001a 100 100 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test Log not supported Selective Self-tests/Logging not supported The above only provides legacy SMART information - try 'smartctl -x' for more