$ smartctl -x -d sat /dev/sdb smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.5.9-200.fc38.x86_64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: TS512GESD310C Serial Number: REDACTED LU WWN Device Id: 0 000000 000000000 Firmware Version: W0629DM0 User Capacity: 512 110 190 080 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: Not in smartctl database 7.3/5533 ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, >6.0 Gb/s (4) Local Time is: Sun Nov 5 21:17:05 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unavailable Warning! SMART Attribute Data Structure error: invalid SMART checksum. Warning! SMART Attribute Thresholds Structure error: invalid SMART checksum. === START OF READ SMART DATA SECTION === SMART Status command failed: scsi error unsupported scsi opcode SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x00) Offline data collection not supported. SMART capabilities: (0x0000) Automatic saving of SMART data is not implemented. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O--CK 100 100 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 5 12 Power_Cycle_Count -O--CK 100 100 000 - 4 161 Unknown_Attribute ------ 100 100 000 - 100 169 Unknown_Attribute ------ 100 100 000 - 100 172 Unknown_Attribute -O--CK 100 100 000 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O---K 100 100 000 - 4 194 Temperature_Celsius -O--CK 041 041 000 - 41 (Min/Max 0/41) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 218 Unknown_Attribute ------ 100 100 000 - 0 231 Unknown_SSD_Attribute -O--CK 100 100 000 - 100 233 Media_Wearout_Indicator -O--CK 100 100 000 - 30954 241 Total_LBAs_Written -O--CK 100 100 000 - 15676 242 Total_LBAs_Read ------ 100 100 000 - 15577 244 Unknown_Attribute ------ 100 100 000 - 3 245 Unknown_Attribute ------ 100 100 000 - 8 246 Unknown_Attribute ------ 100 100 000 - 10093 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning Read SMART Log Directory failed: scsi error unsupported scsi opcode ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error unsupported scsi opcode Read GP Log Directory failed SMART Extended Comprehensive Error Log (GP Log 0x03) not supported Read SMART Error Log failed: scsi error unsupported scsi opcode SMART Extended Self-test Log (GP Log 0x07) not supported Read SMART Self-test Log failed: scsi error unsupported scsi opcode Selective Self-tests/Logging not supported SCT Commands not supported Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: scsi error unsupported scsi opcode Read SATA Phy Event Counters failed