smartctl 5.40 2010-10-16 r3189 [i686-w64-mingw32-2003(64)-sp2] (sf-win32-5.40-1) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net \\.\PhysicalDrive5: successfully opened REPORT-IOCTL: Device=/dev/sdf Command=IDENTIFY DEVICE Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN IOCTL_ATA_PASS_THROUGH failed, Error=1 Input : CMD=0xec, FR=0x00, SC=0x01, SN=0x00, CL=0x00, CH=0x00, SEL=0x00 SMART_GET_VERSION failed, Error=1 IOCTL_IDE_PASS_THROUGH failed, Error=1 Input : CMD=0xec, FR=0x00, SC=0x01, SN=0x00, CL=0x00, CH=0x00, SEL=0x00 IOCTL_STORAGE_QUERY_PROPERTY returns: Vendor: "AMCC " Product: "9650SE-4LPML" Revision: "4.10" Removable: No BusType: 0x08 REPORT-IOCTL: Device=/dev/sdf Command=IDENTIFY DEVICE returned 0 ===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== 000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2e 34 |...............4| 048-063: 30 31 00 00 00 00 4d 41 43 43 39 20 35 36 53 30 |01....MACC9 56S0| 064-079: 2d 45 4c 34 4d 50 00 4c 00 00 00 00 00 00 00 00 |-EL4MP.L........| 080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 160-175: 00 00 00 00 01 00 00 40 00 00 01 00 00 00 00 40 |.......@.......@| 176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| ===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== === START OF INFORMATION SECTION === Device Model: AMCC 9650SE-4LPML Serial Number: [No Information Found] Firmware Version: 4.10 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: [No Information Found] ATA Standard is: [No Information Found] Local Time is: Fri May 27 13:15:43 2011 CDT SMART support is: Available - device has SMART capability. Enabled status cached by OS, trying SMART RETURN STATUS cmd. REPORT-IOCTL: Device=/dev/sdf Command=SMART STATUS Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IOCTL_ATA_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xda, SC=0x00, SN=0x00, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_IDE_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xda, SC=0x00, SN=0x00, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_STORAGE_PREDICT_FAILURE returns: PredictFailure: 0x00000000 VendorSpecific: 0x0a,0x00,0x01,...,0x23 Output: ERR=...., SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., STS=.... REPORT-IOCTL: Device=/dev/sdf Command=SMART STATUS returned 0 SMART support is: Enabled REPORT-IOCTL: Device=/dev/sdf Command=SMART READ ATTRIBUTE VALUES Input: FR=0xd0, SC=0x01, LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN IOCTL_ATA_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xd0, SC=0x01, SN=0x00, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_IDE_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xd0, SC=0x01, SN=0x00, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_STORAGE_PREDICT_FAILURE returns: PredictFailure: 0x00000000 VendorSpecific: 0x0a,0x00,0x01,...,0x9d REPORT-IOCTL: Device=/dev/sdf Command=SMART READ ATTRIBUTE VALUES returned 0 ===== [SMART READ ATTRIBUTE VALUES] DATA START (BASE-16) ===== 000-015: 0a 00 01 0f 00 77 63 8f 68 fd 0c 00 00 00 03 03 |.....wc.hý......| 016-031: 00 64 64 00 00 00 00 00 00 00 04 32 00 64 64 49 |.dd........2.ddI| 032-047: 00 00 00 00 00 00 05 33 00 64 64 00 00 00 00 00 |.......3.dd.....| 048-063: 00 00 07 0f 00 3e 3c 92 f7 1b 00 00 00 00 09 32 |.....><’÷..... 2| 064-079: 00 62 62 e8 07 00 00 00 00 00 0a 13 00 64 64 00 |.bbè.........dd.| 080-095: 00 00 00 00 00 00 0c 32 00 64 64 48 00 00 00 00 |.......2.ddH....| 096-111: 00 00 b7 32 00 64 64 00 00 00 00 00 00 00 b8 32 |..·2.dd.......¸2| 112-127: 00 64 64 00 00 00 00 00 00 00 bb 32 00 64 64 00 |.dd.......»2.dd.| 128-143: 00 00 00 00 00 00 bc 32 00 64 64 00 00 00 00 00 |......¼2.dd.....| 144-159: 00 00 bd 3a 00 62 62 02 00 00 00 00 00 00 be 22 |..½:.bb.......¾"| 160-175: 00 44 3d 20 00 1a 25 00 00 00 c2 22 00 20 28 20 |.D= ..%...Â". ( | 176-191: 00 00 00 11 00 00 c3 1a 00 2f 0f 8f 68 fd 0c 00 |......Ã../..hý..| 192-207: 00 00 c5 12 00 64 64 00 00 00 00 00 00 00 c6 10 |..Å..dd.......Æ.| 208-223: 00 64 64 00 00 00 00 00 00 00 c7 3e 00 c8 c8 00 |.dd.......Ç>.ÈÈ.| 224-239: 00 00 00 00 00 00 f0 00 00 64 fd 68 05 00 00 c1 |......ð..dýh...Á| 240-255: d1 11 f1 00 00 64 fd 80 6a 98 72 00 00 00 f2 00 |Ñ.ñ..dý.j.r...ò.| 256-271: 00 64 fd 6c 7e 60 34 00 00 00 00 00 00 00 00 00 |.dýl~`4.........| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 79 02 00 73 |............y..s| 368-383: 03 00 01 00 01 ff 02 ca 01 00 00 00 00 00 00 00 |.....ÿ.Ê........| 384-399: 00 00 00 00 9f 0d 00 00 00 00 00 00 00 00 00 00 |....Ÿ...........| 400-415: 00 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 7e 49 dd 38 bf 06 00 00 |........~IÝ8¿...| 432-447: 00 00 00 00 01 00 2d 0f 80 6a 98 72 2e 01 00 00 |......-..j.r....| 448-463: 6c 7e 60 34 30 00 00 00 00 00 00 00 9a e2 3c 01 |l~`40.......šâ<.| 464-479: 00 00 00 00 00 00 00 00 5e 25 00 00 50 00 23 00 |........^%..P.#.| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2e |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 9d |................| ===== [SMART READ ATTRIBUTE VALUES] DATA END (512 Bytes) ===== REPORT-IOCTL: Device=/dev/sdf Command=SMART READ ATTRIBUTE THRESHOLDS Input: FR=0xd1, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN IOCTL_ATA_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xd1, SC=0x01, SN=0x01, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_IDE_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xd1, SC=0x01, SN=0x01, CL=0x4f, CH=0xc2, SEL=0x00 REPORT-IOCTL: Device=/dev/sdf Command=SMART READ ATTRIBUTE THRESHOLDS returned -1 errno=40 [Function not implemented] ===== [SMART READ ATTRIBUTE THRESHOLDS] DATA START (BASE-16) ===== 000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| ===== [SMART READ ATTRIBUTE THRESHOLDS] DATA END (512 Bytes) ===== Error SMART Thresholds Read failed: Function not implemented Smartctl: SMART Read Thresholds failed. === START OF READ SMART DATA SECTION === REPORT-IOCTL: Device=/dev/sdf Command=SMART STATUS CHECK Input: FR=0xda, SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IOCTL_ATA_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xda, SC=0x00, SN=0x00, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_IDE_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xda, SC=0x00, SN=0x00, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_STORAGE_PREDICT_FAILURE returns: PredictFailure: 0x00000000 VendorSpecific: 0x0a,0x00,0x01,...,0x18 Output: ERR=...., SC=...., LL=...., LM=0x4f, LH=0xc2, DEV=...., STS=.... REPORT-IOCTL: Device=/dev/sdf Command=SMART STATUS CHECK returned 0 errno=40 [Function not implemented] SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 633) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 255) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 119 099 --- Pre-fail Always - 217933967 3 Spin_Up_Time 0x0003 100 100 --- Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 --- Old_age Always - 73 5 Reallocated_Sector_Ct 0x0033 100 100 --- Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 062 060 --- Pre-fail Always - 1832850 9 Power_On_Hours 0x0032 098 098 --- Old_age Always - 2024 10 Spin_Retry_Count 0x0013 100 100 --- Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 --- Old_age Always - 72 183 Runtime_Bad_Block 0x0032 100 100 --- Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 --- Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 --- Old_age Always - 0 188 Command_Timeout 0x0032 100 100 --- Old_age Always - 0 189 High_Fly_Writes 0x003a 098 098 --- Old_age Always - 2 190 Airflow_Temperature_Cel 0x0022 068 061 --- Old_age Always - 32 (Min/Max 26/37) 194 Temperature_Celsius 0x0022 032 040 --- Old_age Always - 32 (0 17 0 0) 195 Hardware_ECC_Recovered 0x001a 047 015 --- Old_age Always - 217933967 197 Current_Pending_Sector 0x0012 100 100 --- Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 --- Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 --- Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 --- Old_age Offline - 230626858894696 241 Total_LBAs_Written 0x0000 100 253 --- Old_age Offline - 1922591360 242 Total_LBAs_Read 0x0000 100 253 --- Old_age Offline - 878739052 REPORT-IOCTL: Device=/dev/sdf Command=SMART READ LOG InputParameter=1 Input: FR=0xd5, SC=0x01, LL=0x01, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN IOCTL_ATA_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xd5, SC=0x01, SN=0x01, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_IDE_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xd5, SC=0x01, SN=0x01, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_SCSI_MINIPORT_READ_SMART_LOG failed, Error=1 Input : CMD=0xb0, FR=0xd5, SC=0x01, SN=0x01, CL=0x4f, CH=0xc2, SEL=0x00 REPORT-IOCTL: Device=/dev/sdf Command=SMART READ LOG returned -1 errno=40 [Function not implemented] ===== [SMART READ LOG] DATA START (BASE-16) ===== 000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| ===== [SMART READ LOG] DATA END (512 Bytes) ===== Error SMART Error Log Read failed: Function not implemented Smartctl: SMART Error Log Read Failed REPORT-IOCTL: Device=/dev/sdf Command=SMART READ LOG InputParameter=6 Input: FR=0xd5, SC=0x01, LL=0x06, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN IOCTL_ATA_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xd5, SC=0x01, SN=0x06, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_IDE_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xd5, SC=0x01, SN=0x06, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_SCSI_MINIPORT_READ_SMART_LOG failed, Error=1 Input : CMD=0xb0, FR=0xd5, SC=0x01, SN=0x06, CL=0x4f, CH=0xc2, SEL=0x00 REPORT-IOCTL: Device=/dev/sdf Command=SMART READ LOG returned -1 errno=40 [Function not implemented] ===== [SMART READ LOG] DATA START (BASE-16) ===== 000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| ===== [SMART READ LOG] DATA END (512 Bytes) ===== Error SMART Error Self-Test Log Read failed: Function not implemented Smartctl: SMART Self Test Log Read Failed REPORT-IOCTL: Device=/dev/sdf Command=SMART READ LOG InputParameter=9 Input: FR=0xd5, SC=0x01, LL=0x09, LM=0x4f, LH=0xc2, DEV=...., CMD=0xb0 IN IOCTL_ATA_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xd5, SC=0x01, SN=0x09, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_IDE_PASS_THROUGH failed, Error=1 Input : CMD=0xb0, FR=0xd5, SC=0x01, SN=0x09, CL=0x4f, CH=0xc2, SEL=0x00 IOCTL_SCSI_MINIPORT_READ_SMART_LOG failed, Error=1 Input : CMD=0xb0, FR=0xd5, SC=0x01, SN=0x09, CL=0x4f, CH=0xc2, SEL=0x00 REPORT-IOCTL: Device=/dev/sdf Command=SMART READ LOG returned -1 errno=40 [Function not implemented] ===== [SMART READ LOG] DATA START (BASE-16) ===== 000-015: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 016-031: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 032-047: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 048-063: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 064-079: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 080-095: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 096-111: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 112-127: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 128-143: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 144-159: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 160-175: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 176-191: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 192-207: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 208-223: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 240-255: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 256-271: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 416-431: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| ===== [SMART READ LOG] DATA END (512 Bytes) ===== Error SMART Read Selective Self-Test Log failed: Function not implemented Smartctl: SMART Selective Self Test Log Read Failed