smartctl 5.40 2010-10-16 r3189 [FreeBSD 8.2-RELEASE amd64] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: INTEL SSDSC2MH120A2 Serial Number: LNEL111501CW120CGN Firmware Version: PPG2 User Capacity: 120,034,123,776 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 2d Local Time is: Thu May 5 12:24:31 2011 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 10) seconds. Offline data collection capabilities: (0x15) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0020 100 100 000 Old_age Offline - 0 4 Start_Stop_Count 0x0030 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 45 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 31 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 14 225 Load_Cycle_Count 0x0030 100 100 000 Old_age Offline - 8391 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0 General Purpose Logging (GPL) feature set supported ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not supported Read GP Log Directory failed. SMART Log Directory Version 0 SMART Log at address 0x00 has 1 sectors [Log Directory] SMART Log at address 0x02 has 2 sectors [Comprehensive SMART error log] SMART Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] SMART Log at address 0x06 has 1 sectors [SMART self-test log] SMART Log at address 0x07 has 1 sectors [Extended self-test log] SMART Log at address 0x10 has 1 sectors [NCQ Command Error] SMART Log at address 0x11 has 1 sectors [SATA Phy Event Counters] SMART Log at address 0x80 has 1 sectors [Host vendor specific log] SMART Log at address 0x81 has 1 sectors [Host vendor specific log] SMART Log at address 0x82 has 1 sectors [Host vendor specific log] SMART Log at address 0x83 has 1 sectors [Host vendor specific log] SMART Log at address 0x84 has 1 sectors [Host vendor specific log] SMART Log at address 0x85 has 1 sectors [Host vendor specific log] SMART Log at address 0x86 has 1 sectors [Host vendor specific log] SMART Log at address 0x87 has 1 sectors [Host vendor specific log] SMART Log at address 0x88 has 1 sectors [Host vendor specific log] SMART Log at address 0x89 has 1 sectors [Host vendor specific log] SMART Log at address 0x8a has 1 sectors [Host vendor specific log] SMART Log at address 0x8b has 1 sectors [Host vendor specific log] SMART Log at address 0x8c has 1 sectors [Host vendor specific log] SMART Log at address 0x8d has 1 sectors [Host vendor specific log] SMART Log at address 0x8e has 1 sectors [Host vendor specific log] SMART Log at address 0x8f has 1 sectors [Host vendor specific log] SMART Log at address 0x90 has 1 sectors [Host vendor specific log] SMART Log at address 0x91 has 1 sectors [Host vendor specific log] SMART Log at address 0x92 has 1 sectors [Host vendor specific log] SMART Log at address 0x93 has 1 sectors [Host vendor specific log] SMART Log at address 0x94 has 1 sectors [Host vendor specific log] SMART Log at address 0x95 has 1 sectors [Host vendor specific log] SMART Log at address 0x96 has 1 sectors [Host vendor specific log] SMART Log at address 0x97 has 1 sectors [Host vendor specific log] SMART Log at address 0x98 has 1 sectors [Host vendor specific log] SMART Log at address 0x99 has 1 sectors [Host vendor specific log] SMART Log at address 0x9a has 1 sectors [Host vendor specific log] SMART Log at address 0x9b has 1 sectors [Host vendor specific log] SMART Log at address 0x9c has 1 sectors [Host vendor specific log] SMART Log at address 0x9d has 1 sectors [Host vendor specific log] SMART Log at address 0x9e has 1 sectors [Host vendor specific log] SMART Log at address 0x9f has 1 sectors [Host vendor specific log] SMART Log at address 0xa9 has 1 sectors [Device vendor specific log] SMART Log at address 0xe0 has 1 sectors [SCT Command/Status] SMART Log at address 0xe1 has 1 sectors [SCT Data Transfer] SMART Extended Comprehensive Error Log (GP Log 0x03) not supported Error SMART Error Log Read failed: Input/output error Smartctl: SMART Error Log Read Failed SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 1 Device State: Active (0) Current Temperature: ? Celsius Power Cycle Min/Max Temperature: ?/ ? Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 0 minutes Temperature Logging Interval: 0 minutes Min/Max recommended Temperature: ?/ ? Celsius Min/Max Temperature Limit: ?/ ? Celsius Temperature History Size (Index): 128 (0) Index Estimated Time Temperature Celsius 1 2011-05-05 10:17 ? - ... ..(126 skipped). .. - 0 2011-05-05 12:24 ? - SCT Error Recovery Control: Read: 57345 (5734.5 seconds) Write: 57345 (5734.5 seconds) SATA Phy Event Counters (GP Log 0x11) not supported