smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.15.74-1-pve] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SSDPR-CX400-128-G2 Serial Number: GY2015459 LU WWN Device Id: 5 000000 0000029de Firmware Version: SN07373 User Capacity: 128 035 676 160 bytes [128 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Jan 31 12:22:22 2023 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 33) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 20 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0 9 Power_On_Hours -O--C- 100 100 000 - 10156 12 Power_Cycle_Count -O--C- 100 100 000 - 14 167 Unknown_Attribute -O---K 100 100 000 - 0 168 Unknown_Attribute -O--C- 100 100 000 - 0 169 Unknown_Attribute PO--C- 100 100 010 - 0 171 Unknown_Attribute -O--CK 000 000 000 - 0 172 Unknown_Attribute -O--CK 000 000 000 - 0 173 Unknown_Attribute -O--C- 200 200 000 - 14783588602381 174 Unknown_Attribute -O---K 100 100 000 - 0 175 Program_Fail_Count_Chip -O---K 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 100 100 000 - 36 187 Reported_Uncorrect -O--CK 100 000 000 - 0 192 Power-Off_Retract_Count -O--C- 100 100 000 - 14 194 Temperature_Celsius -O---K 040 040 000 - 40 (Min/Max 10/50) 206 Unknown_SSD_Attribute -O--CK 200 200 000 - 3442 207 Unknown_SSD_Attribute -O--CK 200 200 000 - 4748 208 Unknown_SSD_Attribute -O--CK 200 200 000 - 4621 209 Unknown_SSD_Attribute -O--CK 200 200 000 - 1 210 Unknown_Attribute -O--CK 200 200 000 - 15335 211 Unknown_Attribute -O--CK 200 200 000 - 11992 231 Unknown_SSD_Attribute PO---K 010 010 005 - 92 241 Total_LBAs_Written -O--CK 100 100 000 - 120561 242 Total_LBAs_Read -O--CK 100 100 000 - 1365 243 Unknown_Attribute -O--CK 050 050 000 - 8587640796 245 Unknown_Attribute -O--CK 100 100 000 - 26 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 51 Comprehensive SMART error log 0x03 GPL R/O 64 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (64 sectors) Device Error Count: 1 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 [0] occurred at disk power-on lifetime: 9028 hours (376 days + 4 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 84 -- 41 00 08 00 00 01 47 66 40 40 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- ea 00 00 00 00 00 00 00 00 00 00 00 80 06:46:01.808 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 00 80 06:46:01.808 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 00 80 06:46:01.808 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 00 80 06:46:01.708 FLUSH CACHE EXT ea 00 00 00 00 00 00 00 00 00 00 00 80 06:46:01.708 FLUSH CACHE EXT SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 10156 - # 2 Short offline Completed without error 00% 10125 - # 3 Short offline Completed without error 00% 10103 - # 4 Short offline Completed without error 00% 10080 - # 5 Extended offline Completed without error 00% 10079 - # 6 Short offline Completed without error 00% 10058 - # 7 Short offline Completed without error 00% 10036 - # 8 Short offline Completed without error 00% 10013 - # 9 Short offline Completed without error 00% 9991 - #10 Short offline Completed without error 00% 9969 - #11 Short offline Completed without error 00% 9947 - #12 Short offline Completed without error 00% 9925 - #13 Extended offline Completed without error 00% 9924 - #14 Short offline Completed without error 00% 9903 - #15 Short offline Completed without error 00% 9881 - #16 Short offline Completed without error 00% 9859 - #17 Short offline Completed without error 00% 9836 - #18 Short offline Completed without error 00% 9814 - #19 Short offline Completed without error 00% 9792 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: ?/40 Celsius Lifetime Min/Max Temperature: ?/ ? Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: -127/127 Celsius Min/Max Temperature Limit: -127/127 Celsius Temperature History Size (Index): 478 (85) Index Estimated Time Temperature Celsius 86 2023-01-31 04:25 40 ********************* ... ..(476 skipped). .. ********************* 85 2023-01-31 12:22 40 ********************* SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 14 --- Lifetime Power-On Resets 0x01 0x010 4 10156 --- Power-on Hours 0x01 0x018 6 252836733976 --- Logical Sectors Written 0x01 0x020 6 4407726815 --- Number of Write Commands 0x01 0x028 6 2863129624 --- Logical Sectors Read 0x01 0x030 6 114107444 --- Number of Read Commands 0x01 0x038 6 8239873220456 --- Date and Time TimeStamp 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 189 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 1 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 4 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 4 43 Device-to-host register FISes sent due to a COMRESET 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC