smartctl 7.1 2020-04-05 r5049 [x86_64-linux-5.15.8-1.el8.elrepo.x86_64] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Ultrastar DC HC550 Device Model: WUH721818ALE6L4 Serial Number: 5DG7W4MJ LU WWN Device Id: 5 000cca 2b9c39483 Add. Product Id: 202211 Firmware Version: PCGAW660 User Capacity: 18,000,207,937,536 bytes [18.0 TB] Sector Size: 4096 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-4 published, ANSI INCITS 529-2018 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Oct 11 16:42:02 2022 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 101) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1927) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 082 082 001 Pre-fail Always - 358 (Average 359) 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 13 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 26 10 Spin_Retry_Count 0x0013 100 100 001 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10 22 Helium_Level 0x0023 100 100 025 Pre-fail Always - 100 82 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 255 184 End-to-End_Error 0x0033 100 100 097 Pre-fail Always - 0 188 Command_Timeout 0x0032 096 096 000 Old_age Always - 4 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 20 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 20 194 Temperature_Celsius 0x0002 064 064 000 Old_age Always - 31 (Min/Max 23/47) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 1 241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 258361234 242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 16261 SMART Error Log Version: 1 ATA Error Count: 1 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 1 occurred at disk power-on lifetime: 8 hours (0 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 43 00 00 00 00 00 Error: ICRC, ABRT at LBA = 0x00000000 = 0 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 60 00 00 00 40 08 00:01:39.962 READ FPDMA QUEUED ec 00 01 00 00 00 00 08 00:01:34.025 IDENTIFY DEVICE ec 00 01 00 00 00 00 08 00:01:34.025 IDENTIFY DEVICE 2f 00 01 2f 00 00 e0 08 00:01:18.152 READ LOG EXT 2f 00 01 00 00 00 e0 08 00:01:18.152 READ LOG EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.