smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win10(64)] (sf-6.5-1) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD10JPCX-24UE4T0 Serial Number: WD-WXA1E941HYZJ LU WWN Device Id: 5 0014ee 65aa9b931 Firmware Version: 01.01A01 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu May 19 00:22:07 2022 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (18960) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 212) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 182 179 021 Pre-fail Always - 1900 4 Start_Stop_Count 0x0032 001 001 000 Old_age Always - 121941 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 054 054 000 Old_age Always - 33788 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2230 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 75 193 Load_Cycle_Count 0x0032 095 095 000 Old_age Always - 316619 194 Temperature_Celsius 0x0022 118 093 000 Old_age Always - 29 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 240 Head_Flying_Hours 0x0032 077 077 000 Old_age Always - 17025 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 29 Celsius Power Cycle Min/Max Temperature: 28/29 Celsius Lifetime Min/Max Temperature: 18/54 Celsius Lifetime Average Temperature: 31 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 128 (76) Index Estimated Time Temperature Celsius 77 2022-05-18 22:15 34 *************** ... ..( 70 skipped). .. *************** 20 2022-05-18 23:26 34 *************** 21 2022-05-18 23:27 ? - 22 2022-05-18 23:28 34 *************** ... ..( 16 skipped). .. *************** 39 2022-05-18 23:45 34 *************** 40 2022-05-18 23:46 ? - 41 2022-05-18 23:47 34 *************** 42 2022-05-18 23:48 ? - 43 2022-05-18 23:49 29 ********** 44 2022-05-18 23:50 30 *********** 45 2022-05-18 23:51 30 *********** 46 2022-05-18 23:52 30 *********** 47 2022-05-18 23:53 31 ************ ... ..( 6 skipped). .. ************ 54 2022-05-19 00:00 31 ************ 55 2022-05-19 00:01 32 ************* 56 2022-05-19 00:02 ? - 57 2022-05-19 00:03 32 ************* ... ..( 2 skipped). .. ************* 60 2022-05-19 00:06 32 ************* 61 2022-05-19 00:07 33 ************** ... ..( 4 skipped). .. ************** 66 2022-05-19 00:12 33 ************** 67 2022-05-19 00:13 ? - 68 2022-05-19 00:14 33 ************** 69 2022-05-19 00:15 ? - 70 2022-05-19 00:16 28 ********* 71 2022-05-19 00:17 28 ********* 72 2022-05-19 00:18 28 ********* 73 2022-05-19 00:19 29 ********** 74 2022-05-19 00:20 29 ********** 75 2022-05-19 00:21 ? - 76 2022-05-19 00:22 29 **********