Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 402 minutes for test to complete. Test will complete after Thu Sep 16 14:00:42 2021 RDT Use smartctl -X to abort test. Test running: status = 249, 90% remaining Checking again in 40.2 minutes (i.e. at 07:58) Test running: status = 249, 90% remaining Checking again in 40.2 minutes (i.e. at 08:39) Test running: status = 248, 80% remaining Checking again in 40.2 minutes (i.e. at 09:19) Test running: status = 247, 70% remaining Checking again in 40.2 minutes (i.e. at 09:59) Test running: status = 246, 60% remaining Checking again in 40.2 minutes (i.e. at 10:39) Test running: status = 245, 50% remaining Checking again in 40.2 minutes (i.e. at 11:19) Test running: status = 244, 40% remaining Checking again in 40.2 minutes (i.e. at 12:00) Test running: status = 243, 30% remaining Checking again in 40.2 minutes (i.e. at 12:40) Test running: status = 242, 20% remaining Checking again in 40.2 minutes (i.e. at 13:20) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 14:00) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 14:40) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 15:21) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 16:01) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 16:41) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 17:21) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 18:01) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 18:42) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 19:22) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 20:02) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 20:42) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 21:23) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 22:03) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 22:43) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 23:23) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 00:03) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 00:44) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 01:24) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 02:04) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 02:44) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 03:24) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 04:05) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 04:45) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 05:25) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 06:05) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 06:45) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 07:26) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 08:06) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 08:46) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 09:26) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 10:06) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 10:47) Test running: status = 241, 10% remaining Checking again in 40.2 minutes (i.e. at 11:27) smartctl 7.2 2020-12-30 r5155 [x86_64-w64-mingw32-w10-b19043] (sf-7.2-1) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Mobile (SMR) Device Model: WDC WD20SPZX-60UA7T0 Serial Number: WD-WX92E906WSHF LU WWN Device Id: 5 0014ee 268a28907 Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Form Factor: 2.5 inches TRIM Command: Available, deterministic Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Sep 17 17:02:43 2021 RDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (14760) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 403) minutes. SCT capabilities: (0x303d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 32 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 050 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 100 100 021 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 100 100 030 Pre-fail Always - 6004 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 66 10 Spin_Retry_Count 0x0033 100 100 050 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x003b 100 100 097 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 16 194 Temperature_Celsius 0x0022 033 038 000 Old_age Always - 33 (Min/Max 30/38) 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 240 Head_Flying_Hours 0x0032 100 100 000 Old_age Always - 83192 243 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 811354 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 60 - # 2 Extended offline Aborted by host 10% 60 - # 3 Extended offline Aborted by host 10% 32 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.