smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1062.4.1.el7.x86_64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: MB004000GWKGV Serial Number: V6GZ4EGS LU WWN Device Id: 5 000cca 097cdb3c7 Firmware Version: HPG1 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4, ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Aug 10 08:51:10 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 241) Self-test routine in progress... 10% of test remaining. Total time to complete Offline data collection: ( 87) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 539) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 016 - 0 2 Throughput_Performance POS--- 129 100 054 - 105 3 Spin_Up_Time PO---- 140 100 024 - 301 (Average 303) 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 128 100 020 - 18 9 Power_On_Hours -O--CK 098 098 000 - 18753 10 Spin_Retry_Count PO--C- 100 100 060 - 0 169 Unknown_Attribute PO--CK 100 100 099 - 0 180 Unknown_HDD_Attribute PO-RCK 100 100 098 - 0 194 Temperature_Celsius -O---K 181 166 000 - 33 (Min/Max 22/36) 196 Reallocated_Event_Count PO--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 7 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 688 Pending Defects log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL R/O 9 IDENTIFY DEVICE data log 0x80 GPL R/W 16 Host vendor specific log 0x81-0x9f GPL,SL R/W 16 Host vendor specific log 0xb5 SL VS 1 Device vendor specific log 0xb6 GPL VS 127 Device vendor specific log 0xbb GPL VS 1 Device vendor specific log 0xd0 GPL VS 1 Device vendor specific log 0xd7 GPL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: DST executing in background (3) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 28/33 Celsius Lifetime Min/Max Temperature: 22/36 Celsius Specified Max Operating Temperature: 60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (120) Index Estimated Time Temperature Celsius 121 2021-08-10 06:44 33 ************** 122 2021-08-10 06:45 32 ************* 123 2021-08-10 06:46 33 ************** ... ..( 2 skipped). .. ************** 126 2021-08-10 06:49 33 ************** 127 2021-08-10 06:50 32 ************* ... ..( 6 skipped). .. ************* 6 2021-08-10 06:57 32 ************* 7 2021-08-10 06:58 33 ************** 8 2021-08-10 06:59 32 ************* 9 2021-08-10 07:00 33 ************** 10 2021-08-10 07:01 32 ************* ... ..( 9 skipped). .. ************* 20 2021-08-10 07:11 32 ************* 21 2021-08-10 07:12 33 ************** ... ..( 12 skipped). .. ************** 34 2021-08-10 07:25 33 ************** 35 2021-08-10 07:26 32 ************* 36 2021-08-10 07:27 32 ************* 37 2021-08-10 07:28 33 ************** 38 2021-08-10 07:29 32 ************* 39 2021-08-10 07:30 33 ************** ... ..( 3 skipped). .. ************** 43 2021-08-10 07:34 33 ************** 44 2021-08-10 07:35 32 ************* 45 2021-08-10 07:36 33 ************** ... ..( 8 skipped). .. ************** 54 2021-08-10 07:45 33 ************** 55 2021-08-10 07:46 32 ************* 56 2021-08-10 07:47 33 ************** 57 2021-08-10 07:48 33 ************** 58 2021-08-10 07:49 33 ************** 59 2021-08-10 07:50 32 ************* 60 2021-08-10 07:51 33 ************** 61 2021-08-10 07:52 32 ************* ... ..( 5 skipped). .. ************* 67 2021-08-10 07:58 32 ************* 68 2021-08-10 07:59 33 ************** 69 2021-08-10 08:00 32 ************* ... ..( 11 skipped). .. ************* 81 2021-08-10 08:12 32 ************* 82 2021-08-10 08:13 33 ************** 83 2021-08-10 08:14 32 ************* ... ..( 4 skipped). .. ************* 88 2021-08-10 08:19 32 ************* 89 2021-08-10 08:20 33 ************** 90 2021-08-10 08:21 32 ************* 91 2021-08-10 08:22 32 ************* 92 2021-08-10 08:23 33 ************** 93 2021-08-10 08:24 32 ************* 94 2021-08-10 08:25 33 ************** 95 2021-08-10 08:26 33 ************** 96 2021-08-10 08:27 33 ************** 97 2021-08-10 08:28 32 ************* 98 2021-08-10 08:29 32 ************* 99 2021-08-10 08:30 33 ************** 100 2021-08-10 08:31 32 ************* 101 2021-08-10 08:32 32 ************* 102 2021-08-10 08:33 32 ************* 103 2021-08-10 08:34 33 ************** 104 2021-08-10 08:35 32 ************* ... ..( 13 skipped). .. ************* 118 2021-08-10 08:49 32 ************* 119 2021-08-10 08:50 33 ************** 120 2021-08-10 08:51 33 ************** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 132 --- Lifetime Power-On Resets 0x01 0x010 4 18753 --- Power-on Hours 0x01 0x018 6 59265 --- Logical Sectors Written 0x01 0x020 6 60 --- Number of Write Commands 0x01 0x028 6 1458750440 --- Logical Sectors Read 0x01 0x030 6 2900107 --- Number of Read Commands 0x01 0x038 6 67514261800 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 18744 --- Spindle Motor Power-on Hours 0x03 0x010 4 18744 --- Head Flying Hours 0x03 0x018 4 931 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 33 --- Current Temperature 0x05 0x010 1 32 N-- Average Short Term Temperature 0x05 0x018 1 27 N-- Average Long Term Temperature 0x05 0x020 1 36 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x030 1 35 N-- Highest Average Short Term Temperature 0x05 0x038 1 25 N-- Lowest Average Short Term Temperature 0x05 0x040 1 32 N-- Highest Average Long Term Temperature 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1520 --- Number of Hardware Resets 0x06 0x010 4 1314 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS