smartctl 7.2 2020-12-30 r5155 [Darwin 20.4.0 x86_64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Samsung SSD 860 QVO 1TB Serial Number: S4CZNF0N567603M LU WWN Device Id: 5 002538 e90533690 Firmware Version: RVQ02B6Q User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches TRIM Command: Available, deterministic, zeroed Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Mar 9 11:38:22 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 1579 12 Power_Cycle_Count -O--CK 098 098 000 - 1877 177 Wear_Leveling_Count PO--C- 095 095 000 - 39 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 100 100 010 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 190 Airflow_Temperature_Cel -O--CK 069 039 000 - 31 195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 363 241 Total_LBAs_Written -O--CK 099 099 000 - 30677735347 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented Read GP Log Directory failed SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x04 SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x09 SL R/W 1 Selective self-test log 0x30 SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 SL R/W 1 SCT Command/Status 0xe1 SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log (GP Log 0x03) not supported SMART Error Log Version: 1 No Errors Logged SMART Extended Self-test Log (GP Log 0x07) not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 256 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 31 Celsius Power Cycle Min/Max Temperature: 17/37 Celsius Lifetime Min/Max Temperature: 17/61 Celsius Specified Max Operating Temperature: 70 Celsius Under/Over Temperature Limit Count: 0/0 SMART Status: 0xc24f (PASSED) SCT Temperature History Version: 2 Temperature Sampling Period: 10 minutes Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (19) Index Estimated Time Temperature Celsius 20 2021-03-08 14:20 26 ******* 21 2021-03-08 14:30 27 ******** ... ..( 9 skipped). .. ******** 31 2021-03-08 16:10 27 ******** 32 2021-03-08 16:20 ? - 33 2021-03-08 16:30 25 ****** 34 2021-03-08 16:40 26 ******* 35 2021-03-08 16:50 27 ******** ... ..( 3 skipped). .. ******** 39 2021-03-08 17:30 27 ******** 40 2021-03-08 17:40 26 ******* ... ..( 20 skipped). .. ******* 61 2021-03-08 21:10 26 ******* 62 2021-03-08 21:20 28 ********* 63 2021-03-08 21:30 26 ******* ... ..( 16 skipped). .. ******* 80 2021-03-09 00:20 26 ******* 81 2021-03-09 00:30 ? - 82 2021-03-09 00:40 ? - 83 2021-03-09 00:50 25 ****** 84 2021-03-09 01:00 27 ******** 85 2021-03-09 01:10 28 ********* 86 2021-03-09 01:20 ? - 87 2021-03-09 01:30 24 ***** 88 2021-03-09 01:40 25 ****** 89 2021-03-09 01:50 26 ******* 90 2021-03-09 02:00 26 ******* 91 2021-03-09 02:10 ? - 92 2021-03-09 02:20 25 ****** 93 2021-03-09 02:30 25 ****** 94 2021-03-09 02:40 26 ******* 95 2021-03-09 02:50 27 ******** 96 2021-03-09 03:00 27 ******** 97 2021-03-09 03:10 28 ********* 98 2021-03-09 03:20 28 ********* 99 2021-03-09 03:30 28 ********* 100 2021-03-09 03:40 ? - 101 2021-03-09 03:50 39 ******************** 102 2021-03-09 04:00 ? - 103 2021-03-09 04:10 38 ******************* 104 2021-03-09 04:20 44 ************************* 105 2021-03-09 04:30 37 ****************** 106 2021-03-09 04:40 35 **************** 107 2021-03-09 04:50 34 *************** 108 2021-03-09 05:00 37 ****************** 109 2021-03-09 05:10 32 ************* 110 2021-03-09 05:20 36 ***************** 111 2021-03-09 05:30 40 ********************* 112 2021-03-09 05:40 39 ******************** 113 2021-03-09 05:50 40 ********************* 114 2021-03-09 06:00 38 ******************* 115 2021-03-09 06:10 33 ************** 116 2021-03-09 06:20 31 ************ 117 2021-03-09 06:30 35 **************** 118 2021-03-09 06:40 38 ******************* 119 2021-03-09 06:50 ? - 120 2021-03-09 07:00 32 ************* 121 2021-03-09 07:10 ? - 122 2021-03-09 07:20 25 ****** 123 2021-03-09 07:30 28 ********* 124 2021-03-09 07:40 29 ********** 125 2021-03-09 07:50 31 ************ 126 2021-03-09 08:00 29 ********** 127 2021-03-09 08:10 ? - 0 2021-03-09 08:20 33 ************** 1 2021-03-09 08:30 ? - 2 2021-03-09 08:40 34 *************** 3 2021-03-09 08:50 34 *************** 4 2021-03-09 09:00 28 ********* 5 2021-03-09 09:10 33 ************** 6 2021-03-09 09:20 32 ************* 7 2021-03-09 09:30 37 ****************** 8 2021-03-09 09:40 33 ************** 9 2021-03-09 09:50 31 ************ 10 2021-03-09 10:00 30 *********** 11 2021-03-09 10:10 31 ************ 12 2021-03-09 10:20 32 ************* 13 2021-03-09 10:30 29 ********** 14 2021-03-09 10:40 31 ************ 15 2021-03-09 10:50 29 ********** 16 2021-03-09 11:00 32 ************* 17 2021-03-09 11:10 32 ************* 18 2021-03-09 11:20 32 ************* 19 2021-03-09 11:30 31 ************ SMART WRITE LOG does not return COUNT and LBA_LOW register SCT (Get) Error Recovery Control command failed Device Statistics (SMART Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 1877 --- Lifetime Power-On Resets 0x01 0x010 4 1579 --- Power-on Hours 0x01 0x018 6 30677735347 --- Logical Sectors Written 0x01 0x020 6 894719173 --- Number of Write Commands 0x01 0x028 6 32960558260 --- Logical Sectors Read 0x01 0x030 6 953250385 --- Number of Read Commands 0x01 0x038 6 2245000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 31 --- Current Temperature 0x05 0x020 1 61 --- Highest Temperature 0x05 0x028 1 17 --- Lowest Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 5542 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 5 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented Read SATA Phy Event Counters failed