smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.9.0-0.bpo.5-amd64] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: ST33000650NS 81Y9799 81Y3865IBM Firmware Version: BB3A User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sat Jan 23 12:14:03 2021 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 600) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 449) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10bd) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 083 063 044 - 215501638 3 Spin_Up_Time PO---- 092 091 000 - 0 4 Start_Stop_Count -O--CK 100 100 020 - 107 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 082 060 030 - 4491419574 9 Power_On_Hours -O--CK 025 025 000 - 66216 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 100 100 020 - 107 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 087 087 000 - 13 188 Command_Timeout -O--CK 100 099 000 - 4295032833 189 High_Fly_Writes -O-RCK 100 100 000 - 0 190 Airflow_Temperature_Cel -O---K 067 046 045 - 33 (Min/Max 30/35) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 100 100 000 - 105 193 Load_Cycle_Count -O--CK 099 099 000 - 2845 194 Temperature_Celsius -O---K 033 054 000 - 33 (0 24 0 0 0) 195 Hardware_ECC_Recovered -O-RC- 023 004 000 - 215501638 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL,SL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xb0 GPL,SL VS 1 Device vendor specific log 0xbd GPL VS 252 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 23 (device log contains only the most recent 20 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 23 [2] occurred at disk power-on lifetime: 57246 hours (2385 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 24 18 14 00 00 Error: UNC at LBA = 0x6c241814 = 1814304788 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 6c 23 e3 00 40 00 41d+20:04:47.822 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 23 e2 00 40 00 41d+20:04:47.814 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 23 e1 00 40 00 41d+20:04:47.813 READ FPDMA QUEUED 42 00 00 01 00 00 00 6c 23 e0 00 40 00 41d+20:04:47.804 READ VERIFY SECTOR(S) EXT 61 00 00 01 00 00 00 6c 23 e0 00 40 00 41d+20:04:47.680 WRITE FPDMA QUEUED Error 22 [1] occurred at disk power-on lifetime: 57246 hours (2385 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 23 e0 0a 00 00 Error: UNC at LBA = 0x6c23e00a = 1814290442 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 6c 18 d5 00 40 00 41d+20:04:42.288 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 18 d4 00 40 00 41d+20:04:42.275 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 18 d3 00 40 00 41d+20:04:42.274 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 18 d2 00 40 00 41d+20:04:42.273 READ FPDMA QUEUED 60 00 00 01 00 00 00 63 cc 47 00 40 00 41d+20:04:42.191 READ FPDMA QUEUED Error 21 [0] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 24 3d 0b 00 00 Error: UNC at LBA = 0x6c243d0b = 1814314251 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 28 00 00 6c 24 3d 00 40 00 41d+19:05:39.226 READ FPDMA QUEUED 60 00 00 01 00 00 00 4a 83 a5 00 40 00 41d+19:05:39.225 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 3f 00 40 00 41d+19:05:39.199 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 3e 00 40 00 41d+19:05:39.190 READ FPDMA QUEUED 60 00 00 00 0b 00 00 6c 24 3d 00 40 00 41d+19:05:39.137 READ FPDMA QUEUED Error 20 [19] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 24 3d 0b 00 00 Error: UNC at LBA = 0x6c243d0b = 1814314251 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 6c 24 3d 00 40 00 41d+19:05:36.482 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 3c 00 40 00 41d+19:05:36.477 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 3a 00 40 00 41d+19:05:36.465 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 39 00 40 00 41d+19:05:36.458 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 38 00 40 00 41d+19:05:36.452 READ FPDMA QUEUED Error 19 [18] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 24 33 ce 00 00 Error: UNC at LBA = 0x6c2433ce = 1814311886 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 32 00 00 6c 24 33 ce 40 00 41d+19:05:33.120 READ FPDMA QUEUED 60 00 00 01 00 00 00 4a 83 a3 00 40 00 41d+19:05:33.119 READ FPDMA QUEUED 60 00 00 00 a5 00 00 6c 24 33 28 40 00 41d+19:05:33.103 READ FPDMA QUEUED 2f 00 00 00 01 00 00 00 00 00 10 00 00 41d+19:05:33.058 READ LOG EXT 60 00 00 01 00 00 00 6c 24 37 00 40 00 41d+19:05:30.478 READ FPDMA QUEUED Error 18 [17] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 24 33 cd 00 00 Error: UNC at LBA = 0x6c2433cd = 1814311885 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 6c 24 37 00 40 00 41d+19:05:30.478 READ FPDMA QUEUED 60 00 00 00 d8 00 00 6c 24 33 28 40 00 41d+19:05:30.478 READ FPDMA QUEUED 60 00 00 00 28 00 00 6c 24 33 00 40 00 41d+19:05:30.478 READ FPDMA QUEUED 60 00 00 01 00 00 00 4a 83 a2 00 40 00 41d+19:05:30.477 READ FPDMA QUEUED 60 00 00 01 00 00 00 4a 83 a1 00 40 00 41d+19:05:30.476 READ FPDMA QUEUED Error 17 [16] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 24 33 cd 00 00 Error: UNC at LBA = 0x6c2433cd = 1814311885 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 01 00 00 00 6c 24 33 00 40 00 41d+19:05:27.787 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 32 00 40 00 41d+19:05:27.782 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 31 00 40 00 41d+19:05:27.776 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 30 00 40 00 41d+19:05:27.771 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 2f 00 40 00 41d+19:05:27.764 READ FPDMA QUEUED Error 16 [15] occurred at disk power-on lifetime: 57245 hours (2385 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 6c 24 2a 90 00 00 Error: UNC at LBA = 0x6c242a90 = 1814309520 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 d8 00 00 6c 24 2a 28 40 00 41d+19:05:24.834 READ FPDMA QUEUED 60 00 00 01 00 00 00 4a 83 9b 00 40 00 41d+19:05:24.834 READ FPDMA QUEUED 60 00 00 00 28 00 00 6c 24 2a 00 40 00 41d+19:05:24.824 READ FPDMA QUEUED 60 00 00 01 00 00 00 4a 83 9a 00 40 00 41d+19:05:24.819 READ FPDMA QUEUED 60 00 00 01 00 00 00 6c 24 2c 00 40 00 41d+19:05:24.818 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 680 - # 2 Extended offline Completed without error 00% 671 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 33 Celsius Power Cycle Min/Max Temperature: 30/35 Celsius Lifetime Min/Max Temperature: 23/54 Celsius Under/Over Temperature Limit Count: 0/151 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/ 0 Celsius Min/Max Temperature Limit: 0/ 0 Celsius Temperature History Size (Index): 128 (79) Index Estimated Time Temperature Celsius 80 2021-01-22 15:00 33 ************** ... ..( 21 skipped). .. ************** 102 2021-01-22 18:40 33 ************** 103 2021-01-22 18:50 32 ************* 104 2021-01-22 19:00 33 ************** ... ..( 4 skipped). .. ************** 109 2021-01-22 19:50 33 ************** 110 2021-01-22 20:00 32 ************* 111 2021-01-22 20:10 33 ************** 112 2021-01-22 20:20 32 ************* 113 2021-01-22 20:30 33 ************** 114 2021-01-22 20:40 33 ************** 115 2021-01-22 20:50 34 *************** 116 2021-01-22 21:00 34 *************** 117 2021-01-22 21:10 34 *************** 118 2021-01-22 21:20 35 **************** 119 2021-01-22 21:30 34 *************** 120 2021-01-22 21:40 35 **************** 121 2021-01-22 21:50 34 *************** ... ..( 4 skipped). .. *************** 126 2021-01-22 22:40 34 *************** 127 2021-01-22 22:50 35 **************** 0 2021-01-22 23:00 34 *************** ... ..( 26 skipped). .. *************** 27 2021-01-23 03:30 34 *************** 28 2021-01-23 03:40 33 ************** ... ..( 2 skipped). .. ************** 31 2021-01-23 04:10 33 ************** 32 2021-01-23 04:20 32 ************* 33 2021-01-23 04:30 33 ************** 34 2021-01-23 04:40 32 ************* 35 2021-01-23 04:50 33 ************** 36 2021-01-23 05:00 32 ************* 37 2021-01-23 05:10 33 ************** 38 2021-01-23 05:20 32 ************* 39 2021-01-23 05:30 33 ************** 40 2021-01-23 05:40 32 ************* 41 2021-01-23 05:50 33 ************** 42 2021-01-23 06:00 32 ************* 43 2021-01-23 06:10 33 ************** 44 2021-01-23 06:20 32 ************* 45 2021-01-23 06:30 33 ************** 46 2021-01-23 06:40 32 ************* 47 2021-01-23 06:50 32 ************* 48 2021-01-23 07:00 33 ************** 49 2021-01-23 07:10 32 ************* 50 2021-01-23 07:20 33 ************** 51 2021-01-23 07:30 32 ************* 52 2021-01-23 07:40 33 ************** 53 2021-01-23 07:50 32 ************* 54 2021-01-23 08:00 33 ************** 55 2021-01-23 08:10 34 *************** 56 2021-01-23 08:20 33 ************** 57 2021-01-23 08:30 32 ************* 58 2021-01-23 08:40 33 ************** ... ..( 4 skipped). .. ************** 63 2021-01-23 09:30 33 ************** 64 2021-01-23 09:40 32 ************* 65 2021-01-23 09:50 33 ************** 66 2021-01-23 10:00 32 ************* 67 2021-01-23 10:10 33 ************** 68 2021-01-23 10:20 32 ************* 69 2021-01-23 10:30 33 ************** 70 2021-01-23 10:40 32 ************* 71 2021-01-23 10:50 33 ************** 72 2021-01-23 11:00 32 ************* 73 2021-01-23 11:10 33 ************** 74 2021-01-23 11:20 32 ************* 75 2021-01-23 11:30 33 ************** ... ..( 3 skipped). .. ************** 79 2021-01-23 12:10 33 ************** SCT Error Recovery Control: Read: 300 (30.0 seconds) Write: 300 (30.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x0001 2 0 Command failed due to ICRC error 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS