smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.19.0-8-amd64] (local build) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: Samsung SSD 850 PRO 2TB Serial Number: S2KMNCAGB01383M LU WWN Device Id: 5 002538 c7000f67a Firmware Version: EXM02B6Q User Capacity: 2,048,408,248,320 bytes [2.04 TB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Apr 10 14:12:22 2020 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x53) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 600) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 5 Reallocated_Sector_Ct PO--CK 099 099 010 - 101 9 Power_On_Hours -O--CK 092 092 000 - 36022 12 Power_Cycle_Count -O--CK 099 099 000 - 129 177 Wear_Leveling_Count PO--C- 099 099 000 - 17 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 099 099 010 - 101 181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0 183 Runtime_Bad_Block PO--C- 099 099 010 - 101 187 Reported_Uncorrect -O--CK 085 085 000 - 148592 190 Airflow_Temperature_Cel -O--CK 077 063 000 - 23 195 Hardware_ECC_Recovered -O-RC- 001 001 000 - 148592 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 235 Unknown_Attribute -O--C- 099 099 000 - 61 241 Total_LBAs_Written -O--CK 099 099 000 - 29619424584 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 SL VS 16 Device vendor specific log 0xa5 SL VS 16 Device vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) Device Error Count: 65535 (device log contains only the most recent 4 errors) CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 65535 [1] occurred at disk power-on lifetime: 36022 hours (1500 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 51 00 01 00 00 00 00 00 10 00 00 Error: at LBA = 0x00000010 = 16 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 4b 30 ee 7a 00 00 23:58:22.000 READ FPDMA QUEUED 60 00 08 00 70 00 00 3b 5b c1 ca 00 0e 23:58:22.000 READ FPDMA QUEUED 60 00 08 00 68 00 00 17 da 63 ea 00 0d 23:58:22.000 READ FPDMA QUEUED 60 00 08 00 60 00 00 11 18 39 22 00 0c 23:58:22.000 READ FPDMA QUEUED 60 00 08 00 58 00 00 21 96 ab 12 00 0b 23:58:22.000 READ FPDMA QUEUED Error 65534 [0] occurred at disk power-on lifetime: 36022 hours (1500 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 51 00 01 00 00 00 00 00 10 00 00 Error: at LBA = 0x00000010 = 16 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 78 00 00 9f 77 42 92 00 0f 23:58:22.000 READ FPDMA QUEUED 60 00 08 00 70 00 00 e1 51 0a 92 00 0e 23:58:22.000 READ FPDMA QUEUED 60 00 08 00 60 00 00 11 18 39 12 00 0c 23:58:22.000 READ FPDMA QUEUED 60 00 08 00 58 00 00 3b 5b c1 ba 00 0b 23:58:22.000 READ FPDMA QUEUED 60 00 08 00 50 00 00 3b 52 2f 72 00 0a 23:58:22.000 READ FPDMA QUEUED Error 65533 [3] occurred at disk power-on lifetime: 36022 hours (1500 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 51 00 01 00 00 00 00 00 10 00 00 Error: at LBA = 0x00000010 = 16 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 00 00 00 3b 52 2f 52 00 00 23:58:21.000 READ FPDMA QUEUED 60 00 08 00 70 00 00 17 da 63 c2 00 0e 23:58:21.000 READ FPDMA QUEUED 60 00 08 00 68 00 00 3b 5b c1 a2 00 0d 23:58:21.000 READ FPDMA QUEUED 60 00 08 00 60 00 00 9f 77 42 7a 00 0c 23:58:21.000 READ FPDMA QUEUED 60 00 08 00 58 00 00 10 e3 44 e2 00 0b 23:58:21.000 READ FPDMA QUEUED Error 65532 [2] occurred at disk power-on lifetime: 36022 hours (1500 days + 22 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 00 -- 51 00 01 00 00 00 00 00 10 00 00 Error: at LBA = 0x00000010 = 16 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 08 00 68 00 00 ca bc e8 c2 00 0d 23:58:21.000 READ FPDMA QUEUED 60 00 08 00 60 00 00 4b 30 ee 42 00 0c 23:58:21.000 READ FPDMA QUEUED 60 00 08 00 58 00 00 17 da 63 b2 00 0b 23:58:21.000 READ FPDMA QUEUED 60 00 08 00 50 00 00 21 96 aa da 00 0a 23:58:21.000 READ FPDMA QUEUED 60 00 08 00 48 00 00 3b 54 10 6a 00 09 23:58:21.000 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 36022 - # 2 Extended offline Completed: read failure 90% 36022 294710600 # 3 Extended offline Completed: read failure 90% 36022 294710600 # 4 Extended offline Completed: read failure 90% 36019 294710600 # 5 Extended offline Completed: read failure 90% 35999 294710600 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 0 65535 Read_scanning was never started Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) SCT Support Level: 1 Device State: SCT command executing in background (5) Current Temperature: 23 Celsius Power Cycle Min/Max Temperature: 22/36 Celsius Lifetime Min/Max Temperature: 0/70 Celsius Under/Over Temperature Limit Count: 560110704/3893493760 SMART Status: 0xd41b (Reserved) SCT Temperature History Version: 3 (Unknown, should be 2) Temperature Sampling Period: 1 minute Temperature Logging Interval: 10 minutes Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (21) Index Estimated Time Temperature Celsius 22 2020-04-09 17:00 31 ************ 23 2020-04-09 17:10 34 *************** 24 2020-04-09 17:20 34 *************** 25 2020-04-09 17:30 28 ********* 26 2020-04-09 17:40 27 ******** 27 2020-04-09 17:50 28 ********* ... ..( 6 skipped). .. ********* 34 2020-04-09 19:00 28 ********* 35 2020-04-09 19:10 27 ******** 36 2020-04-09 19:20 29 ********** 37 2020-04-09 19:30 28 ********* 38 2020-04-09 19:40 28 ********* 39 2020-04-09 19:50 27 ******** 40 2020-04-09 20:00 28 ********* ... ..( 2 skipped). .. ********* 43 2020-04-09 20:30 28 ********* 44 2020-04-09 20:40 29 ********** 45 2020-04-09 20:50 27 ******** 46 2020-04-09 21:00 31 ************ 47 2020-04-09 21:10 29 ********** 48 2020-04-09 21:20 28 ********* 49 2020-04-09 21:30 28 ********* 50 2020-04-09 21:40 29 ********** 51 2020-04-09 21:50 28 ********* 52 2020-04-09 22:00 29 ********** 53 2020-04-09 22:10 27 ******** 54 2020-04-09 22:20 28 ********* 55 2020-04-09 22:30 28 ********* 56 2020-04-09 22:40 30 *********** 57 2020-04-09 22:50 30 *********** 58 2020-04-09 23:00 29 ********** 59 2020-04-09 23:10 28 ********* 60 2020-04-09 23:20 29 ********** 61 2020-04-09 23:30 27 ******** 62 2020-04-09 23:40 28 ********* 63 2020-04-09 23:50 28 ********* 64 2020-04-10 00:00 28 ********* 65 2020-04-10 00:10 27 ******** 66 2020-04-10 00:20 28 ********* 67 2020-04-10 00:30 28 ********* 68 2020-04-10 00:40 28 ********* 69 2020-04-10 00:50 27 ******** ... ..( 2 skipped). .. ******** 72 2020-04-10 01:20 27 ******** 73 2020-04-10 01:30 28 ********* 74 2020-04-10 01:40 27 ******** ... ..( 2 skipped). .. ******** 77 2020-04-10 02:10 27 ******** 78 2020-04-10 02:20 28 ********* 79 2020-04-10 02:30 27 ******** 80 2020-04-10 02:40 28 ********* 81 2020-04-10 02:50 28 ********* 82 2020-04-10 03:00 27 ******** 83 2020-04-10 03:10 28 ********* 84 2020-04-10 03:20 26 ******* 85 2020-04-10 03:30 28 ********* 86 2020-04-10 03:40 27 ******** 87 2020-04-10 03:50 27 ******** 88 2020-04-10 04:00 27 ******** 89 2020-04-10 04:10 26 ******* 90 2020-04-10 04:20 27 ******** 91 2020-04-10 04:30 27 ******** 92 2020-04-10 04:40 27 ******** 93 2020-04-10 04:50 26 ******* 94 2020-04-10 05:00 26 ******* 95 2020-04-10 05:10 27 ******** 96 2020-04-10 05:20 26 ******* 97 2020-04-10 05:30 25 ****** 98 2020-04-10 05:40 27 ******** 99 2020-04-10 05:50 27 ******** 100 2020-04-10 06:00 26 ******* 101 2020-04-10 06:10 26 ******* 102 2020-04-10 06:20 26 ******* 103 2020-04-10 06:30 27 ******** 104 2020-04-10 06:40 28 ********* 105 2020-04-10 06:50 26 ******* 106 2020-04-10 07:00 27 ******** 107 2020-04-10 07:10 26 ******* ... ..( 2 skipped). .. ******* 110 2020-04-10 07:40 26 ******* 111 2020-04-10 07:50 27 ******** 112 2020-04-10 08:00 28 ********* 113 2020-04-10 08:10 27 ******** 114 2020-04-10 08:20 28 ********* 115 2020-04-10 08:30 27 ******** 116 2020-04-10 08:40 28 ********* 117 2020-04-10 08:50 27 ******** ... ..( 2 skipped). .. ******** 120 2020-04-10 09:20 27 ******** 121 2020-04-10 09:30 28 ********* 122 2020-04-10 09:40 27 ******** 123 2020-04-10 09:50 28 ********* 124 2020-04-10 10:00 28 ********* 125 2020-04-10 10:10 28 ********* 126 2020-04-10 10:20 27 ******** 127 2020-04-10 10:30 28 ********* 0 2020-04-10 10:40 27 ******** 1 2020-04-10 10:50 27 ******** 2 2020-04-10 11:00 28 ********* 3 2020-04-10 11:10 35 **************** 4 2020-04-10 11:20 28 ********* 5 2020-04-10 11:30 28 ********* 6 2020-04-10 11:40 36 ***************** 7 2020-04-10 11:50 27 ******** 8 2020-04-10 12:00 27 ******** 9 2020-04-10 12:10 28 ********* 10 2020-04-10 12:20 36 ***************** 11 2020-04-10 12:30 29 ********** 12 2020-04-10 12:40 27 ******** 13 2020-04-10 12:50 27 ******** 14 2020-04-10 13:00 28 ********* 15 2020-04-10 13:10 28 ********* 16 2020-04-10 13:20 28 ********* 17 2020-04-10 13:30 34 *************** 18 2020-04-10 13:40 28 ********* 19 2020-04-10 13:50 31 ************ 20 2020-04-10 14:00 23 **** 21 2020-04-10 14:10 23 **** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 7 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 7 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC