smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1062.1.2.el7.x86_64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: MB012000GWDFE Serial Number: AAH0YTVH LU WWN Device Id: 5 000cca 278ce8760 Firmware Version: HPG2 User Capacity: 12,000,138,625,024 bytes [12.0 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-4, ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Dec 4 12:19:01 2019 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Disabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Unavailable === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 87) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: (1305) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 100 100 016 - 0 2 Throughput_Performance POS--- 132 100 054 - 96 3 Spin_Up_Time PO---- 165 100 024 - 397 (Average 403) 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 7 Seek_Error_Rate POSR-- 100 100 067 - 0 8 Seek_Time_Performance P-S--- 128 100 020 - 18 9 Power_On_Hours -O--CK 099 099 000 - 7403 10 Spin_Retry_Count PO--C- 100 100 060 - 0 22 Unknown_Attribute PO---K 100 100 025 - 100 169 Unknown_Attribute PO--CK 100 100 099 - 0 180 Unknown_HDD_Attribute PO-RCK 100 100 098 - 0 194 Temperature_Celsius -O---K 222 214 000 - 27 (Min/Max 19/29) 196 Reallocated_Event_Count PO--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 7 Device Statistics log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0c GPL R/O 5501 Pending Defects log 0x0d GPL R/O 7 LPS Mis-alignment log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL R/O 9 IDENTIFY DEVICE data log 0x80 GPL R/W 16 Host vendor specific log 0x81-0x9f GPL,SL R/W 16 Host vendor specific log 0xb5 SL VS 1 Device vendor specific log 0xb6 GPL VS 127 Device vendor specific log 0xbb GPL VS 1 Device vendor specific log 0xd0 GPL VS 1 Device vendor specific log 0xd7 GPL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 23/29 Celsius Lifetime Min/Max Temperature: 19/29 Celsius Specified Max Operating Temperature: 60 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -40/70 Celsius Temperature History Size (Index): 128 (69) Index Estimated Time Temperature Celsius 70 2019-12-04 10:12 27 ******** 71 2019-12-04 10:13 26 ******* ... ..( 3 skipped). .. ******* 75 2019-12-04 10:17 26 ******* 76 2019-12-04 10:18 27 ******** ... ..( 9 skipped). .. ******** 86 2019-12-04 10:28 27 ******** 87 2019-12-04 10:29 26 ******* ... ..( 4 skipped). .. ******* 92 2019-12-04 10:34 26 ******* 93 2019-12-04 10:35 27 ******** ... ..( 9 skipped). .. ******** 103 2019-12-04 10:45 27 ******** 104 2019-12-04 10:46 26 ******* 105 2019-12-04 10:47 26 ******* 106 2019-12-04 10:48 26 ******* 107 2019-12-04 10:49 27 ******** ... ..( 12 skipped). .. ******** 120 2019-12-04 11:02 27 ******** 121 2019-12-04 11:03 26 ******* 122 2019-12-04 11:04 26 ******* 123 2019-12-04 11:05 27 ******** ... ..( 13 skipped). .. ******** 9 2019-12-04 11:19 27 ******** 10 2019-12-04 11:20 26 ******* 11 2019-12-04 11:21 27 ******** ... ..( 12 skipped). .. ******** 24 2019-12-04 11:34 27 ******** 25 2019-12-04 11:35 26 ******* 26 2019-12-04 11:36 26 ******* 27 2019-12-04 11:37 27 ******** ... ..( 12 skipped). .. ******** 40 2019-12-04 11:50 27 ******** 41 2019-12-04 11:51 26 ******* 42 2019-12-04 11:52 27 ******** ... ..( 12 skipped). .. ******** 55 2019-12-04 12:05 27 ******** 56 2019-12-04 12:06 26 ******* 57 2019-12-04 12:07 27 ******** ... ..( 11 skipped). .. ******** 69 2019-12-04 12:19 27 ******** SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 27 --- Lifetime Power-On Resets 0x01 0x010 4 7403 --- Power-on Hours 0x01 0x018 6 778061185 --- Logical Sectors Written 0x01 0x020 6 1642197 --- Number of Write Commands 0x01 0x028 6 434529307 --- Logical Sectors Read 0x01 0x030 6 903549 --- Number of Read Commands 0x01 0x038 6 26651183950 --- Date and Time TimeStamp 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 7401 --- Spindle Motor Power-on Hours 0x03 0x010 4 7401 --- Head Flying Hours 0x03 0x018 4 334 --- Head Load Events 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors 0x03 0x028 4 0 --- Read Recovery Attempts 0x03 0x030 4 0 --- Number of Mechanical Start Failures 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 27 --- Current Temperature 0x05 0x010 1 26 N-- Average Short Term Temperature 0x05 0x018 1 26 N-- Average Long Term Temperature 0x05 0x020 1 29 --- Highest Temperature 0x05 0x028 1 19 --- Lowest Temperature 0x05 0x030 1 28 N-- Highest Average Short Term Temperature 0x05 0x038 1 23 N-- Lowest Average Short Term Temperature 0x05 0x040 1 27 N-- Highest Average Long Term Temperature 0x05 0x048 1 24 N-- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 60 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 12 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) No Defects Logged SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 12 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 13 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS