# smartctl -a /dev/sde smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.18-10-pve] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SuperMicro SSD Serial Number: SMC0515D90717B6J6896 LU WWN Device Id: 5 15d907 17b000896 Firmware Version: SOB20R User Capacity: 31,675,383,808 bytes [31.6 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon Mar 11 13:41:22 2019 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x71) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 10) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 7830 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 14 15 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 61865984 160 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 161 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 162 163 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 11 164 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 55249 165 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 131 166 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 4 167 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 26 168 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 3000 172 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0 175 Program_Fail_Count_Chip 0x0000 100 100 000 Old_age Offline - 11 177 Wear_Leveling_Count 0x0000 100 100 000 Old_age Offline - 2 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 187 Reported_Uncorrect 0x0000 100 100 000 Old_age Offline - 0 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 1 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 34 (Min/Max 19/50) 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 5499 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 0 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 100 100 000 Old_age Offline - 78 231 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 100 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 233 Media_Wearout_Indicator 0x0000 100 100 000 Old_age Offline - 863 241 Total_LBAs_Written 0x0000 100 100 000 Old_age Offline - 370 242 Total_LBAs_Read 0x0000 100 100 000 Old_age Offline - 222 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.