smartctl 6.7 2018-12-11 r4856 [armv7l-linux-4.14.78-odroidxu4] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: MZ7KM960HMJP0D3 Add. Product Id: DELL(tm) Firmware Version: GD53 User Capacity: 960,197,124,096 bytes [960 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri Jan 4 20:50:01 2019 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 21) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 3600) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 60) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -O-RC- 200 200 000 - 0 5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 099 099 000 - 5 12 Power_Cycle_Count -O--CK 099 099 000 - 4 13 Read_Soft_Error_Rate -O-RC- 200 200 000 - 0 177 Wear_Leveling_Count PO--C- 100 099 005 - 0 179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot -O--C- 100 100 000 - 5490 181 Program_Fail_Cnt_Total -O--CK 100 100 000 - 0 182 Erase_Fail_Count_Total -O--CK 100 100 000 - 0 184 End-to-End_Error PO--CK 100 100 097 - 0 194 Temperature_Celsius -O---K 065 063 000 - 35 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0 201 Unknown_SSD_Attribute PO--CK 100 100 001 - 0 202 Unknown_SSD_Attribute PO--CK 100 100 010 - 0 233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 235 Unknown_Attribute -O--C- 100 100 000 - 0 242 Total_LBAs_Read -O--CK 099 099 000 - 10553 243 Unknown_Attribute -O--CK 100 100 000 - 0 244 Unknown_Attribute -O--CK 100 100 000 - 0 245 Unknown_Attribute -O-RCK 100 100 000 - 100 246 Unknown_Attribute -O--CK 100 100 000 - 65535 247 Unknown_Attribute -O--CK 100 100 000 - 65535 248 Unknown_Attribute -O--CK 100 100 000 - 65535 251 Unknown_Attribute -O--CK 100 100 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x24 GPL R/O 8 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x98 GPL,SL R/W 16 Host vendor specific log 0x99-0x9a GPL,SL R/W 1 Host vendor specific log 0x9b-0x9f GPL,SL R/W 16 Host vendor specific log 0xce SL VS 16 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 50% 2 - # 2 Short offline Completed without error 00% 2 - # 3 Extended offline Aborted by host 50% 0 - # 4 Extended offline Aborted by host 50% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing 255 993386240 993451775 Read_scanning was completed without error Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 256 (0x0100) Device State: SCT command executing in background (5) Current Temperature: 35 Celsius Power Cycle Min/Max Temperature: 30/37 Celsius Lifetime Min/Max Temperature: 22/37 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 128 (46) Index Estimated Time Temperature Celsius 47 2019-01-04 18:43 ? - ... ..( 79 skipped). .. - 127 2019-01-04 20:03 ? - 0 2019-01-04 20:04 35 **************** 1 2019-01-04 20:05 ? - 2 2019-01-04 20:06 29 ********** 3 2019-01-04 20:07 31 ************ 4 2019-01-04 20:08 32 ************* 5 2019-01-04 20:09 34 *************** 6 2019-01-04 20:10 ? - 7 2019-01-04 20:11 35 **************** 8 2019-01-04 20:12 35 **************** 9 2019-01-04 20:13 ? - 10 2019-01-04 20:14 36 ***************** ... ..( 2 skipped). .. ***************** 13 2019-01-04 20:17 36 ***************** 14 2019-01-04 20:18 ? - 15 2019-01-04 20:19 37 ****************** ... ..( 3 skipped). .. ****************** 19 2019-01-04 20:23 37 ****************** 20 2019-01-04 20:24 ? - 21 2019-01-04 20:25 37 ****************** ... ..( 2 skipped). .. ****************** 24 2019-01-04 20:28 37 ****************** 25 2019-01-04 20:29 ? - 26 2019-01-04 20:30 37 ****************** 27 2019-01-04 20:31 ? - 28 2019-01-04 20:32 37 ****************** ... ..( 3 skipped). .. ****************** 32 2019-01-04 20:36 37 ****************** 33 2019-01-04 20:37 ? - 34 2019-01-04 20:38 37 ****************** 35 2019-01-04 20:39 37 ****************** 36 2019-01-04 20:40 37 ****************** 37 2019-01-04 20:41 ? - 38 2019-01-04 20:42 34 *************** 39 2019-01-04 20:43 35 **************** 40 2019-01-04 20:44 36 ***************** 41 2019-01-04 20:45 ? - 42 2019-01-04 20:46 37 ****************** 43 2019-01-04 20:47 37 ****************** 44 2019-01-04 20:48 37 ****************** 45 2019-01-04 20:49 ? - 46 2019-01-04 20:50 35 **************** SCT Error Recovery Control: Read: 80 (8.0 seconds) Write: 80 (8.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 4 --- Lifetime Power-On Resets 0x01 0x010 4 5 --- Power-on Hours 0x01 0x018 6 0 --- Logical Sectors Written 0x01 0x020 6 1 --- Number of Write Commands 0x01 0x028 6 10553 --- Logical Sectors Read 0x01 0x030 6 42011 --- Number of Read Commands 0x01 0x038 6 2759000 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 35 --- Current Temperature 0x05 0x020 1 37 --- Highest Temperature 0x05 0x028 1 22 --- Lowest Temperature 0x05 0x058 1 55 --- Specified Maximum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 33 --- Number of Hardware Resets 0x06 0x010 4 0 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 N-- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 4 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC