smartctl 6.6 2017-11-05 r4594 [x86_64-w64-mingw32-2016-1607] (sf-6.6-1) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Dell Certified Intel S4x00/D3-S4x10 Series SSDs Device Model: SSDSC2KB038T7R Serial Number: PHYS7461009N3P8EGN LU WWN Device Id: 5 5cd2e4 14e3c0391 Add. Product Id: DELL(tm) Firmware Version: SCV1DL56 User Capacity: 3,840,755,982,336 bytes [3.84 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Dec 18 11:22:53 2018 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 60) minutes. Conveyance self-test routine recommended polling time: ( 60) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -OSR-- 130 130 039 - 11718934 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 9 Power_On_Hours -O--CK 100 100 000 - 617 12 Power_Cycle_Count -O--CK 100 100 000 - 45 13 Read_Soft_Error_Rate -OSRC- 085 085 000 - 1417350926614 170 Available_Reserved_SpacePO--CK 100 100 010 - 0 174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 42 179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 42040 181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 100 100 000 - 24 195 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 201 Power_Loss_Cap_Test PO--CK 100 100 010 - 2703 (51 2) 202 End_of_Life POS--K 100 100 000 - 0 225 Host_Writes_32MiB -O--CK 100 100 000 - 99086 226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 228 Workload_Minutes -O--CK 100 100 000 - 65535 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Total_LBAs_Written -O--CK 100 100 000 - 99086 234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 241 Total_LBAs_Written -O--CK 100 100 000 - 99086 242 Total_LBAs_Read -O--CK 100 100 000 - 55828 245 Percent_Life_Remaining -O--CK 100 100 000 - 100 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x02 SL R/O 8 Comprehensive SMART error log 0x03 GPL R/O 20 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x99-0x9a GPL,SL R/W 1 Host vendor specific log 0xb8 SL VS 1 Device vendor specific log 0xb9 SL VS 240 Device vendor specific log 0xba GPL VS 1280 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 8 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (20 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 617 - Read SMART Selective Self-test Log failed: Input/output error Read SCT Status failed: Input/output error Read SCT Status failed: Input/output error SCT (Get) Error Recovery Control command failed ATA_READ_LOG_EXT (addr=0x04:0x00, page=0, n=1) failed: Input/output error Read Device Statistics page 0x00 failed Pending Defects log (GP Log 0x0c) not supported ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: Input/output error Read SATA Phy Event Counters failed