smartctl 6.6 2017-11-05 r4594 [x86_64-w64-mingw32-2016-1607] (sf-6.6-1) Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Dell Certified Intel S3520 Series SSDs Device Model: SSDSC2BB120G7R Serial Number: PHDV715602G4150MGN LU WWN Device Id: 5 5cd2e4 14d79c22b Add. Product Id: DELL(tm) Firmware Version: N201DL42 User Capacity: 120,034,123,776 bytes [120 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Tue Dec 18 11:18:35 2018 PST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Unavailable Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 2) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 60) minutes. Conveyance self-test routine recommended polling time: ( 60) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate -OSR-- 130 130 039 - 11727480 5 Reallocated_Sector_Ct PO--CK 100 100 001 - 0 9 Power_On_Hours -O--CK 100 100 000 - 1005 12 Power_Cycle_Count -O--CK 100 100 000 - 50 13 Read_Soft_Error_Rate -OSRC- 130 130 000 - 11727480 170 Available_Reserved_SpacePO--CK 100 100 010 - 0 174 Unsafe_Shutdown_Count -O--CK 100 100 000 - 49 179 Used_Rsvd_Blk_Cnt_Tot PO--CK 100 100 010 - 0 180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 5794 181 Program_Fail_Cnt_Total -O-RCK 100 100 000 - 0 182 Erase_Fail_Count_Total -O-RCK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 100 100 000 - 27 195 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 CRC_Error_Count -OSRCK 100 100 000 - 0 201 Power_Loss_Cap_Test PO--CK 100 100 010 - 15030 (62 5) 202 End_of_Life POS--K 100 100 000 - 0 225 Host_Writes_32MiB -O--CK 100 100 000 - 2 226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 102400 227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 228 Workload_Minutes -O--CK 100 100 000 - 4169854476 232 Available_Reservd_Space PO--CK 100 100 010 - 0 233 Total_LBAs_Written -O--CK 100 100 000 - 2 234 Thermal_Throttle_Status -O--CK 100 100 000 - 0/0 241 Total_LBAs_Written -O--CK 100 100 000 - 2 242 Total_LBAs_Read -O--CK 100 100 000 - 6122 245 Percent_Life_Remaining -O--CK 100 100 000 - 100 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x02 SL R/O 8 Comprehensive SMART error log 0x03 GPL R/O 20 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 2 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x99-0x9a GPL,SL R/W 1 Host vendor specific log 0xb8 SL VS 1 Device vendor specific log 0xb9 SL VS 168 Device vendor specific log 0xba GPL VS 1280 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 8 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (20 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (2 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1005 - # 2 Short offline Completed without error 00% 1005 - # 3 Short offline Completed without error 00% 50 - # 4 Abort offline test Aborted by host 00% 50 - # 5 Extended offline Completed without error 00% 50 - # 6 Abort offline test Aborted by host 00% 50 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 0 Device State: Active (0) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 22/27 Celsius Lifetime Min/Max Temperature: 15/28 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 00 00 64 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/70 Celsius Min/Max Temperature Limit: 0/70 Celsius Temperature History Size (Index): 478 (139) Index Estimated Time Temperature Celsius 140 2018-12-18 03:21 25 ****** ... ..( 27 skipped). .. ****** 168 2018-12-18 03:49 25 ****** 169 2018-12-18 03:50 26 ******* 170 2018-12-18 03:51 26 ******* 171 2018-12-18 03:52 25 ****** ... ..(261 skipped). .. ****** 433 2018-12-18 08:14 25 ****** 434 2018-12-18 08:15 26 ******* 435 2018-12-18 08:16 26 ******* 436 2018-12-18 08:17 25 ****** 437 2018-12-18 08:18 25 ****** 438 2018-12-18 08:19 26 ******* 439 2018-12-18 08:20 25 ****** ... ..( 18 skipped). .. ****** 458 2018-12-18 08:39 25 ****** 459 2018-12-18 08:40 26 ******* 460 2018-12-18 08:41 25 ****** 461 2018-12-18 08:42 26 ******* ... ..( 2 skipped). .. ******* 464 2018-12-18 08:45 26 ******* 465 2018-12-18 08:46 25 ****** ... ..( 7 skipped). .. ****** 473 2018-12-18 08:54 25 ****** 474 2018-12-18 08:55 26 ******* 475 2018-12-18 08:56 26 ******* 476 2018-12-18 08:57 25 ****** ... ..( 88 skipped). .. ****** 87 2018-12-18 10:26 25 ****** 88 2018-12-18 10:27 ? - 89 2018-12-18 10:28 24 ***** 90 2018-12-18 10:29 ? - 91 2018-12-18 10:30 24 ***** 92 2018-12-18 10:31 25 ****** 93 2018-12-18 10:32 26 ******* ... ..( 2 skipped). .. ******* 96 2018-12-18 10:35 26 ******* 97 2018-12-18 10:36 27 ******** 98 2018-12-18 10:37 ? - 99 2018-12-18 10:38 25 ****** 100 2018-12-18 10:39 25 ****** 101 2018-12-18 10:40 ? - 102 2018-12-18 10:41 24 ***** 103 2018-12-18 10:42 24 ***** 104 2018-12-18 10:43 25 ****** ... ..( 2 skipped). .. ****** 107 2018-12-18 10:46 25 ****** 108 2018-12-18 10:47 26 ******* ... ..( 12 skipped). .. ******* 121 2018-12-18 11:00 26 ******* 122 2018-12-18 11:01 27 ******** ... ..( 10 skipped). .. ******** 133 2018-12-18 11:12 27 ******** 134 2018-12-18 11:13 ? - 135 2018-12-18 11:14 27 ******** ... ..( 3 skipped). .. ******** 139 2018-12-18 11:18 27 ******** SCT Error Recovery Control: Read: 80 (8.0 seconds) Write: 80 (8.0 seconds) Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 4 0 Command failed due to ICRC error 0x0003 4 0 R_ERR response for device-to-host data FIS 0x0004 4 0 R_ERR response for host-to-device data FIS 0x0006 4 0 R_ERR response for device-to-host non-data FIS 0x000a 4 1 Device-to-host register FISes sent due to a COMRESET 0x000b 4 0 CRC errors within host-to-device FIS 0x000d 4 0 Non-CRC errors within host-to-device FIS