smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-22-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD5000AZRX-00A8LB0 Firmware Version: 01.01A01 User Capacity: 500 107 862 016 bytes [500 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Jun 11 20:18:40 2018 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 95) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x30b5) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 139 137 021 - 4033 4 Start_Stop_Count -O--CK 100 100 000 - 59 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 098 098 000 - 1713 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 59 192 Power-Off_Retract_Count -O--CK 200 200 000 - 99 193 Load_Cycle_Count -O--CK 198 198 000 - 7701 194 Temperature_Celsius -O---K 115 107 000 - 28 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 200 200 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: DST executing in background (3) Current Temperature: 27 Celsius Power Cycle Min/Max Temperature: 18/28 Celsius Lifetime Min/Max Temperature: 18/36 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (263) Index Estimated Time Temperature Celsius 264 2018-06-11 12:21 27 ******** ... ..( 5 skipped). .. ******** 270 2018-06-11 12:27 27 ******** 271 2018-06-11 12:28 28 ********* 272 2018-06-11 12:29 27 ******** 273 2018-06-11 12:30 28 ********* ... ..( 20 skipped). .. ********* 294 2018-06-11 12:51 28 ********* 295 2018-06-11 12:52 27 ******** ... ..( 4 skipped). .. ******** 300 2018-06-11 12:57 27 ******** 301 2018-06-11 12:58 28 ********* 302 2018-06-11 12:59 27 ******** ... ..( 7 skipped). .. ******** 310 2018-06-11 13:07 27 ******** 311 2018-06-11 13:08 28 ********* 312 2018-06-11 13:09 27 ******** 313 2018-06-11 13:10 27 ******** 314 2018-06-11 13:11 29 ********** ... ..( 31 skipped). .. ********** 346 2018-06-11 13:43 29 ********** 347 2018-06-11 13:44 30 *********** 348 2018-06-11 13:45 30 *********** 349 2018-06-11 13:46 30 *********** 350 2018-06-11 13:47 29 ********** ... ..( 5 skipped). .. ********** 356 2018-06-11 13:53 29 ********** 357 2018-06-11 13:54 30 *********** ... ..(257 skipped). .. *********** 137 2018-06-11 18:12 30 *********** 138 2018-06-11 18:13 31 ************ 139 2018-06-11 18:14 30 *********** ... ..( 7 skipped). .. *********** 147 2018-06-11 18:22 30 *********** 148 2018-06-11 18:23 31 ************ 149 2018-06-11 18:24 30 *********** ... ..( 7 skipped). .. *********** 157 2018-06-11 18:32 30 *********** 158 2018-06-11 18:33 31 ************ 159 2018-06-11 18:34 30 *********** ... ..( 7 skipped). .. *********** 167 2018-06-11 18:42 30 *********** 168 2018-06-11 18:43 31 ************ 169 2018-06-11 18:44 30 *********** ... ..( 7 skipped). .. *********** 177 2018-06-11 18:52 30 *********** 178 2018-06-11 18:53 ? - 179 2018-06-11 18:54 31 ************ 180 2018-06-11 18:55 ? - 181 2018-06-11 18:56 31 ************ 182 2018-06-11 18:57 ? - 183 2018-06-11 18:58 27 ******** 184 2018-06-11 18:59 27 ******** 185 2018-06-11 19:00 28 ********* ... ..( 2 skipped). .. ********* 188 2018-06-11 19:03 28 ********* 189 2018-06-11 19:04 29 ********** 190 2018-06-11 19:05 29 ********** 191 2018-06-11 19:06 30 *********** ... ..( 2 skipped). .. *********** 194 2018-06-11 19:09 30 *********** 195 2018-06-11 19:10 ? - 196 2018-06-11 19:11 22 *** 197 2018-06-11 19:12 ? - 198 2018-06-11 19:13 25 ****** 199 2018-06-11 19:14 26 ******* ... ..( 3 skipped). .. ******* 203 2018-06-11 19:18 26 ******* 204 2018-06-11 19:19 27 ******** 205 2018-06-11 19:20 28 ********* ... ..( 2 skipped). .. ********* 208 2018-06-11 19:23 28 ********* 209 2018-06-11 19:24 ? - 210 2018-06-11 19:25 18 - 211 2018-06-11 19:26 18 - 212 2018-06-11 19:27 20 * 213 2018-06-11 19:28 20 * 214 2018-06-11 19:29 21 ** 215 2018-06-11 19:30 21 ** 216 2018-06-11 19:31 23 **** 217 2018-06-11 19:32 24 ***** ... ..( 2 skipped). .. ***** 220 2018-06-11 19:35 24 ***** 221 2018-06-11 19:36 25 ****** ... ..( 2 skipped). .. ****** 224 2018-06-11 19:39 25 ****** 225 2018-06-11 19:40 26 ******* 226 2018-06-11 19:41 26 ******* 227 2018-06-11 19:42 26 ******* 228 2018-06-11 19:43 27 ******** ... ..( 5 skipped). .. ******** 234 2018-06-11 19:49 27 ******** 235 2018-06-11 19:50 28 ********* 236 2018-06-11 19:51 27 ******** ... ..( 26 skipped). .. ******** 263 2018-06-11 20:18 27 ******** SCT Error Recovery Control command not supported Device Statistics (GP/SMART Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 1 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 6205 Vendor specific