smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.16.1-1.el7.elrepo.x86_64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2005FBYZ-01YCBB2 Firmware Version: RR07 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Form Factor: 3.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Mon Jul 2 18:16:37 2018 EEST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 96 (intermediate level with standby) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 215) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x203d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0 3 Spin_Up_Time POS--K 100 253 021 - 0 4 Start_Stop_Count -O--CK 100 100 000 - 4 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 100 100 000 - 4 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 3 16 Unknown_Attribute -O---K 000 200 000 - 654619336 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 200 200 000 - 0 193 Load_Cycle_Count -O--CK 200 200 000 - 3 194 Temperature_Celsius -O---K 115 107 000 - 32 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x08 GPL R/O 2 Power Conditions log 0x09 SL R/W 1 Selective self-test log 0x0a GPL R/W 8 Device Statistics Notification 0x0c GPL R/O 113 Pending Defects log 0x0d GPL,SL R/O 8 LPS Mis-alignment log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x13 GPL R/O 1 SATA NCQ Send and Receive log 0x24 GPL R/O 192 Current Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xb6 GPL,SL VS 16 Device vendor specific log 0xb7 GPL,SL VS 39 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 0 - # 2 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 32 Celsius Power Cycle Min/Max Temperature: 29/32 Celsius Lifetime Min/Max Temperature: 25/40 Celsius Under/Over Temperature Limit Count: 0/0 Vendor specific: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (249) Index Estimated Time Temperature Celsius 250 2018-07-02 10:19 ? - ... ..(227 skipped). .. - 0 2018-07-02 14:07 ? - 1 2018-07-02 14:08 25 ****** 2 2018-07-02 14:09 25 ****** 3 2018-07-02 14:10 25 ****** 4 2018-07-02 14:11 26 ******* 5 2018-07-02 14:12 28 ********* 6 2018-07-02 14:13 28 ********* 7 2018-07-02 14:14 28 ********* 8 2018-07-02 14:15 29 ********** 9 2018-07-02 14:16 29 ********** 10 2018-07-02 14:17 30 *********** 11 2018-07-02 14:18 30 *********** 12 2018-07-02 14:19 31 ************ ... ..( 2 skipped). .. ************ 15 2018-07-02 14:22 31 ************ 16 2018-07-02 14:23 32 ************* ... ..( 3 skipped). .. ************* 20 2018-07-02 14:27 32 ************* 21 2018-07-02 14:28 33 ************** 22 2018-07-02 14:29 33 ************** 23 2018-07-02 14:30 33 ************** 24 2018-07-02 14:31 ? - 25 2018-07-02 14:32 33 ************** ... ..( 3 skipped). .. ************** 29 2018-07-02 14:36 33 ************** 30 2018-07-02 14:37 34 *************** 31 2018-07-02 14:38 34 *************** 32 2018-07-02 14:39 34 *************** 33 2018-07-02 14:40 35 **************** ... ..( 2 skipped). .. **************** 36 2018-07-02 14:43 35 **************** 37 2018-07-02 14:44 36 ***************** ... ..( 3 skipped). .. ***************** 41 2018-07-02 14:48 36 ***************** 42 2018-07-02 14:49 37 ****************** ... ..( 7 skipped). .. ****************** 50 2018-07-02 14:57 37 ****************** 51 2018-07-02 14:58 38 ******************* ... ..( 8 skipped). .. ******************* 60 2018-07-02 15:07 38 ******************* 61 2018-07-02 15:08 39 ******************** ... ..( 8 skipped). .. ******************** 70 2018-07-02 15:17 39 ******************** 71 2018-07-02 15:18 40 ********************* ... ..( 8 skipped). .. ********************* 80 2018-07-02 15:27 40 ********************* 81 2018-07-02 15:28 ? - 82 2018-07-02 15:29 29 ********** 83 2018-07-02 15:30 29 ********** 84 2018-07-02 15:31 29 ********** 85 2018-07-02 15:32 30 *********** ... ..( 16 skipped). .. *********** 102 2018-07-02 15:49 30 *********** 103 2018-07-02 15:50 31 ************ ... ..(131 skipped). .. ************ 235 2018-07-02 18:02 31 ************ 236 2018-07-02 18:03 32 ************* ... ..( 12 skipped). .. ************* 249 2018-07-02 18:16 32 ************* SCT Error Recovery Control: Read: 70 (7.0 seconds) Write: 70 (7.0 seconds) Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 3 -D- Lifetime Power-On Resets 0x01 0x010 4 4 -D- Power-on Hours 0x01 0x018 6 654671216 -D- Logical Sectors Written 0x01 0x020 6 4240856 -D- Number of Write Commands 0x01 0x028 6 13056 -D- Logical Sectors Read 0x01 0x030 6 252 -D- Number of Read Commands 0x01 0x038 6 14400000 -D- Date and Time TimeStamp 0x01 0x048 2 1 ND- Workload Utilization 0x03 ===== = = === == Rotating Media Statistics (rev 1) == 0x03 0x008 4 4 -D- Spindle Motor Power-on Hours 0x03 0x010 4 4 -D- Head Flying Hours 0x03 0x018 4 4 -D- Head Load Events 0x03 0x020 4 0 -D- Number of Reallocated Logical Sectors 0x03 0x028 4 0 -D- Read Recovery Attempts 0x03 0x030 4 0 -D- Number of Mechanical Start Failures 0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors 0x03 0x040 4 0 -D- Number of High Priority Unload Events 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors 0x04 0x010 4 0 -D- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 32 -D- Current Temperature 0x05 0x010 1 - -D- Average Short Term Temperature 0x05 0x018 1 - -D- Average Long Term Temperature 0x05 0x020 1 41 -D- Highest Temperature 0x05 0x028 1 30 -D- Lowest Temperature 0x05 0x030 1 - -D- Highest Average Short Term Temperature 0x05 0x038 1 - -D- Lowest Average Short Term Temperature 0x05 0x040 1 - -D- Highest Average Long Term Temperature 0x05 0x048 1 - -D- Lowest Average Long Term Temperature 0x05 0x050 4 0 -D- Time in Over-Temperature 0x05 0x058 1 60 -D- Specified Maximum Operating Temperature 0x05 0x060 4 0 -D- Time in Under-Temperature 0x05 0x068 1 0 -D- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 1 -D- Number of Hardware Resets 0x06 0x010 4 1 -D- Number of ASR Events 0x06 0x018 4 0 -D- Number of Interface CRC Errors |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x8000 4 0 Vendor specific