smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.13.9-300.fc27.x86_64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: CT250MX500SSD1 Firmware Version: M3CR010 User Capacity: 250,059,350,016 bytes [250 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA >3.2 (0x1ff), 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Apr 12 17:39:01 2018 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 254 (maximum performance) Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Unknown === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 100 100 000 - 0 5 Reallocated_Sector_Ct -O--CK 100 100 010 - 0 9 Power_On_Hours -O--CK 100 100 000 - 61 12 Power_Cycle_Count -O--CK 100 100 000 - 15 171 Unknown_Attribute -O--CK 100 100 000 - 0 172 Unknown_Attribute -O--CK 100 100 000 - 0 173 Unknown_Attribute -O--CK 100 100 000 - 3 174 Unknown_Attribute -O--CK 100 100 000 - 1 180 Unused_Rsvd_Blk_Cnt_Tot PO--CK 000 000 000 - 25 183 Runtime_Bad_Block -O--CK 100 100 000 - 0 184 End-to-End_Error -O--CK 100 100 000 - 0 187 Reported_Uncorrect -O--CK 100 100 000 - 0 194 Temperature_Celsius -O---K 074 053 000 - 26 (Min/Max 0/47) 196 Reallocated_Event_Count -O--CK 100 100 000 - 0 197 Current_Pending_Sector -O--CK 100 100 000 - 0 198 Offline_Uncorrectable ----CK 100 100 000 - 0 199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0 202 Unknown_SSD_Attribute ----CK 100 100 001 - 0 206 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0 210 Unknown_Attribute -O--CK 100 100 000 - 0 246 Unknown_Attribute -O--CK 100 100 000 - 1004897834 247 Unknown_Attribute -O--CK 100 100 000 - 16753580 248 Unknown_Attribute -O--CK 100 100 000 - 1186417 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 1 Comprehensive SMART error log 0x03 GPL R/O 1 Ext. Comprehensive SMART error log 0x04 GPL,SL R/O 8 Device Statistics log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 SATA NCQ Queued Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x24 GPL R/O 88 Current Device Internal Status Data log 0x25 GPL R/O 64 Saved Device Internal Status Data log 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (1 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 60 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 1 (0x0001) SCT Support Level: 0 Device State: Active (0) Current Temperature: 26 Celsius Power Cycle Min/Max Temperature: 26/31 Celsius Lifetime Min/Max Temperature: 0/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (61) SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/100 Celsius Min/Max Temperature Limit: 0/100 Celsius Temperature History Size (Index): 128 (61) Index Estimated Time Temperature Celsius 62 2018-04-12 15:32 26 ******* 63 2018-04-12 15:33 26 ******* 64 2018-04-12 15:34 28 ********* ... ..( 3 skipped). .. ********* 68 2018-04-12 15:38 28 ********* 69 2018-04-12 15:39 26 ******* 70 2018-04-12 15:40 26 ******* 71 2018-04-12 15:41 26 ******* 72 2018-04-12 15:42 28 ********* 73 2018-04-12 15:43 28 ********* 74 2018-04-12 15:44 26 ******* 75 2018-04-12 15:45 28 ********* 76 2018-04-12 15:46 28 ********* 77 2018-04-12 15:47 26 ******* 78 2018-04-12 15:48 28 ********* 79 2018-04-12 15:49 28 ********* 80 2018-04-12 15:50 28 ********* 81 2018-04-12 15:51 26 ******* 82 2018-04-12 15:52 26 ******* 83 2018-04-12 15:53 28 ********* 84 2018-04-12 15:54 28 ********* 85 2018-04-12 15:55 28 ********* 86 2018-04-12 15:56 26 ******* 87 2018-04-12 15:57 28 ********* ... ..( 2 skipped). .. ********* 90 2018-04-12 16:00 28 ********* 91 2018-04-12 16:01 26 ******* 92 2018-04-12 16:02 28 ********* 93 2018-04-12 16:03 28 ********* 94 2018-04-12 16:04 28 ********* 95 2018-04-12 16:05 26 ******* 96 2018-04-12 16:06 28 ********* 97 2018-04-12 16:07 28 ********* 98 2018-04-12 16:08 26 ******* 99 2018-04-12 16:09 26 ******* 100 2018-04-12 16:10 28 ********* 101 2018-04-12 16:11 28 ********* 102 2018-04-12 16:12 26 ******* 103 2018-04-12 16:13 28 ********* 104 2018-04-12 16:14 28 ********* 105 2018-04-12 16:15 28 ********* 106 2018-04-12 16:16 26 ******* 107 2018-04-12 16:17 28 ********* ... ..( 5 skipped). .. ********* 113 2018-04-12 16:23 28 ********* 114 2018-04-12 16:24 26 ******* 115 2018-04-12 16:25 28 ********* 116 2018-04-12 16:26 28 ********* 117 2018-04-12 16:27 26 ******* 118 2018-04-12 16:28 28 ********* 119 2018-04-12 16:29 26 ******* 120 2018-04-12 16:30 28 ********* ... ..( 2 skipped). .. ********* 123 2018-04-12 16:33 28 ********* 124 2018-04-12 16:34 26 ******* 125 2018-04-12 16:35 28 ********* 126 2018-04-12 16:36 28 ********* 127 2018-04-12 16:37 26 ******* 0 2018-04-12 16:38 28 ********* 1 2018-04-12 16:39 28 ********* 2 2018-04-12 16:40 26 ******* 3 2018-04-12 16:41 26 ******* 4 2018-04-12 16:42 28 ********* 5 2018-04-12 16:43 28 ********* 6 2018-04-12 16:44 28 ********* 7 2018-04-12 16:45 26 ******* 8 2018-04-12 16:46 28 ********* 9 2018-04-12 16:47 28 ********* 10 2018-04-12 16:48 26 ******* 11 2018-04-12 16:49 28 ********* 12 2018-04-12 16:50 28 ********* 13 2018-04-12 16:51 26 ******* 14 2018-04-12 16:52 28 ********* 15 2018-04-12 16:53 26 ******* 16 2018-04-12 16:54 28 ********* ... ..( 3 skipped). .. ********* 20 2018-04-12 16:58 28 ********* 21 2018-04-12 16:59 26 ******* 22 2018-04-12 17:00 26 ******* 23 2018-04-12 17:01 28 ********* ... ..( 2 skipped). .. ********* 26 2018-04-12 17:04 28 ********* 27 2018-04-12 17:05 26 ******* 28 2018-04-12 17:06 28 ********* 29 2018-04-12 17:07 26 ******* 30 2018-04-12 17:08 26 ******* 31 2018-04-12 17:09 26 ******* 32 2018-04-12 17:10 28 ********* 33 2018-04-12 17:11 28 ********* 34 2018-04-12 17:12 26 ******* 35 2018-04-12 17:13 26 ******* 36 2018-04-12 17:14 28 ********* ... ..( 2 skipped). .. ********* 39 2018-04-12 17:17 28 ********* 40 2018-04-12 17:18 26 ******* 41 2018-04-12 17:19 28 ********* 42 2018-04-12 17:20 28 ********* 43 2018-04-12 17:21 28 ********* 44 2018-04-12 17:22 26 ******* 45 2018-04-12 17:23 26 ******* 46 2018-04-12 17:24 28 ********* 47 2018-04-12 17:25 31 ************ 48 2018-04-12 17:26 26 ******* 49 2018-04-12 17:27 28 ********* 50 2018-04-12 17:28 28 ********* 51 2018-04-12 17:29 28 ********* 52 2018-04-12 17:30 26 ******* ... ..( 2 skipped). .. ******* 55 2018-04-12 17:33 26 ******* 56 2018-04-12 17:34 28 ********* 57 2018-04-12 17:35 28 ********* 58 2018-04-12 17:36 26 ******* 59 2018-04-12 17:37 28 ********* 60 2018-04-12 17:38 28 ********* 61 2018-04-12 17:39 28 ********* SCT Error Recovery Control command not supported Device Statistics (GP Log 0x04) Page Offset Size Value Flags Description 0x01 ===== = = === == General Statistics (rev 1) == 0x01 0x008 4 15 --- Lifetime Power-On Resets 0x01 0x010 4 61 --- Power-on Hours 0x01 0x018 6 1004897834 --- Logical Sectors Written 0x01 0x020 6 1241589 --- Number of Write Commands 0x01 0x028 6 502744202 --- Logical Sectors Read 0x01 0x030 6 759102 --- Number of Read Commands 0x01 0x038 6 4294967296 --- Date and Time TimeStamp 0x04 ===== = = === == General Errors Statistics (rev 1) == 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors 0x04 0x010 4 1 --- Resets Between Cmd Acceptance and Completion 0x05 ===== = = === == Temperature Statistics (rev 1) == 0x05 0x008 1 26 --- Current Temperature 0x05 0x010 1 28 --- Average Short Term Temperature 0x05 0x018 1 28 --- Average Long Term Temperature 0x05 0x020 1 47 --- Highest Temperature 0x05 0x028 1 0 --- Lowest Temperature 0x05 0x030 1 45 --- Highest Average Short Term Temperature 0x05 0x038 1 0 --- Lowest Average Short Term Temperature 0x05 0x040 1 45 --- Highest Average Long Term Temperature 0x05 0x048 1 0 --- Lowest Average Long Term Temperature 0x05 0x050 4 0 --- Time in Over-Temperature 0x05 0x058 1 70 --- Specified Maximum Operating Temperature 0x05 0x060 4 0 --- Time in Under-Temperature 0x05 0x068 1 0 --- Specified Minimum Operating Temperature 0x06 ===== = = === == Transport Statistics (rev 1) == 0x06 0x008 4 70 --- Number of Hardware Resets 0x06 0x010 4 13 --- Number of ASR Events 0x06 0x018 4 0 --- Number of Interface CRC Errors 0x07 ===== = = === == Solid State Device Statistics (rev 1) == 0x07 0x008 1 0 --- Percentage Used Endurance Indicator |||_ C monitored condition met ||__ D supports DSN |___ N normalized value SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 8 Device-to-host register FISes sent due to a COMRESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000d 2 0 Non-CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC