Custom Query (1239 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (19 - 21 of 1239)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Ticket Resolution Summary Owner Reporter
#734 fixed -d megaraid,N is not implemented, FreeBSD 10.3 w/ LSI MegaRAID 9271-8i SATA/SAS and mrsas (4) driver Alex Samorukov Andrii Stesin
Description

FreeBSD 10.3 system with LSI MegaRAID 9271-8i SATA/SAS RAID controller.

Recommended (and supported) driver for this newer controller is mrsas (4) (and old mfi (4) driver is neither supported by LSI nor actively developed, it supports new controllers in some obsolete ineffective way).

mrsas (4) gives virtual drives to the OS as devices /dev/daXX although I found that /dev/passX devices are also created (/dev/daN has corresponding /dev/passN) in case it matters.

I have smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)

I want to get S.M.A.R.T. status of an SSD which MegaRAID-assigned device ID is 12, and it is hidden under /dev/da0 virtual drive.

Now what I get:

[root@chort /]# smartctl -a /dev/da0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               LSI
Product:              MR9271-8i
Revision:             3.46
User Capacity:        199,481,098,240 bytes [199 GB]
Logical block size:   512 bytes
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
[root@chort /]# 
[root@chort /]# smartctl -a /dev/pass0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               LSI
Product:              MR9271-8i
Revision:             3.46
User Capacity:        199,481,098,240 bytes [199 GB]
Logical block size:   512 bytes
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
[root@chort /]# 
[root@chort /]# smartctl -a -d megaraid,12 /dev/da0
smartctl 6.5 2016-05-07 r4318 [FreeBSD 10.3-STABLE amd64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/da0: Unknown device type 'megaraid,12'
=======> VALID ARGUMENTS ARE: ata, scsi, nvme[,NSID], sat[,auto][,N][+TYPE], usbcypress[,X], usbjmicron[,p][,x][,N], usbprolific, usbsunplus, 3ware,N, hpt,L/M/N, cciss,N, areca,N/E, atacam, auto, test <=======

Use smartctl -h to get a usage summary

[root@chort /]#

Can anything be done about this? I badly need to monitor S.M.A.R.T. status of my SAS/SATA drives under the MegaRAID...

Thanks in advance! WBR, Andrii

#922 fixed -l devstat does not work if gp devstat log is 256 sectors Christian Franke oddbondboris
Description

smartctl does not use the 9 bit value from the directory properly and instead reads the value 256 as zero

Steps to reproduce: smartctl -l devstat /dev/sdX on any drive that has a directory such as this

0x04       GPL     R/O    256  Device Statistics log

Expected behavior: print device statistics patched version shown

#smartctl -l devstat /dev/sdd
smartctl 6.7 2017-11-06 r4602 [x86_64-linux-4.9.16-gentoo] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

Device Statistics (GP Log 0x04)
Page  Offset Size        Value Flags Description
0x01  =====  =               =  ===  == General Statistics (rev 1) ==
0x01  0x008  4               6  ---  Lifetime Power-On Resets
0x01  0x010  4             913  ---  Power-on Hours
....

Actual Behavior

#smartctl -l devstat /dev/sdd
smartctl 6.7 2017-11-06 r4602 [x86_64-linux-4.9.16-gentoo] (local build)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org

Device Statistics (GP/SMART Log 0x04) not supported

fix: included patch, enable already existing code to parse >8bit values in GetNumLogSectors? when reading gplog devstat logs.

#1127 wontfix -l selftest should display current power on/lifetime hours Matthias Hörmann
Description

The LifeTime(hours) column in the smartctl -l selftest output would be much more useful if the output also displayed the current value for this, allowing the user to see how long ago the tests actually ran. Instead, currently one has to look at the output of e.g. smartctl -a to check the power on hours manually before that column is of any use other than as a relative time between different tests in the log.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
Note: See TracQuery for help on using queries.