Custom Query (1110 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (124 - 126 of 1110)

Ticket Resolution Summary Owner Reporter
#1224 duplicate Add support for NVMe 1.3 Device Self-tests Christian Franke
Description

NVM Express Revision 1.3 adds optional Device Self-tests. This includes a short and an extended self-test operation and a Device Self-test log page.

This should be supported by smartctl (-t TEST, -l selftest) and smartd (-l selftest, -s REGEXP).

#1315 fixed Add support for Realtek RTL9210 USB to NVMe bridge Christian Franke BradGeeeeeeeeeeeeeeeeeee
Description

Hello! I have a RTL9210 based NVME to USB adapter and would like to request for this chip to be supported by Smartmontools. I googled around but did not find any prior discussion about this particular adapter type.

Here is output from my adapter with an NVME drive installed:

# sudo smartctl -x -d scsi /dev/disk/by-id/usb-Samsung_SSD_960_EVO_250G_012345678905-0\:0
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-3-amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Samsung
Product:              SSD 960 EVO 250G
Revision:             CXE7
Compliance:           SPC-4
User Capacity:        250,059,350,016 bytes [250 GB]
Logical block size:   512 bytes
Physical block size:  8388608 bytes
Lowest aligned LBA:   10016
LU is fully provisioned [LBPRZ=1]
Rotation Rate:        Solid State Device
Logical Unit id:      0x3001237923792379
Serial number:        0000000000000000
Device type:          disk
Local Time is:        Sun Apr  5 21:01:15 2020 PDT
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Disabled or Not Supported
Read Cache is:        Enabled
Writeback Cache is:   Enabled

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

Device does not support Self Test logging
Device does not support Background scan results logging

The USB ID is 0bda:9210. Let me know if you want full lsusb -vv output.

Orico has two models with this chip; the PFM2-C3 and the M2PG-C3. Pluaggable has switched their USBC-NVME from using the JMicron JMS583 to the RTL9210. JEYI makes the i9 GTR and and another where I'm not sure what the model number is. And finally there's a ton of cheapo no-name Chinese brand adapters on the market.

If there is anything I can do to help make this happen, please ask!

#1479 worksforme Add support for Realtek RTL9210B USB to SATA bridge David
Description

I just bought a Sabrent USB adapter containing the RTL9210B which supports both NVME and SATA M.2 disks. I have a SATA disk installed but I can´t read any smart data. Would it be possible to add support for this chipset? I saw another ticket, 1315, asking for added support, but then for the chipset without B, which seems only NVME. I now get (when using smartctl -d scsi -a /dev/sdb):

smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.11.16-1-default] (SUSE RPM)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               Sabrent
Product:              
Revision:             1.00
Compliance:           SPC-4
User Capacity:        1.000.204.886.016 bytes [1,00 TB]
Logical block size:   512 bytes
Physical block size:  4096 bytes
LB provisioning type: not reported [LBPME=1, LBPRZ=0]
Rotation Rate:        Solid State Device
Logical Unit id:      0x3001237923792379
Serial number:        0000000000000000
Device type:          disk
Local Time is:        Wed Apr 28 17:46:12 2021 CEST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Disabled or Not Supported

=== START OF READ SMART DATA SECTION ===
SMART Health Status: OK
Current Drive Temperature:     0 C
Drive Trip Temperature:        0 C

Error Counter logging not supported

Device does not support Self Test logging

If I execute: smartctl -d test -a /dev/sdb I get:

/dev/sdb [USB NVMe Realtek]: Device of type 'sntrealtek' [NVMe] detected
/dev/sdb [USB NVMe Realtek]: Device of type 'sntrealtek' [NVMe] opened

Thanks in advance.

Note: See TracQuery for help on using queries.