Custom Query (1358 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (10 - 12 of 1358)

1 2 3 4 5 6 7 8 9 10 11 12 13 14
Ticket Resolution Summary Owner Reporter
#11 fixed smartctl is verbose even with the option quietmode=errorsonly Christian Franke Giuseppe Iuculano
Description

Hi,

svn r2879: smartctl is verbose even with the option quietmode=errorsonly.

+ smartctl --test=short --quietmode=errorsonly /dev/sda1 smartctl 5.39 2009-08-29 r2879 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION

Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 1 minutes for test to complete. Test will complete after Wed Sep 9 04:37:01 2009

Use smartctl -X to abort test.

Original bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=545784

#13 fixed Autodetection doesn't work with -d sat Christian Franke Giuseppe Iuculano
Description

Hi,

with:

DEVICESCAN -d sat -n standby -m root -M exec /usr/share/smartmontools/smartd-runner -M test

I got:

# smartd -d smartd 5.39 2009-08-29 r2879 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

Opened configuration file /etc/smartd.conf Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices In the system's table of devices NO devices found to scan Unable to monitor any SMART enabled devices. Try debug (-d) option. Exiting...

But with: DEVICESCAN -n standby -m root -M exec /usr/share/smartmontools/smartd-runner -M test

autodetection works:

# smartd -d smartd 5.39 2009-08-29 r2879 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

Opened configuration file /etc/smartd.conf Drive: DEVICESCAN, implied '-a' Directive on line 23 of file /etc/smartd.conf Configuration file /etc/smartd.conf was parsed, found DEVICESCAN, scanning devices Device: /dev/hda, opened Device: /dev/hda, packet devices [this device CD/DVD] not SMART capable Unable to register ATA device /dev/hda at line 23 of file /etc/smartd.conf Device: /dev/hdc, opened Device: /dev/hdc, packet devices [this device CD/DVD] not SMART capable Unable to register ATA device /dev/hdc at line 23 of file /etc/smartd.conf Device: /dev/sda, type changed from 'scsi' to 'sat' Device: /dev/sda [SAT], opened Device: /dev/sda [SAT], found in smartd database. Device: /dev/sda [SAT], is SMART capable. Adding to "monitor" list. Device: /dev/sdb, type changed from 'scsi' to 'sat' Device: /dev/sdb [SAT], opened Device: /dev/sdb [SAT], found in smartd database. Device: /dev/sdb [SAT], is SMART capable. Adding to "monitor" list. Monitoring 2 ATA and 0 SCSI devices

Original bug report: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=546566

#15 fixed -d megaraid with SATA drives requires -T permissive to work somebody Alex Samorukov
Description

I have 2 DELL PERC 6/i controllers on different servers. Only difference is that first is connected to SATA drives and second - to SAS. While there is no problems at all with SAS drive, SATA is not working w/o -T permissive:

Output from controller with SAS drives:

smartctl 5.39 2009-09-22 r2922M [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

Creating /dev/megaraid_sas_ioctl_node = 17 Got MegaRAID inquiry.. FUJITSU MAX3073RC D206 Device: FUJITSU MAX3073RC Version: D206 Serial number: DQA3P6700JF9 Device type: disk Transport protocol: SAS Local Time is: Wed Sep 23 17:29:54 2009 EDT Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK

Current Drive Temperature: 29 C [SKIP]

Output from controller with SATA drives: [root@var-dev smartmontools]# ./smartctl /dev/sda -d megaraid,0 -i -a smartctl 5.39 2009-09-22 r2922 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

Creating /dev/megaraid_sas_ioctl_node = 17 Got MegaRAID inquiry.. ATA WDC WD5000AACS-01B01 /dev/sda [megaraid_disk_00] [SAT]: Device open changed type from 'megaraid' to 'sat'

START OF INFORMATION SECTION

Model Family: Western Digital Caviar Green family Device Model: WDC WD5000AACS-00ZUB0 Serial Number: WD-WCASU7381205 Firmware Version: 01.01B01 User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Sep 23 14:31:46 2009 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled

Rejecting SMART/ATA command to controller Rejecting SMART/ATA command to controller Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/ A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.

Trying -T permissive, and, bingo, it works!

smartctl 5.39 2009-09-22 r2922 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-9 by Bruce Allen, http://smartmontools.sourceforge.net

Creating /dev/megaraid_sas_ioctl_node = 17 Got MegaRAID inquiry.. ATA WDC WD5000AACS-01B01 /dev/sda [megaraid_disk_00] [SAT]: Device open changed type from 'megaraid' to 'sat'

START OF INFORMATION SECTION

Model Family: Western Digital Caviar Green family Device Model: WDC WD5000AACS-00ZUB0 Serial Number: WD-WCASU7381205 Firmware Version: 01.01B01 User Capacity: 500,107,862,016 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Wed Sep 23 14:32:31 2009 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled

Rejecting SMART/ATA command to controller Rejecting SMART/ATA command to controller Error SMART Status command failed Please get assistance from http://smartmontools.sourceforge.net/

START OF READ SMART DATA SECTION

SMART overall-health self-assessment test result: PASSED

General SMART Values: Offline data collection status: (0x84) Offline data collection activity

was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled.

Self-test execution status: ( 0) The previous self-test routine completed

without error or no self-test has ever been run.

[SKIP]

1 2 3 4 5 6 7 8 9 10 11 12 13 14
Batch Modify
Note: See TracBatchModify for help on using batch modify.
Note: See TracQuery for help on using queries.