Custom Query (1357 matches)

$ sudo smartctl /dev/sdc # Seagate Backup Plus 5 TB
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.8-300.fc25.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sdc: Unknown USB bridge [0x0bc2:0x3322 (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

$ sudo smartctl -d sat /dev/sdc
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.8-300.fc25.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

ATA device successfully opened

Use 'smartctl -a' (or '-x') to print SMART (and more) information

$ sudo smartctl /dev/sdf # Seagate Backup Plus 8 TB
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.8-300.fc25.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

/dev/sdf: Unknown USB bridge [0x0bc2:0xab38 (0x100)]
Please specify device type with the -d option.

Use smartctl -h to get a usage summary

$ sudo smartctl -d sat /dev/sdf
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.8.8-300.fc25.x86_64] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

ATA device successfully opened

Use 'smartctl -a' (or '-x') to print SMART (and more) information

$

Greetings!

when used 5.38 to smartctl with Ah options,

it reported fail problem on “Log Sense failed, IE page [scsi response fails sanity test]”.looks like it is due to pBuf is not equal to pagenum

but it is not occurred in 6.1 version. so what is difference between 6.1 and 5.38.

for detail error messages and related source code is below

line300:pagenum:0x2f line302:pBuf[0]:0xaf line302:pBuf[1]:0x00 line302:pBuf[2]:0x00 line302:pBuf[3]:0x0c

Source code. /* sanity check on response */

if ((SUPPORTED_LPAGES != pagenum) && (pBuf[0] != pagenum))

Log sense response:

Hi,

When upgrading smartctl from version 6.6 to 7.0, most of the SMART informations are no longer displayed on a Samsung PM1633a. The inquiry is still working, but there is no selftest results, no phy details, and so on.

The server setup is :

• Supermicro 2028R-DE2CR24L, with an embedded LSI 3008 HBA + an LSI SAS3x40 expander
• 24x Samsung MZILS3T8HMLH/007 (PM1633a)
• Debian 8 + custom kernel (4.19.67)

smartctl is compiled with the following arguments :

--with-nvme-devicescan --with-gnupg=no --with-initscriptdir=no --with-exampledir=no --with-drivedbdir=no --with-smartdscriptdir=no --with-smartdplugindir=no --with-systemdsystemunitdir=no

I added the output of the following commands, for both version 6.6 and 7.0 :

• smartctl -x /dev/sda
• smartctl -x /dev/sda -r ioctl,2

Feel free to ask if you need more details.

As a side note : Ticket #1225 might be the same issue, but I'm not sure of that.