Custom Query (1240 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (10 - 12 of 1240)

1 2 3 4 5 6 7 8 9 10 11 12 13 14
Ticket Resolution Summary Owner Reporter
#500 wontfix ServeRAID M5015 support ausuttonc
Description

Can support for the above controller be added?

Currently when I run

smartctl --scan
/dev/sda -d scsi # /dev/sda, SCSI device
/dev/sdb -d scsi # /dev/sdb, SCSI device

smartctl -a --all /dev/sda
=== START OF INFORMATION SECTION ===
Vendor:               IBM
Product:              ServeRAID M5015
Revision:             2.12
User Capacity:        145,999,527,936 bytes [145 GB]
Logical block size:   512 bytes
Logical Unit id:      0x600605b003b21a101bfcb9212751c03d
Serial number:        003dc0512721b9fc1b101ab203b00506
Device type:          disk
Local Time is:        Mon Dec 01 10:13:19 2014 AUSEDT
SMART support is:     Unavailable - device lacks SMART capability.

=== START OF READ SMART DATA SECTION ===

Error Counter logging not supported

Device does not support Self Test logging

If I use a commercial tool I can access the SMART information

#501 wontfix make smartctl into a library Folkert van Heusden
Description

It would be great if smartctl was functionally split into a commandline tool and a library. That library could then be linked into third party applications. This is assuming that smartctl has no easily parseable output.

#507 invalid Strange attributes on Seagate Constellation ES.3 Mathew Binkley
Description

We normally monitor SMART attribute 5 Reallocated_Sector_Ct to predict drive failure. Recently we received a shipment of replacement drives (Seagate Constellation ES.3) that don't appear to have SMART attributes in any version of smartctl, up to and including SVN from 12/18/14.

Is it just that support for these drives hasn't yet been added to smartmontools, or is there something new/peculiar about these drives?

Info:

# ./smartctl -i /dev/sdae
smartctl 6.4 2014-12-13 r4030 [x86_64-linux-3.13.0-43-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Vendor:               SEAGATE
Product:              ST4000NM0023
Revision:             0004
Compliance:           SPC-4
User Capacity:        4,000,787,030,016 bytes [4.00 TB]
Logical block size:   512 bytes
LB provisioning type: unreported, LBPME=0, LBPRZ=0
Rotation Rate:        7200 rpm
Form Factor:          3.5 inches
Logical Unit id:      0x5000c500626b0313
Serial number:        Z1Z5PQ6Z0000C509C0UY
Device type:          disk
Transport protocol:   SAS (SPL-3)
Local Time is:        Thu Dec 18 16:04:45 2014 CST
SMART support is:     Available - device has SMART capability.
SMART support is:     Enabled
Temperature Warning:  Enabled

# ./smartctl --attributes /dev/sdae
smartctl 6.4 2014-12-13 r4030 [x86_64-linux-3.13.0-43-generic] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
Current Drive Temperature:     33 C
Drive Trip Temperature:        60 C

Manufactured in week 37 of year 2014
Specified cycle count over device lifetime:  10000
Accumulated start-stop cycles:  96
Specified load-unload count over device lifetime:  300000
Accumulated load-unload cycles:  127
Elements in grown defect list: 0

Vendor (Seagate) cache information
  Blocks sent to initiator = 2968316052
  Blocks received from initiator = 3752175265
  Blocks read from cache and sent to initiator = 2227814356
  Number of read and write commands whose size <= segment size = 13010546
  Number of read and write commands whose size > segment size = 759449

Vendor (Seagate/Hitachi) factory information
  number of hours powered up = 887.18
  number of minutes until next internal SMART test = 0
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Note: See TracQuery for help on using queries.