Custom Query (1096 matches)

Filters
 
Or
 
  
 
Columns

Show under each result:


Results (106 - 108 of 1096)

Ticket Resolution Summary Owner Reporter
#774 wontfix Add machine-readable output formating lynxchaus
Description

Patch adds machine simple comma-delimited output format.

example output: # smartctl -A -f machine /dev/sda 1,Raw_Read_Error_Rate,0x000f,117,97,6,Pre-fail,Always,-,133234088 3,Spin_Up_Time,0x0003,96,95,0,Pre-fail,Always,-,0 4,Start_Stop_Count,0x0032,99,99,20,Old_age,Always,-,1386 5,Reallocated_Sector_Ct,0x0033,100,100,36,Pre-fail,Always,-,0 7,Seek_Error_Rate,0x000f,78,60,30,Pre-fail,Always,-,81588632 9,Power_On_Hours,0x0032,86,86,0,Old_age,Always,-,12439 10,Spin_Retry_Count,0x0013,100,100,97,Pre-fail,Always,-,0 12,Power_Cycle_Count,0x0032,99,99,20,Old_age,Always,-,1391 187,Reported_Uncorrect,0x0032,97,97,0,Old_age,Always,-,3 189,High_Fly_Writes,0x003a,100,100,0,Old_age,Always,-,0 190,Airflow_Temperature_Cel,0x0022,48,43,45,Old_age,Always,In_the_past,52 (Min/Max? 25/52 #152) 194,Temperature_Celsius,0x0022,52,57,0,Old_age,Always,-,52 (0 17 0 0 0) 195,Hardware_ECC_Recovered,0x001a,45,42,0,Old_age,Always,-,19427128 197,Current_Pending_Sector,0x0012,100,100,0,Old_age,Always,-,1 198,Offline_Uncorrectable,0x0010,100,100,0,Old_age,Offline,-,1 199,UDMA_CRC_Error_Count,0x003e,200,200,0,Old_age,Always,-,0 200,Multi_Zone_Error_Rate,0x0000,100,253,0,Old_age,Offline,-,0 202,Data_Address_Mark_Errs,0x0032,100,253,0,Old_age,Always,-,0

#1156 wontfix Add more prominent warning if SMART features are disabled/impaired Stilez
Description

I just bought a Seagate SAS-3 HDD ST8000NM0075. I notice it wasn't producing SMART data although SMART was enabled, and eventually discovered the GLTSD bit, which apparently comes preset to "on", disabling SMART attribute storage (I think - a bit hazy about this!). I've just disabled it and hoping that helps.

The point being, this restriction wasn't obvious in the smartctl output at all. It's true that if I read every line of smartctl -x, there's a mention buried somewhere round line 300 about "GLSTD" being "off", but the term doesn't mean anything to most people who own or use a hard drive, and most won't dig into such output and question every line.

So this is a request, if there is a reason why smartctl thinks it might be impaired in its drive interrogation, due to SMART being disabled, SMART data or log storage being disabled, expected log pages not being found, etc, can that be stated in a clear prominent way, at the top of the output, so it's not easily missed?

It doesn't have to take much room. Just stating "Diagnostic output may be incomplete, due to disabled or inaccessible features on this device: <brief list>." would be enough.

Thanks!

#668 fixed Add new Apple SSD to drive database beren
Description

The new Apple SSDs seem to have the same odd values. Someone added 173 as Wear_Leveling_Count which doesn't seem right to me. I added the G model to my local copy.

=== START OF INFORMATION SECTION ===
Model Family:     Apple SD/SM/TS...E/F SSDs
Device Model:     APPLE SSD SM0512G
Firmware Version: BXW1SA0Q
User Capacity:    500,277,790,720 bytes [500 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4c
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Mar 14 12:13:03 2016 EDT


ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x001a   200   200   000    Old_age   Always       -       0
  5 Reallocated_Sector_Ct   0x0033   100   100   000    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1060
 12 Power_Cycle_Count       0x0032   094   094   000    Old_age   Always       -       5651
169 Unknown_Attribute       0x0013   221   221   010    Pre-fail  Always       -       4222129014656
173 Wear_Leveling_Count     0x0032   198   198   100    Old_age   Always       -       30069096468
174 Host_Reads_MiB          0x0022   099   099   000    Old_age   Always       -       7219227
175 Host_Writes_MiB         0x0022   099   099   000    Old_age   Always       -       8097664
192 Power-Off_Retract_Count 0x0012   099   099   000    Old_age   Always       -       67
194 Temperature_Celsius     0x0022   077   019   000    Old_age   Always       -       23 (Min/Max 14/83)
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x001a   200   200   000    Old_age   Always       -       0

Note: See TracQuery for help on using queries.