Custom Query (1347 matches)
Results (91 - 93 of 1347)
Ticket | Resolution | Summary | Owner | Reporter |
---|---|---|---|---|
#139 | wontfix | smartctl can not modify CCTL ( TLER equivalent) on Hitachi UltraStar on LSI 1068 SAS controller. | ||
Description |
Using Hitachi 1TB UltraStar disks, HUA722010CLA330 On LSI1068 embedded SAS chip (on motherboard) OS: CentOS 5.1 on ROCKS5 cluster. Updated mptsas driver to mptlinux-4.24.00.00-2.x86_64 smartmontools 5.40 kernel 2.6.18-194.11.3.el5 Trying to read/modify CCTL settings. Fails to communicate with the drives CCTL. CAN see drives. Examples: smartctl -l scterc /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) Probable ATA device behind a SAT layer Try an additional '-d ata' or '-d sat' argument. [root@lagavulin ~]# smartctl -d sat -T permissive -l scterc /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) Smartctl: Device Read Identity Failed (not an ATA/ATAPI device) Warning: device does not support SCT Commands A couple more tests show that it thinks it's a scsi device, and then '-l scterc' returns nothing. This is true for both Hitachi and Seagate drives. [root@lagavulin ~]# smartctl -d test /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) /dev/sda: Device of type 'scsi' [SCSI] detected /dev/sda: Device of type 'scsi' [SCSI] opened [root@lagavulin ~]# smartctl -a -d scsi /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) Serial number: JPW9J0HD0DD0TC Device type: disk Local Time is: Wed Dec 1 13:25:04 2010 EST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Error Counter logging not supported Device does not support Self Test logging [root@lagavulin ~]# smartctl -a -d scsi /dev/sdb smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) Serial number: 3QJ01G92 Device type: disk Local Time is: Wed Dec 1 13:37:03 2010 EST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Error Counter logging not supported Device does not support Self Test logging [root@lagavulin ~]# smartctl -d scsi -l scterc /dev/sda smartctl 5.40 2010-10-16 r3189 [x86_64-redhat-linux-gnu] (local build) Verifying current versions and earlier problems with lockups on the mptsas device we tried this test: # while true; do smartctl -a /dev/sdb > /dev/null; done This produced no errors or lockups. Is there SOME WAY to set CCTL on these drives?? |
|||
#637 | fixed | smartctl and smartd should not issue SCT commands if drive is locked | ||
Description |
If drive is locked using ATA security features running
|
|||
#1331 | duplicate | smartctl 7.1 doesn't show attributes on Seagate SAS drives but 6.6 does | ||
Description |
For this I'm using a Dell R720xd with an LSI 9211-8i HBA in IT Mode and a Seagate ST3300657SS. I'm testing 7.1 using Debian Buster and 6.6 using Ubuntu Bionic because that is the default version they come with. If there are downstream code changes by the distribution responsible for this difference I apologize and will redirect my issue there. Here is the result from Debian Buster root@cloud1:~# smartctl -a /dev/sda smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.3.18-2-pve] (local build) Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST3300657SS Revision: 000B Compliance: SPC-3 User Capacity: 300,000,000,000 bytes [300 GB] Logical block size: 512 bytes Rotation Rate: 15000 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c5008db145bb Serial number: 6SJ840DR0000N4381HL2 Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Mon May 11 09:32:19 2020 CDT SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 0 C Drive Trip Temperature: 0 C Elements in grown defect list: 0 Error Counter logging not supported Device does not support Self Test logging And here is the result for the same drive from Ubuntu Bionic root@ubuntu:~# smartctl -a /dev/sda smartctl 6.6 2016-05-31 r4324 [x86_64-linux-5.0.0-23-generic] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Vendor: SEAGATE Product: ST3300657SS Revision: 000B User Capacity: 300,000,000,000 bytes [300 GB] Logical block size: 512 bytes Rotation Rate: 15000 rpm Form Factor: 3.5 inches Logical Unit id: 0x5000c5008db145bb Serial number: 6SJ840DR0000N4381HL2 Device type: disk Transport protocol: SAS (SPL-3) Local Time is: Mon May 11 14:48:23 2020 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled Temperature Warning: Enabled === START OF READ SMART DATA SECTION === SMART Health Status: OK Current Drive Temperature: 33 C Drive Trip Temperature: 68 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 1460697 Blocks received from initiator = 8989202 Blocks read from cache and sent to initiator = 170255 Number of read and write commands whose size <= segment size = 79689 Number of read and write commands whose size > segment size = 1 Vendor (Seagate/Hitachi) factory information number of hours powered up = 13257.17 number of minutes until next internal SMART test = 34 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 21440 0 0 21440 21440 0.748 0 write: 0 0 0 0 0 4.628 0 verify: 1976 0 0 1976 1976 0.000 0 Non-medium error count: 0 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed - 366 - [- - -] # 2 Background short Completed - 1 - [- - -] # 3 Background short Completed - 0 - [- - -] Long (extended) Self Test duration: 3200 seconds [53.3 minutes] |